Cai, Q., Zhou, M., Bagherpour, E., Hosseini, S., Mendis, C., Chang, I. and Assadi, H. et al. (2023) 'New Insight Into Crack-Healing Mechanism via Electropulsing Treatment'. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 54 (7). pp. 2960 - 2974. ISSN: 1073-5623 Open Access Link

Abdi, M., Ebrahimi, R. and Bagherpour, E. (2022) 'Improvement of Hydrogenation and Dehydrogenation Kinetics of As-Cast AZ91 Magnesium Alloy via Twin Parallel Channel Angular Extrusion Processing'. Crystals, 12 (10). pp. 1 - 15.Open Access Link

Rifai, M., Mujamilah, M., Bagherpour, E. and Miyamoto, H. (2022) 'Effect of strain energy on corrosion behavior of ultrafine grained copper prepared by severe plastic deformation'. Journal of Mining and Metallurgy, Section B: Metallurgy, 58 (2). pp. 335 - 344. ISSN: 1450-5339 Open Access Link

Bagherpour, E., Reihanian, M., Ebrahimi, R., Qods, F. and Miyamoto, H. (2020) 'Role of strain reversal in microstructure and texture of pure al during non-monotonic simple shear straining'. Crystals, 10 (10). pp. 1 - 15. ISSN: 2073-4352 Open Access Link

Rezvani, A., Bagherpour, E. and Ebrahimi, R. (2020) 'Circular Simple Shear Extrusion as an Alternative to Simple Shear Extrusion Technique'. Iranian Journal of Science and Technology - Transactions of Mechanical Engineering, 44 (1). pp. 193 - 201. ISSN: 2228-6187

Bagherpour, E., Mortezaei, S., Ebrahimi, R., Miyamoto, H. and Qods, F. (2019) 'On the Production of Severely Deformed Workpieces in Large Scales: A Step Towards Industrialization'. JOM, 71 (12). pp. 4424 - 4435. ISSN: 1047-4838 Open Access Link

Alipour Behzadi, M., Ranjbar, K., Dehmolaei, R. and Bagherpour, E. (2019) 'Friction-stir-welded overaged 7020-T6 alloy joint: an investigation on the effect of rotational speed on the microstructure and mechanical properties'. International Journal of Minerals, Metallurgy and Materials, 26 (5). pp. 622 - 633. ISSN: 1674-4799

Bagherpour, E., Huang, Y. and Fan, Z. (2019) 'Assessment of self-piercing riveted joints using the analytic hierarchy process'. Metals, 9 (7). pp. 1 - 16.Open Access Link

Bagherpour, E., Pardis, N., Reihanian, M. and Ebrahimi, R. (2018) 'An overview on severe plastic deformation: research status, techniques classification, microstructure evolution, and applications'. International Journal of Advanced Manufacturing Technology, 100 (5-8). pp. 1647 - 1694. ISSN: 0268-3768 Open Access Link

Ebrahimi, R., Rezvani, A. and Bagherpour, E. (2018) 'Circular simple shear extrusion as an alternative for simple shear extrusion technique for producing bulk nanostructured materials'.17th International Conference on Metal Forming. Toyohashi, Japan. 11 - 19 September. Elsevier BV. pp. 1502 - 1508. ISSN: 2351-9789 Open Access Link

Bagherpour, E., Qods, F., Ebrahimi, R. and Miyamoto, H. (2018) 'Microstructure and texture inhomogeneity after large non-monotonic simple shear strains: Achievements of tensile properties'. Metals, 8 (8). pp. 1 - 17. ISSN: 2075-4701 Open Access Link

Gostariani, R., Bagherpour, E., Rifai, M., Ebrahimi, R. and Miyamoto, H. (2018) 'Fabrication of Al/AlN in-situ nanocomposite through planetary ball milling and hot extrusion of Al/BN: Microstructural evaluation and mechanical behavior'. Journal of Alloys and Compounds, 768. pp. 329 - 339. ISSN: 0925-8388 Open Access Link

Rifai, M., Bagherpour, E., Yamamoto, G., Yuasa, M. and Miyamoto, H. (2018) 'Transition of Dislocation Structures in Severe Plastic Deformation and Its Effect on Dissolution in Dislocation Etchant'. Advances in Materials Science and Engineering, 2018 (1). pp. 1 - 6. ISSN: 1687-8434 Open Access Link

Bagherpour, E., Qods, F., Ebrahimi, R. and Miyamoto, H. (2018) 'Strain reversal in simple shear extrusion (SSE) processing: Microstructure investigations and mechanical properties'.6TH INTERNATIONAL BIENNIAL CONFERENCE ON ULTRAFINE GRAINED AND NANOSTRUCTURED MATERIALS: (UFGNSM2017). IRAN. 10 - 13 November. Author(s). pp. 020007 - 020007. ISSN: 0094-243X

Kitano, Y., Yuasa, M., Miyamoto, H., Farshidi, MH. and Bagherpour, E. (2017) 'Improving hydro-formability of stainless steel tubes by tube channel pressing'.7th International Conference on Nanomaterials by Severe Plastic Deformation. Sydney, Australia. 8 - 7 July. IOP Publishing. pp. 1 - 6. ISSN: 1757-8981 Open Access Link

Bagherpour, E., Reihanian, M. and Miyamoto, H. (2017) 'Tailoring particle distribution non-uniformity and grain refinement in nanostructured metal matrix composites fabricated by severe plastic deformation (SPD): a correlation with flow stress'. Journal of Materials Science, 52 (6). pp. 3436 - 3446. ISSN: 0022-2461

Bagherpour, E., Qods, F., Ebrahimi, R. and Miyamoto, H. (2017) 'Nanostructured pure copper fabricated by simple shear extrusion (SSE): A correlation between microstructure and tensile properties'. Materials Science and Engineering: A, 679. pp. 465 - 475. ISSN: 0921-5093

Sheikh, H., Ebrahimi, R. and Bagherpour, E. (2016) 'Crystal plasticity finite element modeling of crystallographic textures in simple shear extrusion (SSE) process'. Materials and Design, 109. pp. 289 - 299. ISSN: 0264-1275

Bagherpour, E., Qods, F., Ebrahimi, R. and Miyamoto, H. (2016) 'Microstructure quantification of ultrafine grained pure copper fabricated by simple shear extrusion (SSE) technique'. Materials Science and Engineering: A, 674. pp. 221 - 231. ISSN: 0921-5093

Bagherpour, E., Qods, F., Ebrahimi, R. and Miyamoto, H. (2016) 'Microstructure evolution of pure copper during a single pass of simple shear extrusion (SSE): Role of shear reversal'. Materials Science and Engineering: A, 666. pp. 324 - 338. ISSN: 0921-5093

Bagherpour, E., Qods, F., Ebrahimi, R. and Miyamoto, H. (2016) 'Texture changes during simple shear extrusion (SSE) processing of pure copper'. Materials Transactions, 57 (9). pp. 1386 - 1391. ISSN: 1345-9678

Bagherpour, E., Ebrahimi, R. and Qods, F. (2015) 'An analytical approach for simple shear extrusion process with a linear die profile'. Materials and Design, 83. pp. 368 - 376. ISSN: 0264-1275

Hassani, A., Bagherpour, E. and Qods, F. (2014) 'Influence of pores on workability of porous Al/SiC composites fabricated through powder metallurgy + mechanical alloying'. Journal of Alloys and Compounds, 591. pp. 132 - 142. ISSN: 0925-8388

Zafarani, HR., Hassani, A. and Bagherpour, E. (2014) 'Achieving a desirable combination of strength and workability in Al/SiC composites by AHP selection method'. Journal of Alloys and Compounds, 589. pp. 295 - 300. ISSN: 0925-8388

Habibolahzadeh, A., Hassani, A., Bagherpour, E. and Taheri, M. (2014) 'Dry friction and wear behavior of in-situ Al/Al3Ti composite'. Journal of Composite Materials, 48 (9). pp. 1049 - 1059. ISSN: 0021-9983

Reihanian, M., Bagherpour, E. and Paydar, MH. (2013) 'On the achievement of uniform particle distribution in metal matrix composites fabricated by accumulative roll bonding'. Materials Letters, 91. pp. 59 - 62. ISSN: 0167-577X

Bagherpour, E., Reihanian, M. and Ebrahimi, R. (2012) 'Processing twining induced plasticity steel through simple shear extrusion'. Materials and Design, 40. pp. 262 - 267. ISSN: 0264-1275

Bagherpour, E., Reihanian, M. and Ebrahimi, R. (2012) 'On the capability of severe plastic deformation of twining induced plasticity (TWIP) steel'. Materials and Design, 36. pp. 391 - 395. ISSN: 0264-1275

Reihanian, M., Bagherpour, E. and Paydar, MH. (2012) 'Particle distribution in metal matrix composites fabricated by accumulative roll bonding'. Materials Science and Technology, 28 (1). pp. 103 - 108. ISSN: 0267-0836

Reihanian, M., Bagherpour, E. and Paydar, MH. (2009) 'A model for volume fraction and particle size selection in tri-modal metal matrix composites'. Materials Science and Engineering: A, 513-514 (C). pp. 172 - 175. ISSN: 0921-5093

Paydar, MH., Reihanian, M., Bagherpour, E., Sharifzadeh, M., Zarinejad, M. and Dean, TA. (2009) 'Equal channel angular pressing-forward extrusion (ECAP-FE) consolidation of Al particles'. Materials and Design, 30 (3). pp. 429 - 432. ISSN: 0264-1275

Paydar, MH., Reihanian, M., Bagherpour, E., Sharifzadeh, M., Zarinejad, M. and Dean, TA. (2008) 'Consolidation of Al particles through forward extrusion-equal channel angular pressing (FE-ECAP)'. Materials Letters, 62 (17-18). pp. 3266 - 3268. ISSN: 0167-577X