Skip to Content
Skip to main content
e

Dr Seyedmehdi Hosseini
Research Fellow II

Cai, Q., Zhou, M., Bagherpour, E., Hosseini, S., Mendis, C., Chang, I. and et al. (2023) 'New Insight Into Crack-Healing Mechanism via Electropulsing Treatment'. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 54 (7). pp. 2960 - 2974. ISSN: 1073-5623 Open Access Link

Journal article

Hosseini, SM., Novák, P. and Veselý, M. (2020) 'Positive temperature dependence of compressive properties in an AlNiCo poly-quasicrystal fabricated by mechanical alloying and spark plasma sintering'. Scripta Materialia, 187. pp. 169 - 174. ISSN: 1359-6462

Journal article

Talluri, VSSLP., Tleuova, A., Hosseini, S. and Vopicka, O. (2020) 'Selective separation of 1-butanol from aqueous solution through pervaporation using PTSMP-silica nano hybrid membrane'. Membranes, 10 (4). pp. 55 - 55. ISSN: 2077-0375

Journal article

Hosseini, S. and Novák, P. (2019) 'On the formation of AlNiCo nano-quasicrystalline phase during mechanical alloying through electroless Ni-P plating of starting particles'. Materials, 12 (14). pp. 2294 - 2294. ISSN: 1996-1944

Journal article

Hosseini, SM., Habibolahzadeh, A. and Němeček, J. (2019) 'Static and dynamic responses of a novel Al nanocomposite foam/sandwich structure under bending, impact and quasi-static compression tests'. Journal of Sandwich Structures and Materials, 21 (4). pp. 1406 - 1427. ISSN: 1099-6362

Journal article

Hosseini, SM., Habibolahzadeh, A., Králík, V., Petráňová, V. and Němeček, J. (2017) 'Nano-SiCp effects on the production, microstructural evolution and compressive properties of highly porous Al/CaCO3 foam fabricated via continual annealing and roll-bonding process'. Materials Science and Engineering: A, 680. pp. 157 - 167. ISSN: 0921-5093

Journal article

Hosseini, SM., Habibolahzadeh, A., Králík, V. and Němeček, J. (2016) 'Significant improvement in structural features, mechanical and physical properties of a novel CAR processed Al foam by nano-SiCp addition'. Materials Science and Engineering: A, 670. pp. 342 - 350. ISSN: 0921-5093

Journal article

Hosseini, SM., Habibolahzadeh, A., Petráňová, V. and Němeček, J. (2016) 'Influence of nano-SiCp on the foamability and microstructure of Al/TiH2 foam sheet manufactured by continual annealing and roll-bonding process'. Materials and Design, 97. pp. 483 - 491. ISSN: 0264-1275

Journal article

Hosseini, SM. and Habibolahzadeh, A. (2015) 'Investigation of nano-SiCp effect on microstructure and mechanical properties of Al/TiH2 foam precursor produced via ARB process'. Materials Science and Engineering: A, 639. pp. 80 - 88. ISSN: 0921-5093

Journal article

Hassani, A., Habibolahzadeh, A., Javadi, AH. and Hosseini, SM. (2013) 'Effect of strain rate on stress corrosion cracking of 316L austenitic stainless steel in boiling MgCl2 environment'. Journal of Materials Engineering and Performance, 22 (6). pp. 1783 - 1789. ISSN: 1059-9495

Journal article

Alishahi, M., Hosseini, SM., Monirvaghefi, SM. and Saatchi, A. (2013) 'Synthesis and passivation behavior of electroless Ni-P-CNT composite coating'. Materials and Corrosion, 64 (3). pp. 212 - 217. ISSN: 0947-5117

Journal article

Hosseini, SM., Alishahi, M., Najafizadeh, A. and Kermanpur, A. (2012) 'The improvement of ductility in nano/ultrafine grained low carbon steels via high temperature short time annealing'. Materials Letters, 74. pp. 206 - 208. ISSN: 0167-577X

Journal article

Hosseini, SM., Kermanpur, A., Najafizadeh, A. and Alishahi, M. (2012) 'Effect of process parameters on microstructures and mechanical properties of a nano/ultrafine grained low carbon steel produced by martensite treatment using plane strain compression'. ISIJ International, 52 (3). pp. 464 - 470. ISSN: 0915-1559

Journal article

Alishahi, M., Monirvaghefi, SM., Saatchi, A. and Hosseini, SM. (2012) 'The effect of carbon nanotubes on the corrosion and tribological behavior of electroless Ni-P-CNT composite coating'. Applied Surface Science, 258 (7). pp. 2439 - 2446. ISSN: 0169-4332

Journal article

Hosseini, SM., Najafizadeh, A. and Kermanpur, A. (2011) 'Producing the nano/ultrafine grained low carbon steel by martensite process using plane strain compression'. Journal of Materials Processing Technology, 211 (2). pp. 230 - 236. ISSN: 0924-0136

Journal article

Brunel University London
Kingston Lane
Uxbridge
Middlesex UB8 3PH

Tel: +44 (0)1895 274000

Fax: +44 (0)1895 232806

Security: +44 (0)1895 255786

Directions to the campus

Brunel.ac.uk uses cookies to make our site better for you. By clicking on or navigating this site, you accept our use of cookies in accordance with our cookie policy.

Close this message