Ayodeji, A., El Masri, E., Williamson, T., Asgar Abbas, MA. and Gan, T-H. (2024) 'State-enhanced attention network for optimisation of energy and yield in gas atomised metal powder production'. Sustainable Chemistry and Pharmacy, 43. pp. 1 - 15. ISSN: 2352-5541 Open Access Link

Salimi, M., Teyeb, A., El Masri, E., Hoque, S., Carr, P., Balachandran, W. and Gan, T-H. et al. (2024) 'Experimental and Numerical Investigation of the Use of Ultrasonic Waves to Assist Laser Welding'. Materials, 17 (11). pp. 1 - 15. ISSN: 1996-1944 Open Access Link

Dimopoulos, A., Chryssinas, G., Mavroforaki, D., Gan, T-H. and Chatzakos, P. (2024) 'An Interactive Web-Based Platform for Support Generation and Optimisation for Metal Laser Powder Bed Fusion'. Materials, 17 (7). pp. 1 - 14. ISSN: 1996-1944 Open Access Link

Cosoli, G., Salerno, G., Calcagni, MT., Pandarese, G., Violini, L., El Masri, E., De Melo Ribeiro, H., Abbas, MAA. and Revel, GM. et al. (2024) 'How to Valorize Construction and Demolition Wastes? Beyond the State of the art Through Vision Systems and Artificial Intelligence Tools'.2024 IEEE International Workshop on Metrology for Living Environment (MetroLivEnv). IEEE. pp. 552 - 557.

Dimopoulos, A., Salimi, M., Gan, T-H. and Chatzakos, P. (2023) 'Support Structures Optimisation for High-Quality Metal Additive Manufacturing with Laser Powder Bed Fusion: A Numerical Simulation Study'. Materials, 16 (22). pp. 1 - 27. ISSN: 1996-1944 Open Access Link

Berchiolli, M., Wolfram, S., Balachandran, W. and Gan, T-H. (2023) 'Fully Automatic Thoracic Cavity Segmentation in Dynamic Contrast Enhanced Breast MRI Using Deep Convolutional Neural Networks'. Applied Sciences (Switzerland), 13 (18). pp. 1 - 16.Open Access Link

Seoane-Viaño, I., Xu, X., Ong, JJ., Teyeb, A., Gaisford, S., Campos-Álvarez, A., Stulz, A., Marcuta, C., Kraschew, L., Mohr, W., Basit, AW. and Goyanes, A. et al. (2023) 'A case study on decentralized manufacturing of 3D printed medicines'. International Journal of Pharmaceutics: X, 5. pp. 1 - 9. ISSN: 2590-1567 Open Access Link

Donati, E., Chousidis, C., Ribeiro, HDM. and Russo, N. (2023) 'Classification of Speaking and Singing Voices Using Bioimpedance Measurements and Deep Learning'. Journal of Voice. pp. S0892-1997(23)00120-0. ISSN: 0892-1997

Ramagiri, S., Zonuzi, A., Lowe, S., El Masri, E., Teyeb, A. and Gan, T-H. (2023) 'Machine Learning and Optimisation to Improve Energy Utilisation'. ENERGY 2023.

Salimi, M., Livadas, M., Teyeb, A., El Masri, E. and Gan, TH. (2023) 'Biofouling Removal Using a Novel Electronic System for Driving an Array of High Power Marinised Transducers'. Applied Sciences (Switzerland), 13 (6). pp. 1 - 16.Open Access Link

Ramagiri, S., Zonuzi, A., Kanfoud, J., Lowe, S., El Masri, E., Marshall, M., Teyeb, A. and Gan, T-H. et al. (2023) 'Optimisation frame work based on machine learning model to improve energy utilisation'. International Conference on Innovations in Energy Engineering & Cleaner Production IEECP23.

Dimopoulos, A., Zournatzis, I., Gan, T-H. and Chatzakos, P. (2023) 'Multi-Response Optimization of Ti6Al4V Support Structures for Laser Powder Bed Fusion Systems'. Journal of Manufacturing and Materials Processing, 7 (1). pp. 1 - 16.Open Access Link

Amini, A. and Gan, TH. (2023) 'A Computer Vision-Based Quality Assessment Technique for R2R Printed Silver Conductors on Flexible Plastic Substrates'. Applied Sciences (Switzerland), 13 (2). pp. 1 - 8.Open Access Link

Teyeb, A., Salimi, M., El Masri, E., Balachandran, W. and Gan, TH. (2023) 'Analytical simulation of the microbubble collapsing in a welding fusion pool'. Materials, 16 (1). pp. 1 - 10. ISSN: 1996-1944 Open Access Link

Subramaniam, S., Kanfoud, J. and Gan, TH. (2022) 'Zero-Defect Manufacturing and Automated Defect Detection Using Time of Flight Diffraction (TOFD) Images'. Machines, 10 (10). pp. 1 - 16.Open Access Link

Amini, A. and Gan, TH. (2022) 'A Machine Learning Based Model for Monitoring of Composites' Drilling-Induced Defects During Assembly Production Using Terahertz Imaging Data'.2022 IEEE Workshop on Complexity in Engineering (COMPENG). Florence, Italy. 18 - 20 July. IEEE. pp. 1 - 5. ISSN: 2688-2566 Open Access Link

Teyeb, A., Silva, J., Kanfoud, J., Carr, P., Gan, T. and Balachandran, W. (2022) 'Improvements in the Microstructure and Mechanical Properties of Aluminium Alloys Using Ultrasonic-Assisted Laser Welding'. Metals, 12 (6). pp. 1 - 15.Open Access Link

De Melo Ribeiro, H., Arnold, A., Howard, JP., Shun-Shin, MJ., Zhang, Y., Francis, DP., Lim, PB., Whinnett, Z. and Zolgharni, M. et al. (2022) 'ECG-based real-time arrhythmia monitoring using quantized deep neural networks: A feasibility study'. Computers in Biology and Medicine, 143. pp. 105249 - 105249. ISSN: 0010-4825

Amini, A., Kanfoud, J. and Gan, TH. (2022) 'An Artificial Intelligence Neural Network Predictive Model for Anomaly Detection and Monitoring of Wind Turbines Using SCADA Data'. Applied Artificial Intelligence, 36 (1). pp. 1 - 14. ISSN: 0883-9514 Open Access Link

Gan, T-H., Forouzanmehr, M., Kashyzadeh, KR., Borjali, A., Ivanov, A., Jafarnode, M., Wang, B. and Chizari, M. et al. (2022) 'Detection and Analysis of Corrosion and Contact Resistance Faults of TiN and CrN Coatings on 410 Stainless Steel as Bipolar Plates in PEM Fuel Cells'. Sensors, 22 (3). pp. 1 - 18. ISSN: 1424-8220 Open Access Link

Mohd Fairuz, S. and Tat-Hean, G. (2022) 'Detection of Vibration Induced Fatigue Crack Propagation Using a Hybrid Method'. Trans Tech Publications, Ltd.. pp. 473 - 478. ISSN: 1013-9826

Amini, A., Kanfoud, J. and Gan, TH. (2021) 'An Artificial-Intelligence-Driven Predictive Model for Surface Defect Detections in Medical MEMS'. Sensors, 21 (18). pp. 1 - 10. ISSN: 1424-8220 Open Access Link

Angulo, Á., Mares, C. and Gan, T-H. (2021) 'Diagnostic feature extraction and filtering criterion for fatigue crack growth using high frequency parametrical analysis'. Sensors, 21 (15). pp. 1 - 20. ISSN: 1424-8220 Open Access Link

Quatrini, E., Costantino, F., Mba, D., Li, X. and Gan, T-H. (2021) 'Monitoring a reverse osmosis process with kernel principal component analysis: A preliminary approach'. Applied Sciences (Switzerland), 11 (14). pp. 1 - 18.Open Access Link

Ho, SK., Nedunuri, HC., Balachandran, W., Kanfoud, J. and Gan, TH. (2021) 'Monitoring of industrial machine using a novel blind feature extraction approach'. Applied Sciences (Switzerland), 11 (13). pp. 1 - 11.Open Access Link

Cano-Garcia, H., Kshirsagar, R., Pricci, R., Teyeb, A., O’brien, F., Saha, S., Kosmas, P. and Kallos, E. et al. (2021) 'Enhancing the accuracy of non-invasive glucose sensing in aqueous solutions using combined millimeter wave and near infrared transmission'. Sensors, 21 (9). pp. 1 - 11. ISSN: 1424-8220 Open Access Link

Dhutti, A., Dhutti, A., Malo, S., Marques, H., Balachandran, W. and Gan, T. (2021) 'Numerical modelling of ultrasonic guided wave propagation and defect detection in offshore steel sheet piles'. Applied Sciences (Switzerland), 11 (9). pp. 1 - 19.Open Access Link

Gan, TH., Kanfoud, J., Nedunuri, H., Amini, A. and Feng, G. (2021) 'Industry 4.0: Why Machine Learning Matters?'.2nd World Congress on Condition Monitoring (WCCM 2019). Singapore. 3 - 5 December. Springer Singapore. pp. 397 - 404. ISSN: 2195-4356 Open Access Link

Amini, A. (2020) 'On the Possibility of Using Virtual Reality to Improve the Mobility of People with Parkinson's Disease', in Hayre, CM., Muller, DJ. and Scherer, MJ. (eds.) Virtual Reality in Health and Rehabilitation. Boca Raton : CRC Press. ISBN 10: 0-429-35136-4. ISBN 13: 978-0-367-36771-8.

Ho, SK., Nedunuri, HC., Balachandran, W. and Gan, TH. (2020) 'Bolt looseness detection using Spectral Kurtosis analysis for structural health monitoring'.ISMA 2020 including USD 2020. Leuven, Belgium. 7 - 9 September. KATHOLIEKE UNIV LEUVEN, DEPT WERKTUIGKUNDE. pp. 1215 - 1221.Open Access Link

Masri, EE. and Gan, T-H. (2020) 'Wave Propagation and Scattering due to Debonding in CFRP Strengthened Reinforced Concrete Beams'. Recent Progress in Materials, 2 (3). pp. 1 - 20.

Pedram, SK., Gan, TH. and Ghafourian, M. (2020) 'Improved defect detection of guided wave testing using split-spectrum processing'. Sensors (Switzerland), 20 (17). pp. 1 - 18. ISSN: 1424-8220 Open Access Link

Lowe, PS., Lais, H., Paruchuri, V. and Gan, TH. (2020) 'Application of ultrasonic guided waves for inspection of high density polyethylene pipe systems'. Sensors (Switzerland), 20 (11). pp. 1 - 15. ISSN: 1424-8220 Open Access Link

Kshirsagar, R., Jones, S., Lawrence, J. and Tabor, J. (2020) 'Optimization of TIG welding parameters using a hybrid nelder mead-evolutionary algorithms method'. Journal of Manufacturing and Materials Processing, 4 (1). pp. 10 - 10.Open Access Link

Dhutti, A., Tumin, SA., Balachandran, W., Kanfoud, J. and Gan, T-H. (2019) 'Development of Ultrasonic Guided Wave Transducer for Monitoring of High Temperature Pipelines'. Sensors (Basel, Switzerland), 19 (24). pp. 1 - 16. ISSN: 1424-8220 Open Access Link

El Masri, E., Ferguson, N. and Waters, T. (2019) 'Wave propagation and scattering in reinforced concrete beams'. The Journal of the Acoustical Society of America, 146 (5). pp. 3283 - 3294. ISSN: 0001-4966 Open Access Link

Amini, A., Kanfound, J. and Gan, T-H. (2019) 'An AI Driven Real-time 3-D Representation of an Off-shore WT for Fault Diagnosis and Monitoring'.ICAAI 2019: 2019 The 3rd International Conference on Advances in Artificial Intelligence. Istanbul, Turkey. 26 - 28 October. ACM. pp. 162 - 165.Open Access Link

Lais, H., Lowe, PS., Wrobel, LC. and Gan, T-H. (2019) 'Ultrasonic Transducer Array Performance for Improved Cleaning of Pipelines in Marine and Freshwater Applications'. Applied Sciences, 9 (20). pp. 1 - 19.Open Access Link

Lais, H., Lowe, PS., Wrobel, LC. and Gan, T-H. (2019) 'Investigation of Ultrasonic Sonotrode Design to Improve the Performance of Ultrasonic Fouling Removal'. IEEE Access, 7. pp. 148897 - 148912. ISSN: 2169-3536 Open Access Link

Qian, P., Tian, X., Kanfoud, J., Lee, JLY. and Gan, TH. (2019) 'A novel condition monitoring method of wind turbines based on long short-term memory neural network'. Energies, 12 (18). pp. 1 - 15.Open Access Link

El Masri, E. (2019) 'Foresight Review: Application of Non-metallics in the Oil and Gas Industry'. Available at: https://www.non-metallic.com/foresight-review.Open Access Link

Shan, K., Szabo, I., Chong, A., Kanfoud, J. and Gan, T-H. (2019) 'Robotic Digital X-ray Scanning System for Deep Water Flexible Riser Inspection'.International Conference on Manufacturing Research, Incorporating the 34th National Conference on Manufacturing Research. Belfast, UK. 22 - 12 September. Advances in Manufacturing Technology XXXIII : Proceedings of the 17th International Conference on Manufacturing Research, incorporating the 34th National Conference on Manufacturing Research. pp. 135 - 140. ISSN: 2352-751X Open Access Link

Berchiolli, M., Guarda, G., Walsh, G. and Pesyridis, A. (2019) 'Turbocharger axial turbines for high transient response, Part 2: Genetic algorithm development for axial turbine optimisation'. Applied Sciences (Switzerland), 9 (13). pp. 2679 - 2679. ISSN: 2076-3417 Open Access Link

Kumar, H., Lambert, JW., Nageswaran, C., Nadendla, HB. and Gan, TH. (2019) 'Towards a viable field deployable ultrasonic technique for detection of type IV creep damage in CSEF steels at an early stage'.ASME 2019 Pressure Vessels & Piping Conference. San Antonio, TX. USA. 14 - 19 July. American Society of Mechanical Engineers. ISSN: 0277-027X

Kshirsagar, R., Jones, S., Lawrence, J. and Tabor, J. (2019) 'Measurement of ferrite content of stainless steel sheet welds using a new Ferrite Density Number scale'. Journal of Materials Processing Technology, 274. pp. 116278 - 116278. ISSN: 0924-0136

Angulo, Á., Tang, J., Khadimallah, A., Soua, S., Mares, C. and Gan, TH. (2019) 'Acoustic emission monitoring of fatigue crack growth in mooring chains'. Applied Sciences (Switzerland), 9 (11). pp. 2187 - 2187. ISSN: 2076-3417 Open Access Link

Duan, W. and Gan, T-H. (2019) 'Investigation of guided wave properties of anisotropic composite laminates using a semi-analytical finite element method'. Composites Part B: Engineering, 173. pp. 106898 - 106898. ISSN: 1359-8368 Open Access Link

Kshirsagar, R., Jones, S., Lawrence, J. and Tabor, J. (2019) 'Prediction of bead geometry using a two-stage SVM–ANN algorithm for automated tungsten inert gas (TIG) welds'. Journal of Manufacturing and Materials Processing, 3 (2). pp. 39 - 39.Open Access Link

Zheng, H., Ertel, JP., Kourmpetis, M., Kanfoud, J., Niederleithinger, E. and Gan, TH. (2019) 'Integrity Testing of Cast In Situ Concrete Piles Based on an Impulse Response Function Method Using Sine-Sweep Excitation by a Shaker'. Journal of Nondestructive Evaluation, 38 (55). pp. 1 - 18. ISSN: 0195-9298 Open Access Link

Zennaro, M., O'Boy, DJ., Lowe, PS. and Gan, T-H. (2019) 'Characterization and Design Improvement of a Thickness-Shear Lead Zirconate Titanate Transducer for Low Frequency Ultrasonic Guided Wave Applications.'. Sensors (Basel, Switzerland), 19 (8). pp. 1848 - 1848. ISSN: 1424-8220 Open Access Link