Bulkai, A., Baranyai, Z., Halmi, G., Their, F., Ignatev, M., Scharff, W., Szabo, I., Logeswaran, G., Kappatos, V., Selcuk, C. and Gan, TH. et al. (2014) 'Enable the powder metallurgy process to expand to new markets with more reliable parts and lower manufacturing costs through the inspection of green parts'. Euro PM 2014 Congress and Exhibition, Proceedings.

Prisutova, J., Horoshenkov, K., Duan, W. and Kirby, R. (2014) 'An acoustic method of blockage characterisation in a pipe based on the cross-sectional mode analysis'. 21st International Congress on Sound and Vibration 2014, ICSV 2014. pp. 3296 - 3301.

Catterson, VM. and Sheng, B. (2014) 'Deep neural networks for understanding and diagnosing partial discharge data'.2015 IEEE Electrical Insulation Conference. IEEE. pp. 218 - 221.

Sheng, B., Zhou, C., Hepburn, DM., Dong, X., Zhou, W. and Yu, J. (2014) 'Investigation of partial discharge propagation in cross-bonded HV cable systems'.2014 IEEE Electrical Insulation Conference (EIC). IEEE. pp. 19 - 23.

Dong, X., Yuan, Y., Gao, Z., Zhou, C., Wallace, P., Alkali, B., Sheng, B. and Zhou, H. et al. (2014) 'Analysis of cable failure modes and cable joint failure detection via sheath circulating current'.2014 IEEE Electrical Insulation Conference (EIC). IEEE. pp. 294 - 298.

Sheng, B., Zhou, C., Hepburn, DM., Dong, X., Peers, G., Zhou, W. and Tang, Z. et al. (2014) 'Partial discharge pulse propagation in power cable and partial discharge monitoring system'. IEEE Transactions on Dielectrics and Electrical Insulation, 21 (3). pp. 948 - 956. ISSN: 1070-9878

Tang, Z., Zhou, C., Jiang, W., Zhou, W., Jing, X., Yu, J., Alkali, B. and Sheng, B. et al. (2014) 'Analysis of significant factors on cable failure using the cox proportional hazard model'. IEEE Transactions on Power Delivery, 29 (2). pp. 951 - 957. ISSN: 0885-8977

Zhu, S., Zhou, W., Deng, Y., Sheng, B., Yang, S. and Yu, J. (2013) 'Lightning current monitoring system for recording multiple lightning strikes'. Gaodianya Jishu/High Voltage Engineering, 39 (11). pp. 2699 - 2705. ISSN: 1003-6520

Sheng, B., Zhou, C., Dong, X., Hepburn, DM., Alkali, B. and Zhou, W. (2013) 'PD detection and localisation in cross-bonded HV cable systems'.22nd International Conference and Exhibition on Electricity Distribution (CIRED 2013). Institution of Engineering and Technology. pp. 0129 - 0129.

Duan, W., Kirby, R., Prisutova, J. and Horoshenkov, KV. (2013) 'Measurement of complex acoustic intensity in an acoustic waveguide'. JOURNAL OF THE ACOUSTICAL SOCIETY OF AMERICA, 134 (5). pp. 3674 - 3685. ISSN: 0001-4966 Open Access Link

Tsampas, P., Roditis, G., Papadimitriou, V., Chatzakos, P. and Gan, TH. (2013) 'Optimized energy harvesting from mechanical vibrations through piezoelectric actuators, based on a synchronized switching technique'.SPIE Microtechnologies. Grenoble, FRANCE. 12 - 26 April. SPIE. pp. 87631G - 87631G. ISSN: 0277-786X

Soua, S., Gan, T-H., Bridge, B., Van Lieshout, P. and Perera, A. (2013) 'Determination of the combined vibrational and acoustic emission signature of a wind turbine gearbox and generator shaft in service as a pre-requisite for effective condition monitoring'. Renewable Energy, 51. pp. 175 - 181. ISSN: 0960-1481 Open Access Link

Mohimi, A., Richardson, P., Catton, P., Gan, TH., Balachandran, W. and Selcuk, C. (2013) 'High temperature dielectric, elastic and piezoelectric coefficients of shear type lithium niobate crystals'. Key Engineering Materials, 543. pp. 117 - 120. ISSN: 1013-9826

Ponomarev, MG., Kappatos, V., Selcuk, C., Gan, T-H., Amos, M., Halai, H., Gierl, C. and Iovea, M. et al. (2013) 'Digital radiographic inspection technique for production friendly quality assessment of PM parts'. Powder Metallurgy, 56 (2). pp. 92 - 95. ISSN: 0032-5899

Avdelidis, NP. and Gan, TH. (2013) 'Non-destructive evaluation (NDE) of Composites: Infrared (IR) thermography of wind turbine blades', inNon-Destructive Evaluation (NDE) of Polymer Matrix Composites: Techniques and Applications. Elsevier. pp. 634 - 648. ISBN 13: 9780857093448.

Chacon, JLF., Andicoberry, EA., Gan, TH., Asfis, G. and Balachandran, W. (2013) 'A comparative study on the use of acoustic emission and vibration analysis for angular misalignment detection using envelope analysis'. 10th International Conference on Condition Monitoring and Machinery Failure Prevention Technologies 2013, CM 2013 and MFPT 2013. pp. 598 - 610.

Dimlaye, V., Mudge, P. and Gan, TH. (2013) 'An unsupervised learning for damage detection using ultrasonic guided waves in GFRP material for tidal application'. 10th International Conference on Condition Monitoring and Machinery Failure Prevention Technologies 2013, CM 2013 and MFPT 2013. pp. 623 - 632.

Iovea, M., Neagu, M., Stefanescu, B., Mateiasi, G., Clarke, AL., Nicholson, PI., Ponomarev, M., Kappatos, V., Selcuk, C. and Gan, TH. et al. (2013) 'PM parts fast in-line x-ray digital radiography'. International Powder Metallurgy Congress and Exhibition, Euro PM 2013.

Ponomarev, MG., Selcuk, C., Gan, TH., Amos, M., Nicholson, I., Iovea, M., Neagu, M., Stefanescu, B. and Mateiasi, G. et al. (2013) 'A defect detection and classification system for automatic analysis of digital radiography images of powder metallurgy parts'. International Powder Metallurgy Congress and Exhibition, Euro PM 2013.

Rafael, S., Soua, S., Zhao, L., Gan, TH., Makris, NA. and Kavatzikidis, T. (2013) 'Guided waves focusing techniques for accurate defect detection in Plate Structures'. 12th International Conference of the Slovenian Society for Non-Destructive Testing: Application of Contemporary Non-Destructive Testing in Engineering, ICNDT 2013 - Conference Proceedings. pp. 649 - 656.

Budimir, M., Mohimi, A., Moustakidis, S. and Gan, TH. (2013) 'High temperature transducers system for long range ultrasound non-destructive evaluation in aging power plants'. 12th International Conference of the Slovenian Society for Non-Destructive Testing: Application of Contemporary Non-Destructive Testing in Engineering, ICNDT 2013 - Conference Proceedings. pp. 121 - 125.

Moustakidis, S., Kappatos, V., Karlsson, P., Selcuk, C., Hrissagis, K. and Gan, TH. (2012) 'An automated long range ultrasonic rail flaw detection system based on the support vector machine algorithm'. WIT Transactions on the Built Environment, 127. pp. 199 - 210. ISSN: 1743-3509

Kirby, R., Prisutova, J., Duan, W. and Horoshenkov, K. (2012) 'Complex intensity in circular ducts containing an obstruction'. The Journal of the Acoustical Society of America, 132 (3_Supplement). pp. 1994 - 1994. ISSN: 0001-4966

Duan, W. and Kirby, R. (2012) 'A hybrid finite element approach to modeling sound radiation from circular and rectangular ducts'. Journal of the Acoustical Society of America, 131 (5). pp. 3638 - 3649. ISSN: 0001-4966 Open Access Link

De Carellan, IG., Catton, P., Selcuk, C. and Gan, TH. (2012) 'Methods for detection and cleaning of fouling in pipelines'.5th International Conference on Emerging Technologies in Non-Destructive Testing (NDT). Ioannina, GREECE. 1 - 21 September. CRC Press. pp. 231 - 236.

Soua, S., Bridge, B., Cebulski, L. and Gan, TH. (2012) 'Statistical analysis of accelerometer data in the online monitoring of a power slip ring in a wind turbine'. Measurement Science and Technology, 23 (3). pp. 035006 - 035006. ISSN: 0957-0233

Ponomarev, MG., Selcuk, C. and Gan, T-H. (2012) 'Construction of pattern recognition system optimized for X-ray inspection of plastic electronics and OLED displays'. 51st Annual Conference of the British Institute of Non-Destructive Testing 2012, NDT 2012. pp. 354 - 360.

Ponomarev, MG., Kappatos, V., Selcuk, C., Gan, TH., Amos, M., Halai, H., Gierl, C. and Lovea, M. et al. (2012) 'Development of a digital radiographic inspection technique for production friendly quality assessment of powder metallurgy parts'. Proceedings of the International Euro Powder Metallurgy Congress and Exhibition, Euro PM 2012.

Iovea, M., Neagu, M., Mateiasi, G., Halai, HV., Amos, M., Ponomarev, M., Kappatos, V., Selcuk, C., Gan, TH., Gierl, C. and Momeni, M. et al. (2012) 'Preliminary NDT investigation of sintered Powder Metallurgy parts by high-resolution TDI based X-ray digital radiography'. Proceedings of the International Euro Powder Metallurgy Congress and Exhibition, Euro PM 2012.

Soua, S. and Gan, TH. (2012) 'Development of in-service Condition Monitoring system using combined vibrational and Acoustic Emission signature for wind turbine gearbox and generator shaft'. 9th International Conference on Condition Monitoring and Machinery Failure Prevention Technologies 2012, CM 2012 and MFPT 2012. pp. 186 - 202.

Qu, Z., Bennecer, A., Selcuk, C. and Gan, TH. (2012) 'Development of a laser-based weld flaw identification system'. 51st Annual Conference of the British Institute of Non-Destructive Testing 2012, NDT 2012. pp. 21 - 29.

Gan, TH. and Edwards, G. (2012) 'Advancement of NDT technologies through the European FP7 research for the benefit of SMEs funding scheme'. 51st Annual Conference of the British Institute of Non-Destructive Testing 2012, NDT 2012. pp. 100 - 110.

Mohimi, A., Gan, TH., Balachandran, W., Selcuk, C. and Edwards, G. (2012) 'Guided wave transducers for inspection of high temperature superheated steam pipes'. 51st Annual Conference of the British Institute of Non-Destructive Testing 2012, NDT 2012. pp. 272 - 278.

de Carellan, IG., Catton, P., Gan, TH., Selcuk, C. and Haig, A. (2012) 'Laser vibrometry to identify resonances of coated substrates'. 51st Annual Conference of the British Institute of Non-Destructive Testing 2012, NDT 2012. pp. 383 - 390.

Duan, W. and Kirby, R. (2011) 'Complex acoustic intensity in a duct containing an axisymmetric obstruction'. 18th International Congress on Sound and Vibration 2011, ICSV 2011. pp. 2232 - 2239.

Kappatos, V., Selcuk, C., Gan, TH. and Gharaibeh, Y. (2011) 'Decreasing the influence of dispersive wave modes in long-range ultrasonic rail testing using wavelets'. IET Conference Publications, 2011 (581 CP). pp. 8B2 - 8B2.

Horoshenkov, KV., Prisutova, J., Kirby, R. and Duan, W. (2011) 'On the variation of the acoustic intensity vector near an open end of a pipe'. Proceedings of Forum Acusticum. pp. 1007 - 1011. ISSN: 2221-3767

Hills, AF., Lang, ZQ., Soua, S., Gan, TH., Perera, A., Van Lieshout, P. and Grainger, B. et al. (2011) 'A novel baseline model-based technique for condition monitoring of wind turbine components'. Insight: Non-Destructive Testing and Condition Monitoring, 53 (8). pp. 434 - 438. ISSN: 1354-2575

Avdelidis, NP., Gan, TH., Ibarra-Castanedo, C. and Maldague, XPV. (2011) 'Infrared thermography as a non-destructive tool for materials characterisation and assessment'.SPIE Defense, Security, and Sensing. Orlando, FL. 6 - 28 April. SPIE. pp. 801313 - 801313. ISSN: 0277-786X

Soua, S., Cebulski, L., Gan, TH. and Bridge, B. (2011) 'Online monitoring of a power slip-ring on the shaft of a wind power generator'. Insight: Non-Destructive Testing and Condition Monitoring, 53 (6). pp. 321 - 329. ISSN: 1354-2575

Hills, AF., Lang, ZQ., Soua, S., Perera, A., Van Lieshout, P., Grainger, B. and Gan, TH. et al. (2011) 'A novel baseline model based technique for condition monitoring of wind turbine components'.8th International Conference on Condition Monitoring and Machinery Failure Prevention Technologies. Cardiff, UNITED KINGDOM. 1 - 22 June. BRITISH INST NON DESTRUCTIVE TESTING. pp. 71 - 83.

Avdelidis, NP. and Gan, TH. (2011) 'Transient thermography as a non-invasive NDT approach for composites assessment'. 50th Annual Conference of the British Institute of Non-Destructive Testing 2011, NDT 2011 Held in conjunction with the Materials Testing Exhibition, MT 2011. pp. 16 - 21.

Bennecer, A., Selcuk, C. and Gan, TH. (2011) 'Ultrasonic probe tracking for high reliability manual ultrasonic non-destructive testing'. 50th Annual Conference of the British Institute of Non-Destructive Testing 2011, NDT 2011 Held in conjunction with the Materials Testing Exhibition, MT 2011. pp. 273.

Sheng, B. and Zhou, W. (2010) 'Ultra-low power wireless-online-monitoring platform for transmission line in smart grid'.2010 International Conference on High Voltage Engineering and Application (ICHVE). IEEE. pp. 244 - 247.

Dupère, IDJ. and Duan, W. (2010) 'Reflection and transmission across partial blockages in fluidfilled flexible, non thin-walled pipes'. 24th National Conference on Noise Control Engineering 2010, Noise-Con 10, Held Jointly with the 159th Meeting of the Acoustical Society of America. pp. 1969 - 1981.

Chatzakos, P., Papadmitriou, V., Psarros, D., Nicholson, I. and Gan, TH. (2010) 'On the development of an unmanned underwater robotic crawler for operation on subsea flexible risers'.2010 IEEE Conference on Robotics, Automation and Mechatronics (RAM). IEEE. pp. 419 - 424.

Chatzakos, P., Avdelidis, N., Hrissagis, K. and Gan, TH. (2010) 'Autonomous Infrared (IR) thermography based inspection of Glass Reinforced Plastic (GRP) Wind Turbine Blades (WTBs)'.2010 IEEE Conference on Robotics, Automation and Mechatronics (RAM). IEEE. pp. 557 - 562.

Li, H., Zhou, W., Zhou, S., Yu, J., Zhang, S., Sheng, B. and Yu, Y. et al. (2010) 'Remote online monitoring system of power system lightning current'. Dianli Zidonghua Shebei/Electric Power Automation Equipment, 30 (8). ISSN: 1006-6047

Gan, TH., Jackson, P. and France, A. (2009) 'Evolution of a guided wave system for pipeline inspection'. Welding and Cutting, 8 (5). pp. 286 - 291. ISSN: 1612-3433

Gan, T-H., Jackson, P., France, A. and Daniel, I. (2009) 'Development of a permanent installation tool for structural health monitoring of pipelines'.Malaysia International NDT Conference and Exhibition. Kuala Lumpur, Malaysia. [unpublished]

Gan, T-H., Ennaceur, C. and Jackson, P. (2009) 'Time reversal focusing of guided waves in pipes and pipelines'.Malaysia International NDT Conference and Exhibition. Kuala Lumpur, Malaysia. [unpublished]