Wang, Y., Wang, Z., Zou, L. and Dong, H. (2024) 'Observer-Based Fuzzy PID Tracking Control under Try-Once-Discard Communication Protocol: An Affine Fuzzy Model Approach'. IEEE Transactions on Fuzzy Systems, 32 (4). pp. 2352 - 2365. ISSN: 1063-6706

Moreno-Sánchez, PA., Banitsas, K., Van Gils, M. and Abbod, M. (2024) 'Addressing Rapidly Aging Society Challenges Through Health 4.0'.Mediterranean Conference on Medical and Biological Engineering and Computing International Conference on Medical and Biological Engineering. Sarajevo, Bosnia and Herzegovina. 4 - 16 September. Springer Nature Switzerland. pp. 764 - 772. ISSN: 1680-0737 Open Access Link

Pei, E. and Kabir, I. (2024) 'Development of FGM and FGAM', inSpringer Tracts in Additive Manufacturing. Springer International Publishing. , Part F3252. pp. 307 - 319. ISBN 13: 9783031058622.

Guo, J., Wang, Z., Zou, L., Dong, H. and Han, QL. (2024) 'Accumulative-Event-Based Proportional-Integral Observer Design for Partially State-Saturated Systems Under Probabilistic Quantizations'. IEEE Transactions on Systems, Man, and Cybernetics: Systems. pp. 1 - 12. ISSN: 2168-2216

He, Y., Xiao, L., Wang, Z., Zuo, Q. and Li, L. (2024) 'A Fuzzy Neural Network Approach to Adaptive Robust Nonsingular Sliding Mode Control for Predefined-Time Tracking of a Quadrotor'. IEEE Transactions on Fuzzy Systems, 32 (12). pp. 6775 - 6788. ISSN: 1063-6706

Wang, L., Wang, Z., Liu, S. and Peng, D. (2024) 'Unscented Kalman Filtering Over Full-Duplex Relay Networks Under Binary Encoding Schemes'. IEEE Transactions on Automatic Control. pp. 1 - 8. ISSN: 0018-9286

Zou, L., Wang, Z., Shen, B. and Dong, H. (2024) 'Secure Recursive State Estimation of Networked Systems Against Eavesdropping: A Partial-Encryption-Decryption Method'. IEEE Transactions on Automatic Control. pp. 1 - 14. ISSN: 0018-9286

Qu, B., Wang, Z., Shen, B., Dong, H. and Peng, D. (2024) 'Adaptive Decentralized State Estimation for Multimachine Power Grids Under Measurement Noises With Unknown Statistics'. IEEE Transactions on Industrial Informatics. pp. 1 - 10. ISSN: 1551-3203

Pei, E. and Lakomiec, M. (2024) 'Standardisation efforts of ISO/TC 261 “Additive Manufacturing”. 24th Plenary Meeting of ISO/TC 261 “Additive Manufacturing”'. Progress in Additive Manufacturing. ISSN: 2363-9512

Gaballa, M., Abbod, M., Razouqi, Q. and Algharabally, M. (2024) 'Developed Deep Reinforcement Learning Model Based LSTM for Channel Approximation in PD-NOMA'.2024 International Conference on Electrical, Computer and Energy Technologies (ICECET). Sydney, Australia. 1 - 27 July. IEEE. pp. 1 - 6.

Almeida, H., Pei, E. and Vitorino, L. (2024) 'Sustainablity for 3D Printing', inSpringer Tracts in Additive Manufacturing. Springer International Publishing. , Part F3250. pp. 1 - 13. ISBN 13: 9783030752347.

Pei, E. and Kabir, I. (2024) 'Standardisation in AM', inSpringer Tracts in Additive Manufacturing. Springer International Publishing. , Part F3252. pp. 59 - 73. ISBN 13: 9783031058622.

Fernandez-Hart, T., Knight, JC. and Kalganova, T. (2024) 'Posit and floating-point based Izhikevich neuron: A Comparison of arithmetic.'. Neurocomputing, 597. pp. 127903 - 127903.

Benedict, ST., Regnier, A., Koenig, C. and Dehouche, Z. (2024) 'Whole-Building Calibrated Energy Performance Simulation towards Energy Sufficiency, Climate Resilience and Net Zero Carbon: Case Study of a Medium-Sized Hotel'. ASHRAE Transactions. pp. 484 - 492. ISSN: 0001-2505

Abualshawareb, A. and Dehouche, Z. (2024) 'Economic and Environmental Analysis of a Hybrid Energy Storage System for an Energy Community on the Island of Formentera'. Springer Nature Switzerland. pp. 401 - 416. ISSN: 1863-5520

Zhong, Z., Chen, T., He, B. and Zhao, H. (2024) 'Influence of Gas Medium and Pulse Parameters on Nanosecond Pulse Discharge Characteristics'. Ranshao Kexue Yu Jishu/Journal of Combustion Science and Technology, 30 (2). pp. 187 - 195. ISSN: 1006-8740

Sohaib, R., ONIRETI, O., Sambo, Y., Imran, M. and Swash, R. (2024) 'Energy Efficient Resource Allocation Framework Based on Dynamic Meta-Transfer Learning for V2X Communications'. IEEE Transactions on Network and Service Management, 21 (4). pp. 4343 - 4356. ISSN: 1932-4537

Zenhom, ZM., Abdel Aleem, SHE., Zobaa, AF. and Boghdady, TA. (2024) 'A comprehensive review of renewables and electric vehicles hosting capacity in active distribution networks'. IEEE Access, 12. pp. 3672 - 3699. Open Access Link

Hemeida, A., Bakry, O., Alkhalaf, S., Mikhaylov, A., Zobaa, AF., Senjyu, T., Mikhailef, S. and Dardeer, M. et al. (2024) 'Impact of loading capability on optimal location of renewable energy systems distribution networks'. Ain Shams Engineering Journal, 15 (1). pp. 102340 - 102340. ISSN: 2090-4479 Open Access Link

Mahdy, A., Hasanien, HM., Abdel Aleem, SHE., Al-Dhaifallah, M., Zobaa, AF. and Ali, ZM. (2024) 'State-of-the-art of the most commonly adopted wave energy conversion systems'. Ain Shams Engineering Journal, 15 (1). pp. 102322 - 102322. ISSN: 2090-4479 Open Access Link

Fang, J., Wang, Z., Liu, W., Chen, L. and Liu, X. (2023) 'A new particle-swarm-optimization-assisted deep transfer learning framework with applications to outlier detection in additive manufacturing'. Engineering Applications of Artificial Intelligence, 131 (May 2024). pp. 107700 - 107700. ISSN: 0952-1976 Open Access Link

Hou, N., Wang, Z., Dong, H., Shen, Y. and Liu, H. (2023) 'Distributed Fault Estimation over Sensor Networks with Randomly Switching Topologies under Binary Encoding Scheme'. IEEE Transactions on Network Science and Engineering, 11 (3). pp. 2715 - 2728.

Chen, Z., Yang, R., Huang, M., Li, F., Lu, G. and Wang, Z. (2023) 'EEGProgress: A fast and lightweight progressive convolution architecture for EEG classification'. Computers in Biology and Medicine, 169 (February 2024). pp. 1 - 10. ISSN: 0010-4825 Open Access Link

Guo, X., Wang, Z., Wu, P., Li, Y., Alsaadi, FE. and Zeng, N. (2023) 'ELTS-Net: An enhanced liver tumor segmentation network with augmented receptive field and global contextual information'. Computers in Biology and Medicine, 169 (February 2024). pp. 1 - 9. ISSN: 0010-4825 Open Access Link

Shen, Y., Wang, Z. and Dong, H. (2023) 'Analysis and Synthesis for Networked Multi-Rate Systems'. Boca Raton, FL, USA: CRC Press. ISSN 10: 1-032-61950-3 ISSN 13: 978-1-032-55562-1

Wei, M., Yang, R., Huang, M., Ni, J., Wang, Z. and Liu, X. (2023) 'Sub-Band Cascaded CSP-based Deep Transfer Learning for Cross-Subject Lower Limb Motor Imagery Classification'. IEEE Transactions on Cognitive and Developmental Systems, 0 (early access). pp. 1 - 14. ISSN: 2379-8920 Open Access Link

Longo, K., Wang, X. and Zhao, H. (2023) 'Advanced diesel-hythane combustion for maximum reduction in CO2 and GHG emissions'.International Conference on Powertrain Systems for a Sustainable Future 2023. London, UK. 4 - 30 November. CRC Press. pp. 71 - 100.

Lei, Z., Wang, Z., Bo, S. and Hongli, D. (2023) 'Encryption-decryption-based state estimation with multi-rate measurements against eavesdroppers: a recursive minimum-variance approach'. IEEE Transactions on Automatic Control, 68 (12). pp. 8111 - 8118. ISSN: 0018-9286

Elsadd, MA., Zobaa, AF., Khattab, HA., Abd El Aziz, AM. and Fetouh, T. (2023) 'Communicationless overcurrent relays coordination for active distribution network considering fault repairing periods'. Energies, 16 (23). pp. 1 - 32.Open Access Link

Wang, Y., Wang, Z., Zou, L. and Dong, H. (2023) 'On H∞Fuzzy Proportional-Integral Observer Design Under Amplify-and-Forward Relays and Multirate Measurements'. IEEE Transactions on Fuzzy Systems, 32 (4). pp. 1873 - 1885. ISSN: 1063-6706

Xiao, L., Cao, P., Wang, Z. and Liu, S. (2023) 'A novel fixed-time error-monitoring neural network for solving dynamic quaternion-valued Sylvester equations'. Neural Networks, 170. pp. 494 - 505. ISSN: 0893-6080

Momenikorbekandi, A. and Abbod, M. (2023) 'Intelligent Scheduling Based on Reinforcement Learning Approaches: Applying Advanced Q-Learning and State–Action–Reward–State–Action Reinforcement Learning Models for the Optimisation of Job Shop Scheduling Problems'. Electronics (Switzerland), 12 (23). pp. 1 - 16.Open Access Link

Yan, M., Li, Z., Lai, CS., Zhao, Z., Zobaa, AF., Lai, LL. and Shi, Z. et al. (2023) 'Energy management considering multiple power markets and microgrid storage'. Frontiers in Energy Research, 11. pp. 1 - 12.Open Access Link

Pei, E. and Lakomiec, M. (2023) 'Standardisation efforts of ISO/TC 261 “additive manufacturing” 22nd plenary meeting of ISO/TC 261 “additive manufacturing”'. Progress in Additive Manufacturing, 8 (6). pp. 1145 - 1146. ISSN: 2363-9512 Open Access Link

Li, M., Wang, Z., Li, K. and Liao, X. (2023) 'Multiagent-System-Based Attention Mechanism for Predicting Product Popularity: Handling Positive–Negative Diffusion Over Social Networks'. IEEE Transactions on Neural Networks and Learning Systems, 0 (early access). pp. 1 - 8. ISSN: 2162-237X Open Access Link

Elhalwagy, A. and Kalganova, T. (2023) 'Heterogeneous Induction Motor Current Dataset Fusion for Efficient Generalised MCSA-Based Fault Classification'.2023 IEEE Intl Conf on Dependable, Autonomic and Secure Computing, Intl Conf on Pervasive Intelligence and Computing, Intl Conf on Cloud and Big Data Computing, Intl Conf on Cyber Science and Technology Congress (DASC/PiCom/CBDCom/CyberSciTech). Abu Dhabi, United Arab Emirates. 14 - 17 November. IEEE. pp. 576 - 581. ISSN: 2837-0724

Banibaqash, A., Hunaiti, Z. and Abbod, M. (2023) 'Assessing the Potential of Qatari House Roofs for Solar Panel Installations: A Feasibility Survey'. Solar, 3 (4). pp. 650 - 662.Open Access Link

Salmi, M. and Pei, E. (2023) 'Additive manufacturing processes and materials for spare parts'. Journal of Mechanical Science and Technology, 37 (11). pp. 5979 - 5990. ISSN: 1738-494X Open Access Link

Pei, E. (2023) 'Editorial'. Progress in Additive Manufacturing, 0 (ahead of print). pp. 1 - 1. ISSN: 2363-9512

Gaballa, M. and Abbod, M. (2023) 'Simplified Deep Reinforcement Learning Approach for Channel Prediction in Power Domain NOMA System'. Sensors, 23 (21). pp. 1 - 21. ISSN: 1424-8220 Open Access Link

Alaraj, M., Parodi, M., Radi, M., Alsisi, E., Abbod, MF. and Majdalawieh, M. (2023) 'Occupancy-based one-year-ahead heating, ventilation, and air-conditioning electricity consumption optimization using machine learning'. Journal of Building Engineering, 80 (1 December 2023). pp. 1 - 21. ISSN: 2352-7102

Zhu, K., Wang, Z., Wei, G. and Liu, X. (2023) 'Adaptive Set-Membership State Estimation for Nonlinear Systems Under Bit Rate Allocation Mechanism: A Neural-Network-Based Approach'. IEEE Transactions on Neural Networks and Learning Systems, 34 (11). pp. 833 - 8348. ISSN: 2162-237X

Korany, E., Yousri, D., Attia, HA., Zobaa, AF. and Allam, D. (2023) 'A novel optimized dynamic fractional-order MPPT controller using hunter pray optimizer for alleviating the tracking oscillation with changing environmental conditions'. Energy Reports, 10. pp. 1819 - 1832. ISSN: 2352-4847 Open Access Link

Garner, R. and Dehouche, Z. (2023) 'Optimal Design and Analysis of a Hybrid Hydrogen Energy Storage System for an Island-Based Renewable Energy Community'. Energies, 16 (21). pp. 1 - 23.Open Access Link

Zolfagharian, A., Pei, E., Scalet, G. and Bodaghi, M. (2023) 'Special issue “New Trends in 4D Printing: from Design to Materials and Applications”'. Progress in Additive Manufacturing, 0 (ahead of print). pp. 1 - 1. ISSN: 2363-9512

Klahn, C., Butler, D. and Pei, E. (2023) 'Economics of Additive Manufacturing', in Pei, E., Bernard, A., Gu, D., Klahn, C., Monzón, M., Petersen, M. and Sun, T. et al. (eds.) Springer Handbook of Additive Manufacturing. Cham, Switzerlland : Springer. , Part F1592. pp. 31 - 42. ISBN 10: 3-031-20752-1. ISBN 13: 978-3-031-20751-8.

Hardacre, DG. and Pei, E. (2023) 'Standards for Additive Manufacturing', in Pei, E., Bernard, A., Gu, D., Klahn,, C., Monzón, M., Petersen, M. and Sun, T. et al. (eds.) Springer Handbook of Additive Manufacturing. Springer International Publishing. , Part F1592. pp. 145 - 161. ISBN 10: 3-031-20752-1. ISBN 13: 978-3-031-20751-8.

Pei, E., Kabir, IR. and Leutenecker-Twelsiek, B. (2023) 'History of AM', in Pei, E., Bernard, A., Gu, D., Klahn, C., Monzón, M., Petersen, M. and Sun, T. et al. (eds.) Springer Handbook of Additive Manufacturing. Cham, Switzerlland : Springer. , Part F1592. pp. 3 - 29. ISBN 10: 3-031-20752-1. ISBN 13: 978-3-031-20751-8.

Elhalwagy, A. and Kalganova, T. (2023) 'A Dataset Fusion Algorithm for Generalised Anomaly Detection in Homogeneous Periodic Time Series Datasets'. IEEE Access, 11. pp. 121212 - 121230.Open Access Link

Cretu, I., Tindale, A., Abbod, M., Khir, A., Balachandran, W. and Meng, H. (2023) 'Reliable Multimodal Heartbeat Classification using Deep Neural Networks'. Journal of Biomedical Engineering and Biosciences, 10. pp. 41 - 52.Open Access Link

Hou, N., Wang, Z., Shen, Y., Liu, H. and Dong, H. (2023) 'A non-fragile approach to fault estimation for a class of multi-rate systems under binary encoding schemes'. International Journal of Robust and Nonlinear Control, 34 (2). pp. 751 - 772. ISSN: 1049-8923 Open Access Link