Dong, XX., He, LJ., Mi, GB. and Li, PJ. (2014) 'Dynamic investigation of the finite dissolution of silicon particles in aluminum melt with a lower dissolution limit'. Chinese Physics B, 23 (11). pp. 110204 - 110204. ISSN: 1674-1056

Fang, C., Li, W-F., Koster, RS., Klimeš, J., van Blaaderen, A. and van Huis, MA. (2014) 'The accurate calculation of the band gap of liquid water by means of GW corrections applied to plane-wave density functional theory molecular dynamics simulations'. Physical Chemistry Chemical Physics, 17 (1). pp. 365 - 375. ISSN: 1463-9076 Open Access Link

Krishnan, G., Negrea, RF., Ghica, C., Ten Brink, GH., Kooi, BJ. and Palasantzas, G. (2014) 'Synthesis and exceptional thermal stability of Mg-based bimetallic nanoparticles during hydrogenation'. Nanoscale, 6 (20). pp. 11963 - 11970. ISSN: 2040-3364

Yang, W., Ji, S., Wang, M. and Li, Z. (2014) 'Precipitation behaviour of Al-Zn-Mg-Cu alloy and diffraction analysis from η′ precipitates in four variants'. Journal of Alloys and Compounds, 610. pp. 623 - 629. ISSN: 0925-8388 Open Access Link

Liu, D., Liu, Y., Huang, Y., Song, R. and Chen, M. (2014) 'Effects of solidification cooling rate on the corrosion resistance of Mg-Zn-Ca alloy'. Progress in Natural Science: Materials International, 24 (5). pp. 452 - 457. ISSN: 1002-0071 Open Access Link

Balart, MJ. and Fan, Z. (2014) 'Surface oxidation of molten AZ31, AM60B and AJ62 magnesium alloys in air'. International Journal of Cast Metals Research, 27 (5). pp. 301 - 311. ISSN: 1364-0461

Kotadia, HR., Patel, JB., Li, HT., Gao, F. and Fan, Z. (2014) 'Microstructure evolution in melt conditioned direct chill (MC-DC) casting of Fe-rich al-alloy'.AMI Light Metals Conference 2014. Pilanesberg National Park, South Africa. 1 - 17 October. Trans Tech Publications, Ltd.. pp. 90 - 95. ISSN: 1022-6680 Open Access Link

Tirumalasetty, GK., Fang, CM., Jansen, J., Yokosawa, T., Boeije, MFJ., Sietsma, J., Van Huis, MA. and Zandbergen, HW. et al. (2014) 'Structural tale of two novel (Cr, Mn)C carbides in steel'. Acta Materialia, 78. pp. 161 - 172. ISSN: 1359-6454

Lu, L., Huang, JF., Hou, LG., Zhang, JX., Wang, HB., Cui, H. and Zhang, JS. et al. (2014) 'Effect of niobium on the microstructure and properties of spray-formed M3:2 high speed steel'. Beijing Keji Daxue Xuebao/Journal of University of Science and Technology Beijing, 36 (10). pp. 1292 - 1298. ISSN: 1001-053X

Chang, I. and Peng, T. (2014) 'A Novel Method to Homogenously Disperse Carbon Nanotubes in Aluminum Powders'.Euro PM2014 Congress. Salzburg. 21 - 24 September. Conference Proceedings.

Wang, G., Dargusch, MC., Qian, M., Eskin, D. and StJohn, DH. (2014) 'The role of ultrasonic treatment in refining the as-cast grain structureduring the solidification of an Al–2Cu alloy'. Journal of Crystal Growth, 408 (1). pp. 119 - 124. ISSN: 0022-0248 Open Access Link

Huo, W., Hou, L., Cui, H., Zhuang, L. and Zhang, J. (2014) 'Fine-grained AA 7075 processed by different thermo-mechanical processings'. Materials Science and Engineering: A, 618. pp. 244 - 253. ISSN: 0921-5093

Gao, T., Zhu, X., Qiao, H. and Liu, X. (2014) 'A new Al-Fe-P master alloy designed for application in low pressure casting and its refinement performance on primary Si in A390 alloy at low temperature'. Journal of Alloys and Compounds, 607. pp. 11 - 15. ISSN: 0925-8388

Assadi, H., Gaertner, F., Klassen, T., Heinrich, P., Kreye, H. and Kroemmer, W. (Accepted) 'Method for manufacturing diamond'.

Nowak, M., Bolzoni, L. and Nadendla, HB. (2014) 'Grain refinement of Al-Si alloys by Nb-B inoculation. Part I: concept development and effect on binary alloys'. Materials and Design, 66 (PA). pp. 366 - 375. ISSN: 1873-4197 Open Access Link

Bolzoni, L., Nowak, K. and Nadendla, HB. (2014) 'Grain refinement of Al-Si alloys by Nb-B inoculation. Part II: application to commercial alloys'. Materials and Design, 66, Part A, (5 February 2015). pp. 376 - 383. ISSN: 1873-4197 Open Access Link

Srinivasan, A., Blawert, C., Huang, Y., Mendis, CL., Kainer, KU. and Hort, N. (2014) 'Corrosion behavior of Mg-Gd-Zn based alloys in aqueous NaCl solution'. Journal of Magnesium and Alloys, 2 (3). pp. 245 - 256. ISSN: 2213-9567

Que, ZP., Ma, T., Wang, J., Chen, J., Wang, CH. and Cheng, WL. (2014) 'Microstructure and mechanical properties of as-cast Mg-8Sn-1Al-1Zn-xNi alloys'. Journal of Central South University, 21 (9). pp. 3426 - 3433. ISSN: 2095-2899

Badica, P., Aldica, G., Burdusel, M., Popa, S., Negrea, RF., Enculescu, M., Pasuk, I. and Miu, L. et al. (2014) 'Significant enhancement of the critical current density for cubic BN addition into ex situ spark plasma sintered MgB2'. Superconductor Science and Technology, 27 (9). pp. 095013 - 095013. ISSN: 0953-2048

Wiese, B., Mendis, CL., Tolnai, D., Stark, A., Schell, N., Reichel, HP., Brückner, R., Kainer, KU. and Hort, N. et al. (2014) 'CaO dissolution during melting and solidification of a Mg-10 wt.% CaO alloy detected with in situ synchrotron radiation diffraction'. Journal of Alloys and Compounds, 618. pp. 64 - 66. ISSN: 0925-8388

Yang, H., Watson, D., Wang, Y. and Ji, S. (2014) 'Effect of nickel on the microstructure and mechanical property of die-cast Al–Mg–Si–Mn alloy'. Journal of Materials Science, 49 (24). pp. 8412 - 8422. ISSN: 0022-2461 Open Access Link

Su, SS., Chang, ITH., Kuo, WCH., Price, D., Pikramenou, Z. and Lead, J. (2014) 'Pulsed electrical discharge synthesis of red photoluminescence zinc oxide nanoparticles'. Journal of Nanoparticle Research, 16 (9). ISSN: 1388-0764

Scarisoreanu, ND., Craciun, F., Birjega, R., Andrei, A., Ion, V., Negrea, RF., Ghica, C. and Dinescu, M. et al. (2014) 'Strain-induced long range ferroelectric order and linear electro-optic effect in epitaxial relaxor thin films'. Journal of Applied Physics, 116 (7). ISSN: 0021-8979

Eskin, GI. and Eskin, DG. (2014) 'Ultrasonic Treatment of Light Alloy Melts'. Boca Raton, FL: CRS Press. ISSN 13: 978-1-4665-7798-5

Men, H. and Fan, Z. (2014) 'An Analytical Model for Solute Segregation at Liquid Metal/Solid Substrate Interface'. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 45 (12). pp. 5508 - 5516. ISSN: 1073-5623

Lázaro, J., Solórzano, E., Rodríguez-Pérez, MA., Rämer, O., García-Moreno, F. and Banhart, J. (2014) 'Heat Treatment of Aluminium Foam Precursors: Effects on Foam Expansion and Final Cellular Structure'. Procedia Materials Science, 4. pp. 287 - 292. ISSN: 2211-8128 Open Access Link

Eskin, GI. and Eskin, DG. (2014) 'Ultrasonic Treatment of Light Alloy Melts'. London: Routledge. ISSN 13: 9781466577985

Yang, W., Ji, S., Zhou, X., Stone, I., Scamans, G., Thompson, GE. and Fan, Z. et al. (2014) 'Heterogeneous nucleation of α-Al grain on primary α-AlFeMnSi intermetallic investigated using 3d sem ultramicrotomy and HRTEM'. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 45 (9). pp. 3971 - 3980. ISSN: 1073-5623 Open Access Link

Wang, HB., Hou, LG., Zhang, JX., Lu, L., Cui, H., Huang, JF. and Zhang, JS. et al. (2014) 'Microstructures and high temperature properties of spray formed niobium-containing M3 high speed steel'. Materialwissenschaft und Werkstofftechnik, 45 (8). pp. 689 - 698. ISSN: 0933-5137

Hajian, M., Abdollah-Zadeh, A., Rezaei-Nejad, SS., Assadi, H., Hadavi, SMM., Chung, K. and Shokouhimehr, M. et al. (2014) 'Improvement in cavitation erosion resistance of AISI 316L stainless steel by friction stir processing'. Applied Surface Science, 308. pp. 184 - 192. ISSN: 0169-4332

Lalpoor, M., Miroux, A., Mendis, CL., Hort, N. and Offerman, SE. (2014) 'The interaction of precipitation and deformation in a binary Mg-Ca alloy at elevated temperatures'. Materials Science and Engineering: A, 609. pp. 116 - 124. ISSN: 0921-5093

Ghica, C., Negrea, RF., Nistor, LC., Chirila, CF. and Pintilie, L. (2014) 'Nanoscale monoclinic domains in epitaxial SrRuO3 thin films deposited by pulsed laser deposition'. Journal of Applied Physics, 116 (2). ISSN: 0021-8979

Zhu, X., Wu, Y., Li, C., Li, P., Qiao, H. and Liu, X. (2014) 'The dispersive orientated-precipitation of AlP on alumina film and its effect on the primary Si gathering behavior in the Al-Si alloy surface layer'. CrystEngComm, 16 (25). pp. 5583 - 5590. ISSN: 1466-8033

Zhang, X., Sun, J., Zhou, C., Zhang, Y., Ma, N. and Wang, H. (2014) 'Improvement of Grain Refinement Efficiency in Pure Aluminum by Embryos Proliferation'. Materials and Manufacturing Processes, 29 (7). pp. 826 - 831. ISSN: 1042-6914

Lazaro Nebreda, J. (2014) 'Optimización de la estructura celular en espumas de aluminio'. PhD Thesis.

Batalu, D., Aldica, G., Popa, S., Miu, L., Enculescu, M., Negrea, RF., Pasuk, I. and Badica, P. et al. (2014) 'High magnetic field enhancement of the critical current density by Ge, GeO2 and Ge2C6H10O7 additions to MgB2'. Scripta Materialia, 82. pp. 61 - 64. ISSN: 1359-6462

Peng, T. and Chang, I. (2014) 'Mechanical alloying of multi-walled carbon nanotubes reinforced aluminum composite powder'. Powder Technology, 266. pp. 7 - 15. ISSN: 0032-5910

Barekar, NS. and Dhindaw, BK. (2014) 'Twin-roll casting of aluminum alloys - An overview'. Materials and Manufacturing Processes, 29 (6). pp. 651 - 661. ISSN: 1042-6914

Men, H. and Fan, Z. (2014) 'Molecular dynamic simulation of the atomic structure of aluminum solid-liquid interfaces'. Materials Research Express, 1 (2). pp. 025705 - 025705. ISSN: 2053-1591

Tan, XP., Mangelinck, D., Perrin-Pellegrino, C., Rougier, L., Gandin, CA., Jacot, A., Ponsen, D. and Jaquet, V. et al. (2014) 'Atom probe tomography of secondary γ′ precipitation in a single crystal Ni-based superalloy after isothermal aging at 1100 °c'. Journal of Alloys and Compounds, 611. pp. 389 - 394. ISSN: 0925-8388

Wang, S., Fan, Z., Koster, RS., Fang, C., Van Huis, MA., Yalcin, AO., Tichelaar, FD., Zandbergen, HW. and Vlugt, TJH. et al. (2014) 'New ab initio based pair potential for accurate simulation of phase transitions in ZnO'. Journal of Physical Chemistry C, 118 (20). pp. 11050 - 11061. ISSN: 1932-7447

Yang, W., Ji, S., Stone, I., Scamans, G., Fan, Z., Zhou, X. and Thompson, GE. et al. (2014) 'Heterogeneous Nucleation of α-Al Grain on Primary α-AlFeMnSi Intermetallic Investigated Using 3D SEM Ultramicrotomy and HRTEM'. Metallurgical and Materials Transactions A, 45A (9). pp. 3971 - 3980. ISSN: 1073-5623 Open Access Link

Yalcin, AO., Fan, Z., Goris, B., Li, W-F., Koster, RS., Fang, C-M., van Blaaderen, A., Casavola, M., Tichelaar, FD., Bals, S., Van Tendeloo, G., Vlugt, TJH., Vanmaekelbergh, D., Zandbergen, HW. and van Huis, MA. et al. (2014) 'Atomic Resolution Monitoring of Cation Exchange in CdSe-PbSe Heteronanocrystals during Epitaxial Solid–Solid–Vapor Growth'. Nano Letters, 14 (6). pp. 3661 - 3667. ISSN: 1530-6984 Open Access Link

Basak, CB., Krishnan, M., Kumar, R., Abdullah, KK. and Anantharaman, S. (2014) 'Characterization and process evaluation of Ni-Ti-Fe shape memory alloy macro-spheres directly fabricated via rotating electrode process'. Journal of Alloys and Compounds, 597. pp. 15 - 20. ISSN: 0925-8388

Amarande, L., Miclea, C., Cioangher, M., Grecu, MN., Pasuk, I. and Negrea, RF. (2014) 'Influence of co-dopants average valence on microstructural and electromechanical properties of lead titanate ceramics'. Journal of the European Ceramic Society, 34 (5). pp. 1191 - 1200. ISSN: 0955-2219

Stoflea, LE., Apostol, NG., Chirila, C., Trupina, L., Negrea, R., Pintilie, L. and Teodorescu, CM. et al. (2014) 'Schottky barrier versus surface ferroelectric depolarization at Cu/Pb(Zr, Ti)O3 interfaces'. Journal of Materials Science, 49 (9). pp. 3337 - 3351. ISSN: 0022-2461

Li, JH., Zarif, MZ., Albu, M., McKay, BJ., Hofer, F., Schumacher, P. and Schumacher, P. et al. (2014) 'Nucleation kinetics of entrained eutectic Si in Al-5Si alloys'. Acta Materialia, 72. pp. 80 - 98. ISSN: 1359-6454

Chang, I. and Brown, P. (2014) 'Synthesis and characterisation of Si doped boron carbide'.MACH Conference. Annapolis. 9 - 11 April. Conference Proceedings.

Chang, I., Peng, T. and Uzunsoy, D. (2014) 'Investigation of Wear Behaviour of Aluminium Alloy Reinforced with Carbon Nanotubes'.SAE 2014 World Congress and Exhibition. Michigan. 8 - 10 April. SAE International. pp. 596 - 601. ISSN: 1946-3979

Hassani, A., Bagherpour, E. and Qods, F. (2014) 'Influence of pores on workability of porous Al/SiC composites fabricated through powder metallurgy + mechanical alloying'. Journal of Alloys and Compounds, 591. pp. 132 - 142. ISSN: 0925-8388

Zafarani, HR., Hassani, A. and Bagherpour, E. (2014) 'Achieving a desirable combination of strength and workability in Al/SiC composites by AHP selection method'. Journal of Alloys and Compounds, 589. pp. 295 - 300. ISSN: 0925-8388