Behjat, A., Shamanian, M., Sadeghi, F., Iuliano, L. and Saboori, A. (2023) 'Additive manufacturing of a novel in-situ alloyed AISI316L-Cu stainless steel: Microstructure and antibacterial properties'. Materials Letters, 355. pp. 1 - 5. ISSN: 0167-577X

Kumarage, GWC., Panamaldeniya, SA., Maddumage, DC., Moumen, A., Maraloiu, VA., Mihalcea, CG., Negrea, RF., Dassanayake, BS., Gunawardhana, N., Zappa, D., Galstyan, V. and Comini, E. et al. (2023) 'Synthesis of TiO2-(B) Nanobelts for Acetone Sensing'. Sensors, 23 (19). pp. 8322 - 8322. ISSN: 1424-8220

Priyadarshi, A., Krzemień, W., Salloum-Abou-Jaoude, G., Broughton, J., Pericleous, K., Eskin, D. and Tzanakis, I. et al. (2023) 'Effect of water temperature and induced acoustic pressure on cavitation erosion behaviour of aluminium alloys'. Tribology International, 189. pp. 1 - 16. ISSN: 0301-679X Open Access Link

Essien, A., Li, Z., Barbatti, C., Mendis, C. and Huang, Y. (2023) 'Mechanical Property Enhancement Due to Plastic Deformation Prior to Peak-Age Hardening in an Al-Mg-Si Aluminium Alloy'.14th International Conference on the Technology of Plasticity - Current Trends in the Technology of Plasticity. Mandelieu-La Napoule, France. 20 - 29 September. Springer Nature Switzerland. pp. 606 - 615. ISSN: 2195-4356 Open Access Link

Daneshian, B., Gärtner, F., Weber, WE., Assadi, H. and Klassen, T. (2023) 'The impact of binding energies on the necessary conditions in aerosol deposition'. PAMM, 23 (3). pp. 1 - 7. ISSN: 1617-7061 Open Access Link

Doroshenko, V., Shurkin, P., Sviridova, T., Fortuna, A. and Shkaley, I. (2023) 'Phase Composition and Microstructure of Cast Al-6%Mg-2%Ca-2%Zn Alloy with Fe and Si Additions'. Metals, 13 (9). pp. 1 - 19.Open Access Link

Naseri, M., Reihanian, M., Moghaddam, AO., Gholami, D., Hosseini, S., Alvand, M., Borhani, E. and Trofimov, E. et al. (2023) 'Improving strength-ductility synergy of nano/ultrafine-structured Al/Brass composite by cross accumulative roll bonding process'. Journal of Materials Research and Technology, 0 (in press, pre-proof). pp. 1 - 30. ISSN: 2238-7854 Open Access Link

Huang, R., Tang, S., Feng, T., Wu, S., Li, X., Lan, S., Liu, G., Yang, L., Yan, G. and Kou, Z. et al. (2023) 'Characterization on microstructure evolution of a bulk nanograined TiZrHfNb refractory high-entropy alloy'. Materials Characterization, 205 (November 2023). pp. 1 - 8. ISSN: 1044-5803

Ernst, KR., Ernst, TM., Gärtner, F., Assadi, H. and Klassen, T. (2023) 'Bonding probabilities in cold spray deposition of composite blends'. Surface and Coatings Technology, 473. pp. 1 - 18. ISSN: 0257-8972 Open Access Link

Zhang, K., Shao, Z., Robson, J., Huang, Y., Zheng, J. and Jiang, J. (2023) 'Achieving high ductility and strength in magnesium alloy through cryogenic-hot forming'. Journal of Magnesium and Alloys, 11 (9). pp. 3130 - 3140. ISSN: 2213-9567

Dong, X., Xia, M., Wang, F., Yang, H., Ji, G., Nyberg, EA. and Ji, S. et al. (2023) 'A super wear-resistant coating for Mg alloys achieved by plasma electrolytic oxidation and discontinuous deposition'. Journal of Magnesium and Alloys, 11 (8). pp. 2939 - 2952. ISSN: 2213-9567 Open Access Link

Tiwari, T., Jalalian, S., Mendis, C. and Eskin, D. (2023) 'Classification of T6 tempered 6XXX series aluminum alloys based on machine learning principles'. JOM Journal of the Minerals, Metals and Materials Society, 75 (11). pp. 4526 - 4537. ISSN: 1047-4838 Open Access Link

Bakhtiari, M., Sadeghi, F., Sato, H., Um, W., Yim, CH. and Lee, H-S. (2023) 'Microstructure and texture analysis of 304 austenitic stainless steel using Bragg edge transmission imaging'. Journal of Applied Crystallography, 56 (5). pp. 1 - 13. ISSN: 0021-8898 Open Access Link

Yang, F., Wang, J., Wen, T., Huang, S., Zhou, L., Yang, H. and Ji, S. et al. (2023) 'Manipulating microstructure and mechanical properties of laser powder bed fusion processed hypo-eutectic Al-13.3Mg2Si alloy via annealing'. Journal of Alloys and Compounds, 967. pp. 1 - 11. ISSN: 0925-8388

Chankitmunkong, S., Wang, F., Limmaneevichitr, C. and Eskin, D. (2023) 'Microstructure, hardening and mechanical properties of hypoeutectic Al-Ce-Ni alloys with Zr and Zr+Sc additions and the effect of ultrasonic melt processing'. Advanced Engineering Materials, 2023 (21). pp. 1 - 17. ISSN: 1438-1656 Open Access Link

Cai, Q., Fang, C., Lordan, E., Wang, Y., Chang, ITH. and Cantor, B. (2023) 'A novel Al-Si-Ni-Fe near-eutectic alloy for elevated temperature applications'. Scripta Materialia, 237. pp. 1 - 7. ISSN: 1359-6462 Open Access Link

Holroyd, H., Burnett, T. and Scamans, G. (2023) 'Environment-Induced Crack Initiation and Early Stages of Crack Growth in Aluminum Alloys, Part 2'. Corrosion, 79 (8). pp. 817 - 817. ISSN: 0010-9312 Open Access Link

Fang, CM. and Biswas, K. (2023) 'Preferential Eu Site Occupation and Its Consequences in the Ternary Luminescent Halides AB 2 I 5 ∶Eu 2+ (A = Li–Cs; B = Sr, Ba)'. Physical Review Applied, 4 (1). pp. 1 - 8. ISSN: 2331-7019 Open Access Link

Wang, J., Gao, J., Yang, H., Yang, F., Wen, T., Liu, Z., Zhang, L. and Ji, S. et al. (2023) 'High-strength Al–5Mg2Si–2Mg–2Fe alloy with extremely high Fe content for green industrial application through additive manufacturing'. Virtual and Physical Prototyping, 18 (1). pp. 1 - 15. ISSN: 1745-2759 Open Access Link

Yang, X., Gibbons, GJ., Tanner, DA., Li, Z., Wilson, P., Williams, MA. and Kotadia, HR. et al. (2023) 'Scan strategy induced microstructure and consolidation variation in the laser-powder bed fusion (L-PBF) additive manufacturing of low alloy 20MnCr5 steel'. Materials and Design, 232. pp. 1 - 15. ISSN: 0264-1275 Open Access Link

Wang, S., Wang, Y., Ramasse, QM., Schmid-Fetzer, R. and Fan, Z. (2023) 'Segregation of Yttrium at the Mg/MgO interface in an Mg-0.5Y Alloy'. Acta Materialia, 257. pp. 1 - 16. ISSN: 1359-6454 Open Access Link

Henry Holroyd, NJ., Burnett, TL., Lewandowski, JJ. and Scamans, GM. (2023) 'Environment-Induced Crack Initiation in Aluminum Alloys: Experimental Studies Since the 1950s and Future Opportunities'. Corrosion, 79 (8). pp. 850 - 867. ISSN: 0010-9312

Karakurt, EM., Cetin, Y., Incesu, A., Demirtas, H., Kaya, M., Yildizhan, Y., Tosun, M. and Huang, Y. et al. (2023) 'Microstructural, Biomechanical, and In Vitro Studies of Ti-Nb-Zr Alloys Fabricated by Powder Metallurgy'. Materials, 16 (12). pp. 1 - 18. ISSN: 1996-1944 Open Access Link

Eskin, D. (2023) 'For Georgy I. Eskin – On the occasion of his 90th birthday'. Ultrasonics Sonochemistry, 98. pp. 1 - 2. ISSN: 1350-4177 Open Access Link

Li, Z-D., Zhang, W-W., Li, G-T., Li, S-S., Ding, H-S., Zhang, T. and Song, Y-J. et al. (2023) 'Magnetic field annealing of FeCo-based amorphous alloys to enhance thermal stability and Curie temperature'. Rare Metals, 42 (6). pp. 2000 - 2006. ISSN: 1001-0521

Franconi, A., Ceschin, F., Godsell, J., Harrison, D., Mate, O-A. and Konteh, T. (2023) 'Co-creating sociotechnical visions for a circular metal economy transition in the UK'.Product Lifetimes and the Environment (PLATE). Espoo, Finland. 31 - 2 June. Proceedings of the 5th PLATE Conference. pp. 1 - 9.Open Access Link

Franconi, A., Ceschin, F., Terzioglu, N., Corsini, L. and Ghoreishi, M. (2023) 'Defining alternative recovery strategies for reuse: An analysis of multiple case studies under the reuse umbrella'.5th PLATE Conference (PLATE 2023). Espoo, Finland. 31 - 2 June. Proceedings 5th PLATE Conference. pp. 324 - 331. ISSN: 1799-4853 Open Access Link

Konteh, T., Ceschin, F., Harrison, D., Franconi, A. and Minton, T. (2023) 'Circular Product Design Strategies, Principles, and Guidelines for the Metal Sector'.5th PLATE Conference (PLATE 2023). Espoo, Finland. 31 - 2 June. Proceedings 5th PLATE Conference. pp. 524 - 531. ISSN: 1799-4853 Open Access Link

Bradley, CG., TerziogluTerzioglu, N., Franconi, A., Wilson, GT., Clark, N., Greenwood, SC., Fleet, K., Salvia, G., Ceschin, F., Iacovidou, E. and Corsini, L. et al. (2023) 'Towards a shared design research agenda for reusable packaging systems'.5th PLATE Conference (PLATE 2023). Espoo, Finland. 31 - 2 June. Proceedings 5th PLATE Conference. pp. 125 - 138. ISSN: 1799-4853 Open Access Link

Wiese, B., Celikin, M. and Mendis, CL. (2023) 'Relationships between Processing and Properties of Magnesium-Based Alloys'. Crystals, 13 (6). pp. 1 - 4.Open Access Link

Cai, Q., Zhou, M., Bagherpour, E., Hosseini, S., Mendis, C., Chang, I. and Assadi, H. et al. (2023) 'New Insight Into Crack-Healing Mechanism via Electropulsing Treatment'. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 54 (7). pp. 2960 - 2974. ISSN: 1073-5623 Open Access Link

Karakurt, EM., Huang, Y., Kaya, M., Demirtas, H., Acikgoz, A. and Demircan, G. (2023) 'Effect of Relative Density on Microstructure, Corrosion Resistance and Mechanical Performance of Porous Ti–20Zr Alloys Fabricated by Powder Metallurgy'. Arabian Journal for Science and Engineering, 0 (ahead-of-print). pp. 1 - 11. ISSN: 2193-567X

Karim, M., Liu, G., Eskin, D. and McKay, B. (2023) 'High Pressure Die Cast nAlN reinforced AZ91 Magnesium Alloy'.LightMe - First International Conference on Lightweight Materials. Milan.Open Access Link

Sadeghi, F., Zargar, T., Kim, SH., Heo, Y-U., Lee, JS. and Yim, CH. (2023) 'Evolution of centerline carbides in a martensitic stainless steel slab during reheating treatment'. Materials Characterization, 201. pp. 1 - 17. ISSN: 1044-5803

Fang, C. and Fan, Z. (2023) 'Atomic Ordering and Interfacial Interaction at Liquid-Mg/SiC{0 0 0 1} Interfaces: An Ab Initio Molecular Dynamics Study'. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 54 (7). pp. 2819 - 2826. ISSN: 1073-5623 Open Access Link

Eskin, DG. (2023) 'Ultrasonic degassing of liquids', in Gallego-Juárez, JA., Graff, KF. and Lucas, M. (eds.) Power Ultrasonics: Applications of High-Intensity Ultrasound, Second Edition. Cambridge : Woodhead Publishing. pp. 473 - 487. ISBN 10: 0-12-820254-8. ISBN 13: 978-0-323-85144-2.

Eskin, DG. and Tzanakis, I. (2023) 'Applications to solidification and casting of metals', in Gallego-Juárez, JA., Graff, KF. and Lucas, M. (eds.) Power Ultrasonics: Applications of High-Intensity Ultrasound, Second Edition. Cambridge : Woodhead Publishing. pp. 489 - 507. ISBN 10: 0-12-820254-8. ISBN 13: 978-0-323-85144-2.

Ghorbani, HR., Kermanpur, A., Rezaeian, A., Sadeghi, F. and Siahboumi, AA. (2023) 'Solidification behavior and microstructural features of the cast and HIPed N-bearing Ti–48Al–2Cr–2Nb intermetallic alloys'. Journal of Materials Research and Technology, 24. pp. 5215 - 5234. ISSN: 2238-7854 Open Access Link

Fang, C. and Fan, Z. (2023) 'Segregation of Alkaline Earth Atoms Affects Prenucleation at L-Al/γ-Alumina Interfaces'. Metals, 13 (4). pp. 1 - 12.Open Access Link

Yang, F., Wang, J., Wen, T., Huang, S., Liu, Z., Ji, S. and Yang, H. et al. (2023) 'Laser powder bed fusion of a novel high strength Al-Mg alloy via Si and Zn microalloying'. Materials Letters, 343. pp. 1 - 4. ISSN: 0167-577X

Wang, H., Qi, H., Sun, X., Jia, S., Li, X., Miao, TJ., Xiong, L., Wang, S., Zhang, X., Liu, X., Wang, A., Zhang, T., Huang, W. and Tang, J. et al. (2023) 'High quantum efficiency of hydrogen production from methanol aqueous solution with PtCu–TiO2 photocatalysts'. Nature Materials, 22 (5). pp. 619 - 626. ISSN: 1476-1122

Chankitmunkong, S., Eskin, DG., Limmaneevichitr, C. and Pandee, P. (2023) 'Synergetic grain refinement and ZrB2 hardening in in-situ ZrB2/AA4032-type composites by ultrasonic assisted melt treatment'. Journal of Materials Research and Technology, 24. pp. 2879 - 2890. ISSN: 2238-7854 Open Access Link

Cai, Q., Lordan, E., Wang, S., Liu, G., Mendis, CL., Chang, ITH. and Ji, S. et al. (2023) 'Die-cast multicomponent near-eutectic and hypoeutectic Al–Si–Ni–Fe–Mn alloys: Microstructures and mechanical properties'. Materials Science and Engineering A, 872. pp. 1 - 14. ISSN: 0921-5093 Open Access Link

Yang, F., Wang, J., Wen, T., Ai, X., Dong, X., Yang, H. and Ji, S. et al. (2023) 'Microstructure and mechanical properties of pseudo binary eutectic Al–Mg2Si alloy processed by laser powder bed fusion'. Journal of Materials Research and Technology, 24. pp. 2187 - 2199. ISSN: 2238-7854 Open Access Link

Chankitmunkong, S., Eskin, DG., Limmaneevichitr, C., Pandee, P. and Diewwanit, O. (2023) 'Effect of Zr and Sc on Intermetallic Morphology and Hardening of an Al–Fe Alloy'.TMS Annual Meeting & Exhibition (TMS 2023): The Light Metals symposia. San Diego, CA, USA. 19 - 23 March. Springer Nature Switzerland. pp. 1252 - 1256. ISSN: 2367-1181

Eskin, D., Komarov, S. and Tzanakis, I. (2023) 'Sonoprocessing of materials (Special issue)'. Ultrasonics Sonochemistry, 96. pp. 1 - 1. ISSN: 1350-4177 Open Access Link

Gao, X., Jiang, W., Lu, Y., Ding, Z., Liu, J., Liu, W., Sha, G., Wang, T., Li, T., Chang, ITH. and Zhao, Y. et al. (2023) 'Excellent strength-ductility combination of Cr26Mn20Fe20Co20Ni14 high-entropy alloy at cryogenic temperatures'. Journal of Materials Science and Technology, 154. pp. 166 - 177. ISSN: 1005-0302

Lebon, B. (2023) 'directChillFoam: an OpenFOAM application for direct-chill casting'. Journal of Open Source Software, 8 (82). pp. 1 - 4.Open Access Link

Khavari, M., Priyadarshi, A., Morton, J., Porfyrakis, K., Pericleous, K., Eskin, D. and Tzanakis, I. et al. (2023) 'Cavitation-induced shock wave behaviour in different liquids'. Ultrasonics Sonochemistry, 94. pp. 1 - 14. ISSN: 1350-4177 Open Access Link

Abu Amara, A., Liu, G., Eskin, D. and McKay, B. (2023) 'Stability of SiC and Al2O3 Reinforcement Particles in Thermomechanical Processed Direct Chill Cast Al MMnCs'.TMS Annual Meeting 2023. San Diego, CA, USA. 9 - 23 March. Springer Nature Switzerland. pp. 1005 - 1014. ISSN: 2367-1181

Courtenay, J. and Wang, Y. (2023) 'Recent Studies Using HR-TEM on the Fundamental Mechanism of Nucleation of a-Aluminum on TiB2 in TiB D High-Efficiency Grain Refiners'.Light Metals 2023 Symposia (TMS 2023 Annual Meeting & Exhibition). San Diego, CA, USA. 9 - 21 March. Springer Nature Switzerland. pp. 967 - 973. ISSN: 2367-1181