BCAST
View our websiteBabu, NH., Kambara, M., Shi, Y., Cardwell, DA., Tarrant, CD. and Schneider, KR. (2003) 'Development of the microstructure of uranium-doped Nd-Ba-Cu-O'. IEEE Transactions on Applied Superconductivity, 13 (2 III). pp. 3147 - 3150. ISSN: 1051-8223
Vanderbemden, P., Dorbolo, S., Hari-Babu, N., Ntatsis, A., Cardwell, DA. and Campbell, AM. (2003) 'Behavior of bulk melt-textured YBCO single domains subjected to crossed magnetic fields'. IEEE Transactions on Applied Superconductivity, 13 (2 III). pp. 3746 - 3749. ISSN: 1051-8223
Kunz, VD., Uchino, T., De Groot, CH., Ashburn, P., Donaghy, DC., Hall, S., et al. (2003) 'Reduction of parasitic capacitance in vertical MOSFETs by spacer local oxidation'. IEEE Transactions on Electron Devices, 50 (6). pp. 1487 - 1493. ISSN: 0018-9383
Fang, CM., Li, YQ., Hintzen, HT. and De With, G. (2003)
'Crystal and electronic structure of the novel nitrides MYSi
El Mubarek, HAW., Bonar, JM., Ashburn, P., Wang, Y., Hemment, P., Buiu, O. and et al. (2003) 'Non-selective growth of SiGe heterojunction bipolar trasistor layers at 700°C with dual control of n- and p-type dopant profiles'. Journal of Materials Science: Materials in Electronics, 14 (5-7). pp. 261 - 265. ISSN: 0957-4522
Fang, CM., De Wijs, GA., Hintzen, HT. and De With, G. (2003)
'Phonon spectrum and thermal properties of cubic Si
Huang, Y. and Humphreys, FJ. (2003) 'Reconstruction of grains and subgrains from EBSD orientation maps'.RMS EBSD Symposium 2003. Swansea, UK. 5 - 6 April. [unpublished]
Ji, S. (2003) 'The fragmentation of primary dendrites during shearing in semisolid processing'. Journal of Materials Science, 38 (7). pp. 1559 - 1564. ISSN: 0022-2461
Sareen, A., Wang, Y., Södervall, U., Lundgren, P. and Bengtsson, S. (2003) 'Effect of Si cap layer on parasitic channel operation in Si/SiGe metal-oxide-semiconductor structures'. Journal of Applied Physics, 93 (6). pp. 3545 - 3552. ISSN: 0021-8979
Hintzen, HT., Hendrix, MRMM., Wondergem, H., Fang, CM., Sekine, T. and De With, G. (2003)
'Thermal expansion of cubic Si
Fang, CM., Ramanujachary, KV., Hintzen, HT. and De With, G. (2003) 'Electronic structure of magnesium nitride-fluorides from first-principles calculations'. Journal of Alloys and Compounds, 351 (1-2). pp. 72 - 76. ISSN: 0925-8388
Van Boggelen, JWK., Eskin, DG. and Katgerman, L. (2003) 'Permeability of the mushy zone in aluminum alloys: Evaluation of different approaches'.Light Metals Symposium held at the 132nd TMS Annual Meeting. SAN DIEGO, CA. 2 - 6 March. MINERALS, METALS & MATERIALS SOC. pp. 759 - 766. ISSN: 0147-0809
Fang, CM., De Wijs, GA., Orhan, E., De With, G., De Groot, RA., Hintzen, HT. and et al. (2003)
'Local structure and electronic properties of BaTaO
Fang, CM. and Metselaar, R. (2003) 'Site preferences in β-sialon from first-principles calculations'. Journal of Materials Chemistry, 13 (2). pp. 335 - 337. ISSN: 0959-9428
Eskin, DG. (2003) 'Decomposition of supersaturated solid solutions in Al-Cu-Mg-Si alloys'. Journal of Materials Science, 38 (2). pp. 279 - 290. ISSN: 0022-2461
Fang, CM. and Metselaar, R. (2003)
'First-Principles Calculations of Microdomain Models for β-Sialon Si
Tang, H., Wrobel, LC. and Fan, Z. (2003) 'Fluid flow aspects of twin-screw extruder process: numerical simulations of TSE rheomixing'. Modelling and Simulation in Materials Science and Engineering, 11 (5). pp. 771 - 790. ISSN: 0965-0393
Das, A. and Fan, Z. (2003) 'Morphological development of solidification structures under forced fluid flow: experimental observation'. Materials Science and Technology, 19 (5). pp. 573 - 580. ISSN: 0267-0836
Fang, X., Fan, Z., Ralph, B., Evans, P. and Underhill, R. (2003) 'The relationships between tensile properties and hole expansion property of C-Mn steels'. Journal of Materials Science, 38 (18). pp. 3877 - 3882. ISSN: 0022-2461
Fang, X., Fan, Z., Ralph, B., Evans, P. and Underhill, R. (2003) 'Effects of tempering temperature on tensile and hole expansion properties of a C-Mn steel'. Journal of Materials Processing Technology, 132 (1-3). pp. 215 - 218. ISSN: 0924-0136
Cardwell, DA., Hari Babu, N., Kambara, M., Shi, YH., Tarrant, CD. and Schneider, KR. (2003) 'Improved-trapped magnetic fields in top seeded melt grown YBCO superconductor doped with depleted and enriched uranium oxide'.4th International Conference on Processing and Manufacturing of Advanced Materials. UNIV CARLOS III MADRID, MADRID, SPAIN. 1 - 11 July. Trans Tech Publications, Ltd.. pp. 3499 - 3504. ISSN: 0255-5476
Eskin, D. and Katgerman, L. (2003) 'Hardening, Annealing, and Aging', in Totten, GE. and Mackenzie, DS. (eds.) Handbook of Aluminum. New York : Marcel Dekker. , 1. pp. 259 - 303. ISBN 10: 0-8247-0494-0.
M'Hamdi, M., Pilipenko, A. and Eskin, DG. (2003) 'Experimental and numerical study of contraction during solidification of aluminium alloys'. AFS Transactions, 111. pp. 333 - 340.
Waite, AM., Lloyd, NS., Ashburn, P., Evans, AGR., Ernst, T., Achard, H., et al. (2003) 'Raised source/drain (RSD) for 50nm MOSFETs - Effect of epitaxy layer thickness on short channel effects'.ESSDERC 2003. 33rd European Solid-State Device Research - ESSDERC '03. IEEE. pp. 223 - 226. ISSN: 1930-8876
Bischoff, MMJ., Fang, CM., De Groot, RA., Heijnen, GMM., Katsnelson, MI., Kolesnychenko, OY., et al. (2003) 'Scanning Tunneling Spectroscopy Study of Surface States of 3d Metals: Chemical Identification, Magnetic Contrast and Orbital Kondo Resonance States'. Acta Physica Polonica A, 104 (3-4). pp. 231 - 243. ISSN: 0587-4246
Rappaz, M., Jacot, A. and Boettinger, WJ. (2003) 'Last-stage solidification of alloys: Theoretical model of dendrite-arm and grain coalescence'. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 34 A (3). pp. 467 - 479. ISSN: 1073-5623
Men, H. and Kim, DH. (2003) 'Fabrication of ternary Mg-Cu-Gd bulk metallic glass with high glass-forming ability under air atmosphere'. Journal of Materials Research, 18 (7). pp. 1502 - 1504. ISSN: 0884-2914
Men, H., Kim, WT. and Kim, DH. (2003) 'Effect of Titanium on Glass-forming Ability of Cu-Zr-Al Alloys'. Materials Transactions, 44 (8). pp. 1647 - 1650. ISSN: 1345-9678
Men, H., Kim, WT. and Kim, DH. (2003)
'Fabrication and Mechanical Properties of Mg
Zhou, X., Thompson, GE. and Scamans, GM. (2003) 'The influence of surface treatment on filiform corrosion resistance of painted aluminium alloy sheet'. Corrosion Science, 45 (8). pp. 1767 - 1777. ISSN: 0010-938X
Smit, MA., Hunter, JA., Sharman, JDB., Scamans, GM. and Sykes, JM. (2003) 'Effect of organic additives on the performance of titanium-based conversion coatings'. Corrosion Science, 45 (9). pp. 1903 - 1920. ISSN: 0010-938X
Wang, XY., Chang, ITH. and Aindow, M. (2002)
'Nucleation of the C40-to-C11
Afseth, A., Nordlien, JH., Scamans, GM. and Nisancioglu, K. (2002) 'Filiform corrosion of AA3005 aluminium analogue model alloys'. Corrosion Science, 44 (11). pp. 2543 - 2559. ISSN: 0010-938X
Ji, S. and Fan, Z. (2002) 'Solidification behavior of Sn-15 wt pct Pb alloy under a high shear rate and high intensity of turbulence during semisolid processing'. Metallurgical and Materials Transactions A, 33 (11). pp. 3511 - 3520. ISSN: 1073-5623
Rainforth, WM., Leonard, AJ., Perrin, C., Bedolla-Jacuinde, A., Wang, Y., Jones, H. and et al. (2002) 'High resolution observations of friction-induced oxide and its interaction with the worn surface'. Tribology International, 35 (11). pp. 731 - 748. ISSN: 0301-679X
Afseth, A., Nordlien, JH., Scamans, GM. and Nisancioglu, K. (2002) 'Filiform corrosion of binary aluminium model alloys'. Corrosion Science, 44 (11). pp. 2529 - 2542. ISSN: 0010-938X
Afseth, A., Nordlien, JH., Scamans, GM. and Nisancioglu, K. (2002) 'Effect of thermo-mechanical processing on filiform corrosion of aluminium alloy AA3005'. Corrosion Science, 44 (11). pp. 2491 - 2506. ISSN: 0010-938X
Das, A., Ji, S. and Fan, Z. (2002) 'Morphological development of solidification structures under forced fluid flow: A Monte-Carlo simulation'. Acta Materialia, 50 (18). pp. 4571 - 4585. ISSN: 1359-6454
Babu, NH., Kambara, M., Shi, Y-H., Cardwell, DA., Tarrant, CD. and Schneider, KR. (2002) 'Reply to `Comment on ``Processing and Microstructure of Single Grain U-Doped Y-Ba-Cu-O Superconductor'' ''. Superconductor Science and Technology, 15 (10). pp. 1476 - 1477. ISSN: 0953-2048
González, MT., Hari-Babu, N. and Cardwell, DA. (2002)
'Enhancement of J
Hari Babu, N., Kambara, M., Shi, YH., Cardwell, DA., Tarrant, CD. and Schneider, KR. (2002) 'Comment on 'processing and microstructure of single grain uranium-doped Y-Ba-Cu-O superconductor''. Superconductor Science and Technology, 15 (10). pp. 1474 - 1475. ISSN: 0953-2048
Fang, CM., de Wijs, GA. and de Groot, RA. (2002) 'Spin‐Polarization in Half‐Metals.'. ChemInform, 33 (39). pp. 228 - 228. ISSN: 0931-7597
Fang, CM., Loong, CK., De Wijs, GA. and De With, G. (2002)
'Phonon spectrum of ZnAl
Ji, S., Fan, Z., Roberts, K. and Fang, X. (2002) 'Development of Twin-screw rheoextrusion process'.the 7th Intl Conf. on Semi-Solid Processing of Alloys and Composites. Tsukuba. 27 - 27 September. Proceeding the 7th Intl Conf. on Semi-Solid Processing of Alloys and Composites. pp. 677 - 682.
Ji, S., Fan, Z., Liu, G., Fang, X. and Song, S. (2002) 'Twin-screw rheomoulding of AZ91D Mg-alloys'.7th International Conference. on Semi-Solid Processing of Alloys and Composites. Tsukuba, Japan. 22 - 27 September. Proceedings of the 7th Intl Conf. on Semi-Solid Processing of Alloys and Composites. pp. 683 - 688.Open Access Link
Das, A., Ji, S. and Fan, Z. (2002) 'Solidification microstructures obtained by a novel twin-screw liquidus casting method'.the 7th Intl Conf. on Semi-Solid Processing of Alloys and Composites. Tsukuba, Japan. 20 - 27 September. Proc. the 7th Intl Conf. on Semi-Solid Processing of Alloys and Composites. pp. 689 - 694.Open Access Link
Eskin, GI. and Eskin, DG. (2002) 'Production of natural and synthesized aluminum-based composite materials with the aid of ultrasonic (cavitation) treatment of the melt'.8th Conference of the European-Society-of-Sonochemistry. VILLASIMIUS, ITALY. 14 - 19 September. ELSEVIER SCIENCE BV. pp. 297 - 301. ISSN: 1350-4177
Jacot, A. and Rappaz, M. (2002) 'Erratum: A pseudo-front tracking technique for the modelling of solidification microstructures in multi-component alloys (Acta Materialia (2002) 50:8 (1909-1926))'. Acta Materialia, 50 (15). pp. 3971. ISSN: 1359-6454
Wang, XY., Chang, ITH. and Aindow, M. (2002)
'A transmission electron microscope study of microstructural development in magnetron-sputtered MoSi
Prima, F., Tomut, M., Stone, I., Cantor, B., Janickovic, D., Vlasak, G. and et al. (2002) 'In situ resistometric investigation of phase transformations in rapidly solidified Al-based alloys containing dispersed nanoscale particles'. Materials Science and Engineering A, 375-377 (1-2 SPEC. ISS.). pp. 772 - 775. ISSN: 0921-5093
Galano, M., Audebert, F., Cantor, B. and Stone, I. (2002) 'Structural characterisation and stability of new nanoquasicrystalline Al-based alloys'. Materials Science and Engineering A, 375-377 (1-2 SPEC. ISS.). pp. 1206 - 1211. ISSN: 0921-5093