Maier, P., Mendis, C., Tober, G. and Hort, N. (2013) 'Tailoring properties of cast Mg10Gd by alloying Nd and heat treatment'. Emerging Materials Research, 2 (5). pp. 229 - 238. ISSN: 2046-0147

Rougier, L., Jacot, A., Gandin, CA., Napoli, PD., Théry, PY., Ponsen, D. and Jaquet, V. et al. (2013) 'Numerical simulation of precipitation in multicomponent Ni-base alloys'. Acta Materialia, 61 (17). pp. 6396 - 6405. ISSN: 1359-6454

Yamanoglu, R., Karakulak, E., Zeren, M. and Koç, FG. (2013) 'Effect of nickel on microstructure and wear behaviour of pure aluminium against steel and alumina counterfaces'. International Journal of Cast Metals Research, 26 (5). pp. 289 - 295. ISSN: 1364-0461

Cassell, A., Thompson, GE., Zhou, X., Afseth, A., Dunlop, H., Kulas, MA., Peguet, L. and Scamans, G. et al. (2013) 'Microstructure and corrosion behaviour of low copper 7xxx aluminium alloy'. Wiley. pp. 1604 - 1609. ISSN: 0142-2421

Cheng, WL., Wang, M., Que, ZP., Xu, CX., Zhang, JS., Liang, W., You, BS. and Park, SS. et al. (2013) 'Microstructure and mechanical properties of high speed indirect-extruded Mg-5Sn-(1,2,4 )Zn alloys'. Journal of Central South University, 20 (10). pp. 2643 - 2649. ISSN: 2095-2899

Ji, S., Fan, Z., Yang, W. and Jiang, B. (2013) 'Improvement of mechanical properties of HPDC A356 alloy through melt quenching process.'.Proceedings of the 2013 International Symposium on Liquid Metal Processing. Austin, USA. 20 - 25 September. Springer International Publishing. pp. 273 - 276.Open Access Link

Raabe, D., Sandlöbes, S., Millán, J., Ponge, D., Assadi, H., Herbig, M. and Choi, PP. et al. (2013) 'Segregation engineering enables nanoscale martensite to austenite phase transformation at grain boundaries: A pathway to ductile martensite'. Acta Materialia, 61 (16). pp. 6132 - 6152. ISSN: 1359-6454

Fidan, S., Avcu, E., Karakulak, E., Yamanoglu, R., Zeren, M. and Sinmazcelik, T. (2013) 'Effect of heat treatment on erosive wear behaviour of Ti6Al4V alloy'. Materials Science and Technology (United Kingdom), 29 (9). pp. 1088 - 1094. ISSN: 0267-0836

Li, D., Zhang, J., Que, Z., Xu, C. and Niu, X. (2013) 'Effects of Mn on the microstructure and mechanical properties of long period stacking ordered Mg95Zn2.5Y2.5 alloy'. Materials Letters, 109. pp. 46 - 50. ISSN: 0167-577X

Gao, T., Zhu, X., Sun, Q. and Liu, X. (2013) 'Morphological evolution of ZrAlSi phase and its impact on the elevated-temperature properties of Al-Si piston alloy'. Journal of Alloys and Compounds, 567. pp. 82 - 88. ISSN: 0925-8388

Lázaro, J., Laguna-Gutiérrez, E., Solórzano, E. and Rodríguez-Pérez, MA. (2013) 'Effect of microstructural anisotropy of PM precursors on the characteristic expansion of aluminum foams'. Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science, 44 (4). pp. 984 - 991. ISSN: 1073-5615

Que, Z., Lee, J., Cheng, W., Han, S., Jung, H. and Euh, K. (2013) 'Microstructure evolution of the Cu-Cr hypereutectic alloys during directional solidification'. Springer Netherlands. pp. 939 - 947. ISSN: 1876-1100

Niu, X., Que, Z. and Cheng, W. (2013) 'A new algorithm for solving the energy conservation equation based on ADI method'. Springer Netherlands. pp. 671 - 677. ISSN: 1876-1100

Jabbareh, MA. and Assadi, H. (2013) 'Modeling of grain structure and heat-affected zone in laser surface melting process'. Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science, 44 (4). pp. 1041 - 1048. ISSN: 1073-5615

Böttger, B., Apel, M., Santillana, B. and Eskin, DG. (2013) 'Relationship between solidification microstructure and hot cracking susceptibility for continuous casting of low-carbon and high-strength low-alloyed steels: A phase-field study'. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 44 (8). pp. 3765 - 3777. ISSN: 1073-5623 Open Access Link

Raabe, D., Ponge, D., Kirchheim, R., Assadi, H., Li, Y., Goto, S., Kostka, A., Herbig, M., Sandl, S., Kuzmina, M., Millán, J., Yuan, L. and Choi, PP. et al. (2013) 'Interface Segregation in Advanced Steels Studied at the Atomic Scale', inMicrostructural Design of Advanced Engineering Materials. Wiley. pp. 267 - 298. ISBN 13: 9783527332694.

Alidokht, SA., Abdollah-zadeh, A. and Assadi, H. (2013) 'Effect of applied load on the dry sliding wear behaviour and the subsurface deformation on hybrid metal matrix composite'. Wear, 305 (1-2). pp. 291 - 298. ISSN: 0043-1648

Cassinath, Z., Xia, M., Huang, Y. and Fan, Z. (2013) 'Process optimization and microstructure control for twin screw rheo-extrusion of an AZ91D magnesium alloy'.International Conference on Light Metal Technology. Old Windsor, UK. 24 - 26 July.

Bhattacharjee, T., Mendis, CL., Oh-ishi, K., Ohkubo, T. and Hono, K. (2013) 'The effect of Ag and Ca additions on the age hardening response of Mg-Zn alloys'. Materials Science and Engineering: A, 575. pp. 231 - 240. ISSN: 0921-5093

Huang, Y. (2013) 'Characteristics of steady state deformation of an Al-0.1 Mg alloy at low temperatures'. Journal of Materials Science, 48 (13). pp. 4484 - 4491. ISSN: 0022-2461

Stone, I. (2013) 'Light Metals Technology 2013'. Durnten-Zurich, Switzerland: TransTech Publications Ltd. ISSN 13: 978-3-03785-766-3

Karakulak, E., Zeren, M. and Yamanoǧlu, R. (2013) 'Effect of heat treatment conditions on microstructure and wear behaviour of Al4Cu2Ni2Mg alloy'. Transactions of Nonferrous Metals Society of China (English Edition), 23 (7). pp. 1898 - 1904. ISSN: 1003-6326

Lázaro, J., Solórzano, E., De Saja, JA. and Rodríguez-Pérez, MA. (2013) 'Early anisotropic expansion of aluminium foam precursors'. Journal of Materials Science, 48 (14). pp. 5036 - 5046. ISSN: 0022-2461

Cheng, WL., Li, JW., Que, ZP., Zhang, JS., Xu, CX., Liang, W., You, BS. and Park, SS. et al. (2013) 'Microstructure, texture and tensile properties of Mg-10Sn alloys extruded in different conditions'. Journal of Central South University, 20 (7). pp. 1786 - 1791. ISSN: 2095-2899

Grandfield, J., Eskin, DG. and Bainbridge, I. (2013) 'Direct-Chill Casting of Light Alloys'. John Wiley & Sons. ISSN 10: 1118716582 ISSN 13: 9781118716588

Huang, Y. and Xia, M. (2013) 'Biodegradable Mg-Zn-TCP nanocomposites fabricated by high shear solidification and ECAE'.UK Society of Biomaterials Annual Conf 13th Annual Conference. Birmingham, UK. 24 - 25 June. UKSB. pp. 36 - 36.

Hassani, A., Habibolahzadeh, A., Javadi, AH. and Hosseini, SM. (2013) 'Effect of strain rate on stress corrosion cracking of 316L austenitic stainless steel in boiling MgCl2 environment'. Journal of Materials Engineering and Performance, 22 (6). pp. 1783 - 1789. ISSN: 1059-9495

Shi, Y., Durrell, JH., Dennis, AR., Zhang, Z., Zhai, W., Hari Babu, N. and Cardwell, DA. et al. (2013) 'A comparison of 0°-0° and 45°-45° bridge-seeded, YBCO single grains'. Journal of the American Ceramic Society, 96 (6). pp. 1757 - 1762. ISSN: 0002-7820

Georgescu, S., Voiculescu, AM., Matei, C., Secu, CE., Negrea, RF. and Secu, M. (2013) 'Ultraviolet and visible up-conversion luminescence of Er ³⁺/Yb³⁺ co-doped CaF2 nanocrystals in sol-gel derived glass-ceramics'. Journal of Luminescence, 143. pp. 150 - 156. ISSN: 0022-2313

Secu, M., Secu, CE., Sima, M., Negrea, RF., Bartha, C., Dinescu, M. and Damian, V. et al. (2013) 'Luminescent Eosin Y-SiO2 hybrid nano and microrods prepared by sol-gel template method'. Journal of Luminescence, 143. pp. 89 - 92. ISSN: 0022-2313

Huang, Y. (2013) 'Deformation behaviour and stability of nanocrystalline materials'.2nd Inter Congress on Advanced Materials (AM2013). Zhenjiang, China. 17 - 19 May.

Apostol, NG., Stoflea, LE., Lungu, GA., Chirila, C., Trupina, L., Negrea, RF., Ghica, C., Pintilie, L. and Teodorescu, CM. et al. (2013) 'Charge transfer and band bending at Au/Pb(Zr 0.2 Ti 0.8 )O 3 interfaces investigated by photoelectron spectroscopy'. Applied Surface Science, 273. pp. 415 - 425. ISSN: 0169-4332

Su, SS., Chang, ITH. and Kuo, WCH. (2013) 'Effects of processing conditions on the sintering response of hypereutectic Al-Si-Cu-Mg P/M alloys'. Materials Chemistry and Physics, 139 (2-3). pp. 775 - 782. ISSN: 0254-0584

Elsayed, FR., Sasaki, TT., Mendis, CL., Ohkubo, T. and Hono, K. (2013) 'Significant enhancement of the age-hardening response in Mg-10Sn-3Al-1Zn alloy by Na microalloying'. Scripta Materialia, 68 (10). pp. 797 - 800. ISSN: 1359-6462

Raghunathan, VK., Devey, M., Hawkins, S., Hails, L., Davis, SA., Mann, S., Chang, IT., Ingham, E., Malhas, A., Vaux, DJ., Lane, JD. and Case, CP. et al. (2013) 'Influence of particle size and reactive oxygen species on cobalt chrome nanoparticle-mediated genotoxicity'. Biomaterials, 34 (14). pp. 3559 - 3570. ISSN: 0142-9612

Hari Babu, N., Fan, Z. and Eskin, DG. (2013) 'Application of external fields to technology of metal-matrix composite materials'. TMS Annual Meeting. pp. 1037 - 1044.

Grecu, MN., MacOvei, D., Ghica, D., Logofatu, C., Valsan, S., Apostol, NG., Lungu, GA., Negrea, RF. and Piticescu, RR. et al. (2013) 'Co environment and magnetic defects in anatase CoxTi 1-xO2 nanopowders'. Applied Physics Letters, 102 (16). ISSN: 0003-6951

Grandfield, JF. (2013) 'Essential Readings in Light Metals'. Wiley. ISSN 13: 9781118635711

Mckay, BJ., Cizek, P., Schumacher, P. and O'Reilly, KAQ. (2013) 'Heterogeneous Nucleation of αAl-Ti in Al-Ni-Si Alloys', inEssential Readings in Light Metals. Wiley. , 3. pp. 375 - 380. ISBN 13: 9781118635711.

Grandfield, JF. and Eskin, DG. (2013) 'Preface'. Essential Readings in Light Metals, 3.

Eskin, DG., Atamanenko, TV., Zhang, L. and Katgerman, L. (2013) 'On the Mechanism of Grain Refinement by Ultrasonic Melt Treatment in the Presence of Transition Metals'. , 3. pp. 415 - 419.

Nadella, R., Eskin, D. and Katgerman, L. (2013) 'Effect of Grain Refining on Defect Formation in DC Cast Al-Zn-Mg-Cu Alloy Billet', inEssential Readings in Light Metals. Wiley. , 3. pp. 842 - 847. ISBN 13: 9781118635711.

Jones, S., Prasada Rao, AK. and Fan, Z. (2013) 'Melt Conditioned Direct Chill (MC-DC) Casting of Al Alloys'. Transactions of the Indian Institute of Metals, 66 (2). pp. 117 - 121. ISSN: 0972-2815

Assadi, H. and Emmerich, H. (2013) 'Intelligent driving in traffic systems with partial lane discipline'. European Physical Journal B, 86 (4). ISSN: 1434-6028

Jafarzadegan, M., Abdollah-zadeh, A., Feng, AH., Saeid, T., Shen, J. and Assadi, H. (2013) 'Microstructure and Mechanical Properties of a Dissimilar Friction Stir Weld between Austenitic Stainless Steel and Low Carbon Steel'. Journal of Materials Science and Technology, 29 (4). pp. 367 - 372. ISSN: 1005-0302

Hou, LG., Yu, H., Cui, H., Cai, YH., Zhuang, LZ. and Zhang, JS. (2013) 'Extrusion, properties, and failure of spray-formed hypereutectic Al-Si alloys based on the optimization of fe-bearing phase'. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 44 (4). pp. 1814 - 1826. ISSN: 1073-5623

Wang, H., Zhang, J., Lu, L., Hou, L., Cui, H., Huang, J. and Zhang, J. et al. (2013) 'High-temperature thermal deformation and microstructure evolution of spray formed M4 high speed steel'. Cailiao Yanjiu Xuebao/Chinese Journal of Materials Research, 27 (2). pp. 167 - 172. ISSN: 1005-3093

Torun, E., Fang, CM., De Wijs, GA. and De Groot, RA. (2013) 'Role of magnetism in catalysis: RuO2 (110) surface'. Journal of Physical Chemistry C, 117 (12). pp. 6353 - 6357. ISSN: 1932-7447

Zhang, JS., Sun, Y., Cheng, WL., Que, ZP., Li, YM. and Liushan, L. (2013) 'The effect of Ca addition on microstructures and mechanical properties of Mg-RE based alloys'. Journal of Alloys and Compounds, 554. pp. 110 - 114. ISSN: 0925-8388

Babu, NH., Fan, Z. and Eskin, DG. (2013) 'Application of external fields to technology of metal-matrix composite materials'.TMS 2013 Annual Meeting. Henry B. Gonzalez Convention Center, San Antonio, Texas. 3 - 7 March. TMS/Wiley. pp. 1037 - 1044.

Ji, S., Yang, W., Gao, F., Watson, D. and Fan, Z. (2013) 'Effect of iron on the microstructure and mechanical property of Al-Mg-Si-Mn and Al-Mg-Si diecast alloys'. Materials Science and Engineering A, 564. pp. 130 - 139. ISSN: 0921-5093 Open Access Link