Tyurnina, A., Tzanakis, I., Morton, J., Mi, J., Porfyrakis, K., Maciejewska, BM., Grobert, N. and Eskin, DG. et al. (2020) 'Ultrasonic exfoliation of graphene in water: A key parameter study'. Carbon, 168. pp. 737 - 747. ISSN: 0008-6223 Open Access Link

Chang, I., Mendis, C., Zhongyun, F. and Qing, C. (2020) 'Effect of short T6 heat treatment on the microstructure and the mechanical properties of newly developed die-cast Al–Si–Mg–Mn alloys'. Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing, 788. pp. 139610 - 139610. ISSN: 0921-5093

Hamouda, W., Lubin, C., Ueda, S., Yamashita, Y., Renault, O., Mehmood, F., Mikolajick, T., Schroeder, U., Negrea, R. and Barrett, N. et al. (2020) 'Interface chemistry of pristine TiN/La: Hf 0.5Zr 0.5O2capacitors'. Applied Physics Letters, 116 (25). ISSN: 0003-6951

Al-Helal, K., Patel, J., Scamans, G. and Fan, Z. (2020) 'Melt conditioned direct chill (MC - DC) casting and extrusion of AA5754 Aluminium alloy formulated from recycled Taint Tabor scrap'. Materials, 13 (12). pp. 1 - 17. ISSN: 1996-1944 Open Access Link

Fan, Z., Gao, F., Jiang, B. and Que, Z. (2020) 'Impeding Nucleation for More Significant Grain Refinement'. Scientific Reports, 10 (1). pp. 1 - 11. ISSN: 2045-2322 Open Access Link

Nalivaiko, AY., Arnautov, AN., Zmanovsky, SV., Ozherelkov, DY., Shurkin, PK. and Gromov, AA. (2020) 'Al–Al2O3 powder composites obtained by hydrothermal oxidation method: Powders and sintered samples characterization'. Journal of Alloys and Compounds, 825. pp. 154024 - 154024. ISSN: 0925-8388

Nikhbakht, R., Saadati, M., Jahazi, M., Assadi, H. and Jodoin, B. (2020) 'EBSD Analysis Enhancement of Cold Sprayed Composite Materials: Sample Preparation , Annealing, and Scan Optimization'. [Poster] Exhibited at. Microscopical Society Symposium of Canada 2 6 2020

Shurkin, P., Akopyan, T., Korotkova, N., Prosviryakov, A., Bazlov, A., Komissarov, A. and Moskovskikh, D. et al. (2020) 'Microstructure and hardness evolution of Al8Zn7ni3mg alloy after casting at very different cooling rates'. Metals, 10 (6). pp. 762 - 762.

Chankitmunkong, S., Eskin, DG. and Limmaneevichitr, C. (2020) 'Structure refinement, mechanical properties and feasibility of deformation of hypereutectic Al-Fe-Zr and Al-Ni-Zr alloys subjected to ultrasonic melt processing'. Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing, 788. pp. 1 - 13. ISSN: 0921-5093 Open Access Link

Zhang, Y., Lordan, E., Dou, K., Wang, S. and Fan, Z. (2020) 'Influence of porosity characteristics on the variability in mechanical properties of high pressure die casting (HPDC) AlSi7MgMn alloys'. Journal of Manufacturing Processes, 56 (Part A). pp. 500 - 509. ISSN: 1526-6125 Open Access Link

Zhang, K., Zheng, J-H., Huang, Y., Pruncu, C. and Jiang, J. (2020) 'Evolution of twinning and shear bands in magnesium alloys during rolling at room and cryogenic temperature'. Materials and Design, 193 (August 2020). pp. 1 - 11. ISSN: 0264-1275 Open Access Link

Assadi, H. and Gärtner, F. (2020) 'Particle Compression Test: A Key Step towards Tailoring of Feedstock Powder for Cold Spraying'. Coatings, 10 (5). pp. 1 - 11.Open Access Link

Que, Z. and Mendis, CL. (2020) 'Heterogeneous nucleation and phase transformation of Fe-rich intermetallic compounds in Al–Mg–Si alloys'. Journal of Alloys and Compounds, 836. pp. 1 - 12. ISSN: 0925-8388 Open Access Link

Dhruv, PN., Meena, SS., Pullar, RC., Carvalho, FE., Jotania, RB., Bhatt, P., Prajapat, CL., Barros Machado, JP., Rao, TVC. and Basak, CB. et al. (2020) 'Investigation of structural, magnetic and dielectric properties of gallium substituted Z-type Sr3Co2-xGaxFe24O41 hexaferrites for microwave absorbers'. Journal of Alloys and Compounds, 822. pp. 153470 - 153470. ISSN: 0925-8388

Fang, C. and Fan, Z. (2020) 'Atomic ordering at the interfaces between liquid Al and solid MgO: An Ab Initio molecular dynamics study'. Philosophical Magazine Letters, 100 (5). pp. 235 - 244. ISSN: 0950-0839

Zuo, J., Hou, L., Shu, X., Peng, W., Yin, A. and Zhang, J. (2020) 'Grain refinement assisted by deformation enhanced precipitates through thermomechanical treatment of aa7055 al alloy'. Metals, 10 (5). pp. 594 - 594.

Chang, I., Luo, D., Al-Helal, K., Patel, JB., Huang, Y., Scamans, G. and Fan, Z. et al. (2020) 'Processing of recycled AA6111 aluminium alloy from two different feedstock of aluminium metal scraps'. Keikinzoku Yosetsu/Journal of Light Metal Welding, 58. pp. 29 - 32. ISSN: 0368-5306 Open Access Link

Silva Campos, MDR., Blawert, C., Mendis, CL., Mohedano, M., Zimmermann, T., Proefrock, D., Zheludkevich, ML. and Kainer, KU. et al. (2020) 'Effect of Heat Treatment on the Corrosion Behavior of Mg-10Gd Alloy in 0.5% NaCl Solution'. Frontiers in Materials, 7. ISSN: 2296-8016

Gupta, T., Chauhan, CC., Kagdi, AR., Meena, SS., Jotania, RB., Singh, C. and Basak, CB. et al. (2020) 'Investigation on structural, hysteresis, Mössbauer properties and electrical parameters of lightly Erbium substituted X-type Ba2Co2ErxFe28-xO46 hexaferrites'. Ceramics International, 46 (6). pp. 8209 - 8226. ISSN: 0272-8842

Wang, S., Wang, Y., Ramasse, Q. and Fan, Z. (2020) 'The Nature of Native MgO in Mg and Its Alloys'. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 51 (6). pp. 2957 - 2974. ISSN: 1073-5623 Open Access Link

Talluri, VSSLP., Tleuova, A., Hosseini, S. and Vopicka, O. (2020) 'Selective separation of 1-butanol from aqueous solution through pervaporation using PTSMP-silica nano hybrid membrane'. Membranes, 10 (4). pp. 55 - 55. ISSN: 2077-0375

Que, Z., Wang, Y. and Fan, Z. (2020) 'Heterogeneous Nucleation of Eutectic Structure in Al-Mg-Si Alloys'. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 51 (6). pp. 2697 - 2702. ISSN: 1073-5623 Open Access Link

Afifi, MA., Wang, YC. and Langdon, TG. (2020) 'Effect of dynamic plastic deformation on the microstructure and mechanical properties of an Al–Zn–Mg alloy'. Materials Science and Engineering A, 784. pp. 1 - x. ISSN: 0921-5093 Open Access Link

Saeedipour, S., Kermanpur, A. and Sadeghi, F. (2020) 'Effect of N addition on microstructure refinement and high temperature mechanical properties of Ti–46Al–8Ta (at. %) intermetallic alloy'. Journal of Alloys and Compounds, 817. pp. 152749 - 152749. ISSN: 0925-8388

Souissi, M., Sluiter, MHF., Matsunaga, T., Tabuchi, M., Mills, MJ. and Sahara, R. (2020) 'Direct observation and modeling of growth-induced stacking fault in chromium-rich γ-M23C6 carbides'. Scripta Materialia, 178. pp. 290 - 294. ISSN: 1359-6462

Zeng, G., Shuai, SS., Zhu, XZ., Ji, SX., Xian, JW. and Gourlay, CM. (2020) 'Al8Mn5 in High-Pressure Die Cast AZ91: Twinning, Morphology and Size Distributions'. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 51 (5). pp. 2523 - 2535. ISSN: 1073-5623 Open Access Link

Fang, C., Mohammodi, V., Nihtianov, S. and Sluiter, M. (2020) 'Stability, geometry and electronic properties of BH_n (n = 0 to 3) radicals on the Si{0 0 1}3×1:H surface from first-principles'. Journal of Physics: Condensed Matter, 32 (23). pp. 1 - 10. ISSN: 0953-8984 Open Access Link

Uka, J., Minton, T., McKay, B., Lewis, R. and Anguilano, L. (2020) 'Methods to Re-Use and Recycle Aluminium Machining Swarf'. Evolutions in Mechanical Engineering, 3 (2). pp. 1 - 4. ISSN: 2640-9690 Open Access Link

Rezvani, A., Bagherpour, E. and Ebrahimi, R. (2020) 'Circular Simple Shear Extrusion as an Alternative to Simple Shear Extrusion Technique'. Iranian Journal of Science and Technology - Transactions of Mechanical Engineering, 44 (1). pp. 193 - 201. ISSN: 2228-6187

Shurkin, PK., Belov, NA., Musin, AF. and Aksenov, AA. (2020) 'Novel High-Strength Casting Al−Zn−Mg−Ca−Fe Aluminum Alloy without Heat Treatment'. Russian Journal of Non-Ferrous Metals, 61 (2). pp. 179 - 187. ISSN: 1067-8212

Luan, Q. and Jiang, J. (Accepted) 'How Would the Deformation Bands Affect Recrystallization in Pure Aluminium?'. SSRN Electronic Journal.

Zhou, M., Cardoso, RP., Bahai, H. and Usmani, A. (2020) 'A thermo-mechanical analysis of stainless steel structures in fire'. Engineering Structures, 210 (1). pp. 1 - 19. ISSN: 0141-0296 Open Access Link

Subroto, T., Eskin, DG., Beckwith, C., Tzanakis, I., Djambazov, G. and Pericleous, K. (2020) 'Improving Ultrasonic Melt Treatment Efficiency Through Flow Management: Acoustic Pressure Measurements and Numerical Simulations'.149th TMS Annual Meeting and Exhibition: Light Metals 2020 Symposium. San Diego, CA, USA. 23 - 27 February. Springer International Publishing. pp. 981 - 987. ISSN: 2367-1181

Venditti, S., Eskin, D. and Jacot, A. (2020) 'Fractional Solidification for Purification of Recycled Aluminium Alloys'.149th TMS Annual Meeting and Exhibition: Light Metals Symposium 2020. San Diego, CA, USA. 23 - 27 February. Springer International Publishing. pp. 1110 - 1118. ISSN: 2367-1181

Razavi, M. and Huang, Y. (2020) 'Effect of hydroxyapatite (HA) nanoparticles shape on biodegradation of Mg/HA nanocomposites processed by high shear solidification/equal channel angular extrusion route'. Materials Letters, 267. pp. 1 - 6. ISSN: 0167-577X

Khan, MA., Wang, Y., Yasin, G., Nazeer, F., Malik, A., Ahmad, T., Khan, WQ., Nguyen, TA., Zhang, H. and Afifi, MA. et al. (2020) 'Adiabatic shear band localization in an Al–Zn–Mg–Cu alloy under high strain rate compression'. Journal of Materials Research and Technology, 9 (3). pp. 3977 - 3983. ISSN: 2238-7854 Open Access Link

Lordan, E., Lazaro Nebreda, J., Zhang, Y., Dou, K., Blake, P. and Fan, Z. (2020) 'On the relationship between internal porosity and the tensile ductility of aluminium alloy die-castings'. Materials Science and Engineering A, 778 (19 March 2020). pp. 1 - 10. ISSN: 0921-5093 Open Access Link

Pérez-Prado, MT., Bohlen, J., Yi, S., Letzig, D., Al-Samman, T., Robson, J., Barnett, M., Poole, W., Mendis, C., Agnew, S. and Stanford, N. et al. (2020) 'Emerging Hot Topics and Research Questions in Wrought Magnesium Alloy Development'. JOM, 72 (7). pp. 1 - 1. ISSN: 1047-4838

Chankitmunkong, S., Eskin, D. and Limmaneevichitr, C. (2020) 'Structure modification upon ultrasonic processing of an AA4032 piston alloy: comparison of permanent mold and direct-chill casting'. Metallurgical and Materials Transactions A, 51A (February). pp. 818 - 821. ISSN: 1073-5623 Open Access Link

Shurkin, PK., Belov, NA., Musin, AF. and Samoshina, ME. (2020) 'Effect of Calcium and Silicon on the Character of Solidification and Strengthening of the Al–8% Zn–3% Mg Alloy'. Physics of Metals and Metallography, 121 (2). pp. 135 - 142. ISSN: 0031-918X

Priyadarshi, A., Subroto, T., Conte, M., Pericelous, K., Eskin, D., Prentice, P. and Tzanakis, I. et al. (2020) 'Nanoindentation and Cavitation-Induced Fragmentation Study of Primary Al3Zr Intermetallics Formed in Al Alloys'.Light Metals Symposium held at the 149th Annual Meeting and Exhibition, TMS 2020. San Diego; United States. 28 - 27 February. Springer International Publishing. pp. 168 - 173. ISSN: 2367-1181 Open Access Link

Zhu, X. and Ji, S. (2020) 'The Formation of Al6(Fe, Mn) Phase in Die-Cast Al–Mg Alloys'.TMS 2020. San Diego. 28 - 27 February. Springer International Publishing. pp. 297 - 300. ISSN: 2367-1181 Open Access Link

Huang, Y. (2020) 'Coarsening-Resistance of a Severely Deformed Al-0.2 wt% Sc Alloy'.Light Metals symposia at the TMS Annual Meeting & Exhibition. San Diego, California, USA. 28 - 27 February. Springer International Publishing. pp. 272 - 276. ISSN: 2367-1181

Liu, G., Blake, P. and Ji, S. (2020) 'High Cycle Fatigue Properties of the Zr-Modified Al–Si–Cu–Mg Alloy at Elevated Temperatures'.TMS 2020. San Diego, Cal., USA. 28 - 28 February. Springer International Publishing. pp. 253 - 260. ISSN: 2367-1181 Open Access Link

Ji, S. and Amirkhanlou, S. (2020) 'A review on high stiffness aluminium-based composites and bimetallics'. Critical Reviews in Solid State and Materials Sciences, 45 (1). pp. 1 - 12. ISSN: 1040-8436 Open Access Link

Dong, X., Nyberg, EA. and Ji, S. (2020) 'A Die-Cast Magnesium Alloy for Applications at Elevated Temperatures'.Magnesium Technology Symposium held during the 149th TMS Annual Meeting & Exhibition. San Diego, CA, USA. 23 - 27 February. Springer International Publishing. pp. 31 - 36. ISSN: 2367-1181 Open Access Link

Buzolin, RH., Volovitch, P., Maltseva, A., Lamaka, S., Blawert, C., Mendis, CL., Lohmüller, A., Kainer, KU. and Hort, N. et al. (2020) 'Thixomolded AZ91D and MRI153M magnesium alloys and their enhanced corrosion resistance'. Materials and Corrosion, 71 (3). pp. 339 - 351. ISSN: 0947-5117 Open Access Link

Niu, Z. and Cheng, K. (2020) 'Improved dynamic cutting force modelling in micro milling of metal matrix composites Part I: Theoretical model and simulations'. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 234 (9). pp. 1733 - 1745. ISSN: 0954-4062

Yang, X., Barekar, NS., Ji, S., Dhindaw, BK. and Fan, Z. (2020) 'Influence of reinforcing particle distribution on the casting characteristics of Al-SiCp composites'. Journal of Materials Processing Technology, 279. pp. 1 - 10. ISSN: 0924-0136 Open Access Link

Chankitmunkong, S., Eskin, D. and Limmaneevichitr, C. (2020) 'Constitutive behavior of an AA4032 piston alloy with Cu and Er additions upon high temperature compressive deformation'. Metallurgical and Materials Transactions A, 51A (January). pp. 467 - 481. ISSN: 1543-1940 Open Access Link

Shurkin, P., Akopyan, T., Prosviryakov, A., Komissarov, A. and Korotkova, N. (2020) 'Single track scanning experiment on the hypereutectic aluminium alloy Al-8%Zn-7%Ni-3%Mg'. MATEC Web of Conferences, 326. pp. 07001 - 07001. ISSN: 2261-236X