Fan, Z. and Miodownik, AP. (1996) 'Microstructural evolution in rapidly solidified Ti-7.5 Mn-0.5 B alloy'. Acta Materialia, 44 (1). pp. 93 - 110. ISSN: 1359-6454

Chang, ITH., Niu, F., Slimovici, D., Wildig, C., Leigh, PA., Dobson, PJ. and Cantor, B. et al. (1996) 'Manufacture and characterization of nanocomposite thin films of Si-SiO2 and Ag-Si'. Materials Science Forum, 225-227 (PART 1). pp. 175 - 178. ISSN: 0255-5476

Chang, ITH., Svec, P., Gogebakan, M. and Cantor, B. (1996) 'Rapidly solidified Al85Ni15-xYx(x=5,8,10) alloys'. Materials Science Forum, 225-227 (PART 1). pp. 335 - 340. ISSN: 0255-5476

Rappaz, M., Desbiolles, JL., Drezet, JM., Gandin, CA., Jacot, A. and Thevoz, P. (1995) 'Application of inverse methods to the estimation of boundary conditions and properties'.7th Conference on Modeling of Casting, Welding and Advanced Solidification Processes. LONDON, ENGLAND. 1 - 15 September. MINERALS, METALS & MATERIALS SOC. pp. 449 - 457.

Rappaz, M., Gandin, CA., Jacot, A. and Charbon, C. (1995) 'Modeling of microstructure formation'.7th Conference on Modeling of Casting, Welding and Advanced Solidification Processes. LONDON, ENGLAND. 1 - 15 September. MINERALS, METALS & MATERIALS SOC. pp. 501 - 516.

Chang, ITH., Balcers, O. and Cantor, B. (1995) 'Effect of added Mo on the crystallization behaviour of rapidly solidified Fe70Cr20B10 alloys'. International journal of rapid solidification, 9 (1). pp. 63 - 73. ISSN: 0265-0916

Ji, S. (Accepted) 'Punching and glazing machine for semi-finished pottery'.

FANG, CM., MEETSMA, A. and WIEGERS, GA. (1995) 'ChemInform Abstract: Crystal Structure of Erbium Sesquiselenide, Er2Se3.'. ChemInform, 26 (29). ISSN: 0931-7597

Ji, S. (Accepted) 'A height control valve for lost foam process'.Open Access Link

Ji, S., Gao, J. and Huang, C. (1995) 'Drilling and glazing machine for porcelain products'.

Gao, J., Ye, S., Ji, S. and Zhang, J. (1995) 'Centrifugal coating spraying device for casting'.

Zhang, J., Ji, S. and Yang, G. (1995) 'Charing pail'.

Fan, Z., Chandrasekaran, L., Ward-Close, CM. and Miodownik, AP. (1995) 'The effect of pre-consolidation heat treatment on TiB morphology and mechanical properties of rapidly solidified Ti-6Al-4V-XB alloys'. Scripta Metallurgica et Materiala, 32 (6). pp. 833 - 838. ISSN: 0956-716X

Gopalan, R., Roy, T., Rajasekharan, T., Rangarajan, G. and Hari Babu, N. (1995) 'Microstructural and magnetisation study in melt-grown YBaCuO samples'. Physica C: Superconductivity and its applications, 244 (1-2). pp. 106 - 114. ISSN: 0921-4534

Fang, CM., Meetsma, A. and Wiegers, GA. (1995) 'Crystal structure of erbium sesquiselenide, Er2Se3'. Journal of Alloys and Compounds, 218 (2). pp. 224 - 227. ISSN: 0925-8388

Gao, J., Ji, S., Zhang, J. and Yang, G. (1995) 'Development of a core-making machine with two working stations (in Chinese)'. China Foundry Machinery & Technology, 1995 (01). pp. 51 - 54. ISSN: 1006-9658

Fan, Z. (1995) 'The grain size dependence of ductile fracture toughness of polycrystalline metals and alloys'. Materials Science and Engineering A, 191 (1-2). pp. 73 - 83. ISSN: 0921-5093

Ji, S., Wan, L., Zhang, J. and Yang, G. (1995) 'A Microcomputer Control System for the Moulding Machine in Full Mould Process (in Chinese)'. Journal of Huazhong University of Science and Technology(Natural Science Edition), 23 (1995) (1). pp. 72 - 76. ISSN: 1671-4512

Ji, S., Zhang, J., Wan, L. and Zhang, Y. (1995) 'The design of 3-D vibrating compact table for the EPC process with dry sands (in Chinese)'. Journal of Huazhong University of Science and Technology(Natural Science Edition), 1995 (vol. 23, No 1). pp. 68 - 71. ISSN: 1671-4512

Ji, S., Wei, H., Zhang, J. and Yang, G. (1995) 'A CAD System for Patterns Design in Green Sand Technology (in Chinese)'. Journal of Huazhong University of Science and Technology(Natural Science Edition), 1995 (01). pp. 109 - 112. ISSN: 1671-4512

Ling, H., Dai, X., Wang, W. and JI, SHOUXUN. (1995) 'Study on the Technology of Anti-adhering Mould in No-bake Process (in Chinese)'. Rejiagong Gongyi/Hot Working Technology, 1995 (01). pp. 44 - 49. ISSN: 1001-3814

Ji, S. (Accepted) 'Compact punching die for highway shield plate'.Open Access Link

Stone, IC. and Tsakiropoulos, P. (1995) 'Characterisation of spatial distribution of reinforcement in powder metallurgy route Al/SiCp metal matrix composites'. Materials Science and Technology (United Kingdom), 11 (3). pp. 213 - 221. ISSN: 0267-0836

Hari Babu, N., Rajasekharan, T., Ravi, S. and Seshu Bai, V. (1995) 'Universal behavior of susceptibility in the 110 K phase of the Bi-Pb-Sr-Ca-Cu-O system'. Physical Review B, 52 (18). pp. 13605 - 13610. ISSN: 0163-1829

Stone, IC. and Tsakiropoulos, P. (1995) 'Spatial distribution of reinforcement in PM Al-4Cu/SiCp MMCs: Computer simulation and characterisation by EDX analysis'.Tenth International Conference on Composite Materials (ICCM/10). Whistler. Woodhead. pp. 465 - 472.

Chang, ITH. and Cantor, B. (1995) 'Temperature, composition and microstructure variations during pulsed laser irradiation of a deposited film on a substrate'. Acta Metallurgica Et Materialia, 43 (12). pp. 4411 - 4420. ISSN: 0956-7151

Fang, CM., Ettema, ARHF., Haas, C., Wiegers, GA., Van Leuken, H. and De Groot, RA. (1995) 'Electronic structure of the misfit-layer compound (SnS)1.17NbS2 deduced from band-structure calculations and photoelectron spectra'. Physical Review B, 52 (4). pp. 2336 - 2347. ISSN: 0163-1829

Rokhlin, LL., Kharakterova, ML., Eskin, D. and Dobatkina, TV. (1995) 'New aluminum alloys containing scandium'. Advanced Materials. pp. 139 - 146.

FAN, ZY. (1995) 'A NEW APPROACH TO THE ELECTRICAL-RESISTIVITY OF 2-PHASE COMPOSITES'. ACTA METALLURGICA ET MATERIALIA, 43 (1). pp. 43 - 49. ISSN: 0956-7151

Fan, Z., Miodownik, AP., Chandrasekaran, L. and Ward-Close, CM. (1995) 'Microstructural investigation of a rapidly solidified Ti-6Al-4V-1B-0.5Y alloy'. Journal of Materials Science, 30 (7). pp. 1653 - 1660. ISSN: 0022-2461

Fan, Z. (1995) 'A new approach to the electrical resistivity of two-phase composites'. Acta Metallurgica Et Materialia, 43 (1). pp. 43 - 49. ISSN: 0956-7151

Chang, ITH., Cantor, B., Leigh, PA. and Dobson, PJ. (1995) 'Fabrication of Si/SiO2 nanocomposite thin films'. Nanostructured Materials, 6 (5-8). pp. 835 - 838. ISSN: 0965-9773

Assadi, H., Barth, M., Greer, AL., Herlach, DM. and Adeva, P. (1995) 'Microstructural development in rapidly solidified Ni3Al droplets'. Materials Science Forum, 179-181. pp. 741 - 746. ISSN: 0255-5476

Assadi, H. and Greer, AL. (1995) 'Application of Disorder Trapping Theory to the Solidification of Ni3Al'. ISIJ International, 35 (6). pp. 574 - 579. ISSN: 0915-1559

Huang, Y. and Young, RJ. (1995) 'Interfacial behaviour in high temperature cured carbon fibre/epoxy resin model composite'. Composites, 26 (8). pp. 541 - 550. ISSN: 0010-4361

Huang, Y. and Young, RJ. (1995) 'Effect of fibre microstructure upon the modulus of PAN- and pitch-based carbon fibres'. Carbon, 33 (2). pp. 97 - 107. ISSN: 0008-6223

Eskin, DG. (1995) 'The effect of alloying additives on structure and properties of cast Al-Cu-Si-Mg alloys'. Zeitschrift fuer Metallkunde, 86 (1). pp. 60 - 63. ISSN: 0044-3093

Stone, IC. and Tsakiropoulos, P. (1994) 'The effect of the spatial distribution of reinforcement on the fabrication and heat treatment of (Al4wt.%Cu)SiC particle metal matrix composites'. Materials Science and Engineering A, 189 (1-2). pp. 285 - 290. ISSN: 0921-5093

Fan, Z. (1994) 'The β→ω transformation during room temperature aging in rapidly solidified Ti-6Al-4V alloy'. Scripta Metallurgica et Materiala, 31 (11). pp. 1519 - 1524. ISSN: 0956-716X

Scamans, GM., Creber, DK., Stannard, JH. and Tregenza, JE. (1994) 'Aluminum fuel cell power sources for long range unmanned underwater vehicles'. IEEE Sympsium on Autonomous Underwater Vehicle Technology. pp. 179 - 186.

Ji, S., Zhang, J., Wan, L. and Yang, G. (1994) 'New Method to Describe the Capability of Reclaimer in Resin Bonded Sand (in Chinese)'. Rejiagong Gongyi/Hot Working Technology, 1994 (06). pp. 26 - 30. ISSN: 1001-3814

Wang, Y., Lorimer, GW. and Sale, FR. (1994) 'Microstructural development during consolidation of rapidly solidified AlFeVSi powder by VHP, extrusion and rolling'. Scripta Metallurgica et Materiala, 31 (10). pp. 1337 - 1342. ISSN: 0956-716X

Ma, W., Ji, S., Zhang, J. and Yang, G. (1994) 'Design consideration for production line using full mould casting (in Chinese)'. China Foundry Equipment and Technology, 1994 (5). pp. 48 - 53. ISSN: 1006-9658

HAICHUNGAO., YANHUO., CHANGMINGFANG., CHANGMINSUN. and YIZHANG. (1994) 'Ionic conduction in oxysulfide glasses for the Li2SB2O3 (LiBr) systems'. Solid State Ionics, 73 (1-2). pp. 99 - 103. ISSN: 0167-2738

Chang, ITH., Ishii, K. and Cantor, B. (1994) 'Heat treatment of rapidly solidified Fe-Cr-Zr-B alloys'. Journal of Thermal Analysis, 42 (4). pp. 667 - 678. ISSN: 0368-4466

Ji, S., Zhang, J., Ma, W., Yang, G. and Wang, W. (1994) 'Phenolic/Ester Cold-set process (in Chinese)'. China Foundry Machinery and Technology, 1994 (04). pp. 09 - 14. ISSN: 1006-9658

Ji, S., Zhang, J., Ma, W. and Yang, G. (1994) 'Moulding Technology in Full Mould Casting (in Chinese)'. China Foundry Equipment and Technology, 1994 (4). pp. 50 - 55. ISSN: 1006-9658

Ma, W., Zhang, J., Ji, S., Gao, J. and Yang, G. (1994) 'An experimental study on several new type sand mixing mechanisms (in Chinese)'. China Foundry Machinery and Technology, 1994 (04). pp. 34 - 39. ISSN: 1006-9658

Fan, Z. and Tsakiropoulos, P. (1994) 'On the mean internal stresses in two-ductile-phase alloys'. Materials Science and Engineering A, 184 (1). pp. 57 - 64. ISSN: 0921-5093

Huang, Z., Huang, C., Ji, S. and Gao, J. (1994) 'A die structure for making motorway safety plate'.