Wang, Y., Lebon, B., Tzanakis, I., Zhao, Y., Wang, K., Stella, J., Poirier, T., Darut, G., Liao, H. and Planche, M-P. et al. (2018) 'Experimental and numerical investigation of cavitation-induced erosion in thermal sprayed single splats'. Ultrasonics Sonochemistry, 52. pp. 336 - 343. ISSN: 1350-4177 Open Access Link

Khrustalev, A., Vorozhtsov, A., Kazantseva, L., Promakhov, V., Kalashnikov, M., Eskin, D. and Kurzina, I. et al. (2018) 'Influence of scandium fluoride on the structure and phase composition of Al-Si alloy'.XIV International Workshop High Energy and Special Materials: Demilitarization, Antiterrorism and Civil Application (HEMs-2018). Tomsk, Russia. 5 - 5 September. EDP Sciences. pp. 1 - 5. ISSN: 2261-236X Open Access Link

Vlaicu, ID., Maraloiu, AV., Ghica, D., Mercioniu, IF., Stefan, M., Vlaicu, AM., Negrea, RF., Kuncser, AC., Bulat, S., MacEk Krzmanc, M., Ciobanu, R. and Plopa, O. et al. (2018) 'Limits and Particularities of the Synthesis of Ba 1-x Ca x TiO 3 for Piezoelectric Applications, by Topochemical Conversion from Molten Salt Solutions'.2018 International Conference and Exposition on Electrical And Power Engineering (EPE). IEEE. pp. 1047 - 1050.

Souissi, M., Sluiter, MHF., Matsunaga, T., Tabuchi, M., Mills, MJ. and Sahara, R. (2018) 'Effect of mixed partial occupation of metal sites on the phase stability of γ-Cr23- x Fe x C6 (x = 0-3) carbides'. Scientific Reports, 8 (1). pp. 7279. ISSN: 2045-2322

Colbea, C., Avram, D., Cojocaru, B., Negrea, R., Ghica, C., Kessler, VG., Seisenbaeva, GA., Parvulescu, V. and Tiseanu, C. et al. (2018) 'Full tetragonal phase stabilization in ZrO2 nanoparticles using wet impregnation: Interplay of host structure, dopant concentration and sensitivity of characterization technique'. Nanomaterials, 8 (12). pp. 988 - 988. ISSN: 2079-4991

Haydous, F., Scarisoreanu, ND., Birjega, R., Ion, V., Lippert, T., Dumitrescu, N., Moldovan, A., Andrei, A., Teodorescu, VS., Ghica, C., Negrea, R. and Dinescu, M. et al. (2018) 'Rolling dopant and strain in Y-doped BiFeO3 epitaxial thin films for photoelectrochemical water splitting'. Scientific Reports, 8 (1). pp. 15826. ISSN: 2045-2322

Sadeghi, F., Kermanpur, A. and Norouzi, E. (2018) 'Optimizing Grain Selection Design in the Single-Crystal Solidification of Ni-Based Superalloys'. Crystal Research and Technology, 53 (12). ISSN: 0232-1300

Das, A. and Basak, CB. (2018) 'Fracture mechanisms of spinodal alloys'. Philosophical Magazine, 98 (33). pp. 3007 - 3033. ISSN: 1478-6435

Liu, L., Zhang, T., Liu, Z., Yu, C., Dong, X., He, L., Gao, K., Zhu, X., Li, W., Wang, C., Li, P., Zhang, L. and Li, L. et al. (2018) 'Near-Net Forming Complex Shaped Zr-Based Bulk Metallic Glasses by High Pressure Die Casting.'. Materials (Basel, Switzerland), 11 (11). pp. 1 - 12. ISSN: 1996-1944 Open Access Link

Katgerman, L. and Eskin, D. (2018) 'Hardening, Annealing, and Aging', in Totten, GE., Tiryakioglu, M. and Kessler, O. (eds.) Encyclopedia of Aluminum and Its Alloys. CRC Press. , 1. pp. 1123 - 1148. ISBN 10: 9781466510.

Zhang, Y., Amirkhanlou, S. and Ji, S. (2018) 'Reinforcement of TiB2 Nanoparticles in Aluminium Piston Alloys for High Performance at Elevated Temperature'. Nanomanufacturing and Metrology, 1 (4). pp. 248 - 251. ISSN: 2520-811X Open Access Link

Afifi, MA., Wang, YC., Pereira, PHR., Huang, Y., Wang, Y., Cheng, X., Li, S. and Langdon, TG. et al. (2018) 'Mechanical properties of an Al-Zn-Mg alloy processed by ECAP and heat treatments'. Journal of Alloys and Compounds, 769. pp. 631 - 639. ISSN: 0925-8388

Visinescu, D., Hussien, MD., Moreno, JC., Negrea, R., Birjega, R., Somacescu, S., Ene, CD., Chifiriuc, MC., Popa, M., Stan, MS. and Carp, O. et al. (2018) 'Zinc Oxide Spherical-Shaped Nanostructures: Investigation of Surface Reactivity and Interactions with Microbial and Mammalian Cells'. Langmuir, 34 (45). pp. 13638 - 13651. ISSN: 0743-7463

Assadi, H., Gaertner, F., Klassen, T. and Kreye, H. (2018) 'Comment on ‘Adiabatic shear instability is not necessary for adhesion in cold spray’'. Scripta Materialia, 162. pp. 512 - 514. ISSN: 1359-6462 Open Access Link

Hajipour, H., Abdollah-zadeh, A., Assadi, H., Taheri-Nassaj, E. and Jahed, H. (2018) 'Effect of Feedstock Powder Morphology on Cold-Sprayed Titanium Dioxide Coatings'. Journal of Thermal Spray Technology, 27 (8). pp. 1542 - 1550. ISSN: 1544-1016 Open Access Link

Al-Helal, K., Patel, J. and Fan, Z. (2018) 'Melt Conditioning Twin Roll Casting with Thermo-Mechanical Treatment of Recycled AA6111 Alloy'. JOM, 71 (5). pp. 1714 - 1721. ISSN: 1047-4838 Open Access Link

Al-Helal, K., Chang, I., Patel, JB. and Fan, Z. (2018) 'Thermomechanical Treatment of High-Shear Melt-Conditioned Twin-Roll Cast Strip of Recycled AA5754 Alloy'. JOM, 71 (6). pp. 2018 - 2024. ISSN: 1047-4838 Open Access Link

Wang, Y., Fang, C., Zhou, L., Hashimoto, T., Zhou, X., Ramasse, QM. and Fan, Z. et al. (2018) 'Mechanism for Zr poisoning of Al-Ti-B based grain refiners'. Acta Materialia, 164 (1 February 2019). pp. 428 - 439. ISSN: 1359-6454 Open Access Link

Sree Manu, KM., Manoj, V., Arsha, AG., Vishnu, RL., Resmi, VG., Rajan, TPD. and Pai, BC. et al. (2018) 'Selectively Reinforced Aluminum Metallic Hybrid Composites by Liquid Metal Squeeze Infiltration Process'. Transactions of the Indian Institute of Metals, 71 (11). pp. 2827 - 2832. ISSN: 0972-2815

Lozhkomoev, AS., Lerner, MI., Pervikov, AV., Naidenkin, EV., Mishin, IP., Vorozhtsov, AB., Apkarian, AS. and Eskin, D. et al. (2018) 'The formation of Fe-Cu composite based on bimetallic nanoparticles'. Vacuum, 159. pp. 441 - 446. ISSN: 0042-207X Open Access Link

Dong, X., Zhu, X. and Ji, S. (2018) 'Effect of super vacuum assisted high pressure die casting on the repeatability of mechanical properties of Al-Si-Mg-Mn die-cast alloys'. Journal of Materials Processing Technology, 266. pp. 105 - 113. ISSN: 0924-0136 Open Access Link

Reihanian, M., Bagherpour, E., Pardis, N., Ebrahimi, R. and Tsuji, N. (2018) 'Ten Years of Severe Plastic Deformation (SPD) in Iran, Part II: Accumulative Roll Bonding (ARB)'. Iranian Journal of Materials Forming, 5 (2). pp. 1 - 25.Open Access Link

Ma, H., He, Z., Hou, L. and Steurer, W. (2018) 'Exceptionally large areas of local tenfold symmetry in decagonal Al59Cr21Fe10Si10'. Journal of Alloys and Compounds, 765. pp. 753 - 756. ISSN: 0925-8388

Huang, Y., Li, J. and Zhou, L. (2018) 'Mg–3Zn–0.5Zr/HA nanocomposites fabricated by high shear solidification and equal channel angular extrusion'. Materials Science and Technology (United Kingdom), 34 (15). pp. 1868 - 1879. ISSN: 0267-0836

Lordan, E., Lazaro Nebreda, J., Zhang, Y. and Fan, Z. (2018) 'Effective Degassing for Reduced Variability in High-Pressure Die Casting Performance'. JOM, 71 (2). pp. 824 - 830. ISSN: 1047-4838 Open Access Link

Bagherpour, E., Pardis, N., Reihanian, M. and Ebrahimi, R. (2018) 'An overview on severe plastic deformation: research status, techniques classification, microstructure evolution, and applications'. International Journal of Advanced Manufacturing Technology, 100 (5-8). pp. 1647 - 1694. ISSN: 0268-3768 Open Access Link

Huang, X., Dong, X., Liu, L. and Li, P. (2018) 'Liquid structure of Al-Si alloy: A molecular dynamics simulation'. Journal of Non-Crystalline Solids, 503-504. pp. 182 - 185. ISSN: 0022-3093

Miranda, A., Barekar, N. and McKay, B. (2018) 'MWCNTs and its use in Al-MMCs for Ultra-High Thermal Conductivity Applications: A Review'. Journal of Alloys and Compounds, 774. pp. 820 - 840. ISSN: 1873-4669

Anguilano, L., McKay, B., Minton, T., Barekar, N. and Adole, O. (Accepted) 'Method for Forming Metal Matrix Composites'.

Fang, CM., Men, H. and Fan, Z. (2018) 'Effect of Substrate Chemistry on Prenucleation'. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 49 (12). pp. 6231 - 6242. ISSN: 1073-5623 Open Access Link

Wang, J., Andrews, P., Butler, C., McAlpine, E., Scamans, G. and Zhou, X. (2018) 'Optical cleanliness measurement methods for aluminium sheet surfaces'. Surface and Interface Analysis, 51 (12). pp. 1144 - 1153. ISSN: 0142-2421 Open Access Link

Ma, C., Hou, L., Zhang, J. and Zhuang, L. (2018) 'Microstructure evolution and mechanical properties of 7050 aluminum alloy rolled by asymmetric rolling with differential speed ratios'. Cailiao Rechuli Xuebao/Transactions of Materials and Heat Treatment, 39 (9). pp. 7 - 14. ISSN: 1009-6264

Dong, X., Yang, H., Zhu, X. and Ji, S. (2018) 'High strength and ductility aluminium alloy processed by high pressure die casting'. Journal of Alloys and Compounds, 773. pp. 86 - 96. ISSN: 0925-8388 Open Access Link

Calahorra, Y., Datta, A., Famelton, J., Kam, D., Shoseyov, O. and Kar-Narayan, S. (2018) 'Nanoscale electromechanical properties of template-assisted hierarchical self-assembled cellulose nanofibers'. Nanoscale, 10 (35). pp. 16812 - 16821. ISSN: 2040-3364

Eskin, D. and Tzanakis, I. (2018) 'High frequency vibration and ultrasonic processing', in Eskin, D. and Mi, J. (eds.) Solidification Processing of Metallic Alloys Under External Fields. Springer. pp. 153 - 193. ISBN 10: 3319948415.

Dahlborg, U., Calvo-Dahlborg, M., Eskin, D. and Popel, P. (2018) 'Thermal melt processing of metallic alloys', in Eskin, D. and Mi, J. (eds.) Solidification Processing of Metallic Alloys Under External Fields. Springer. pp. 277 - 315. ISBN 10: 3319948415.

Eskin, D. (2018) 'Basics of solidification processing of metallic alloys', in Eskin, D. and Mi, J. (eds.) Solidification Processing of Metallic Alloys Under External Fields. Springer. pp. 1 - 17. ISBN 10: 3319948415. ISBN 13: 9783319948416.

Eskin, DG. and Mi, J. (2018) 'Solidification Processing of Metallic Alloys Under External Fields'. Springer. ISSN 10: 3319948415 ISSN 13: 9783319948416

Karakulak, E. and Küçüker, YB. (2018) 'Effect of Si addition on microstructure and wear properties of Mg-Sn as-cast alloys'. Journal of Magnesium and Alloys, 6 (4). pp. 384 - 389. ISSN: 2213-9567 Open Access Link

Zohreh, N., Hosseini, SH., Tavakolizadeh, M., Busuioc, C. and Negrea, R. (2018) 'Palladium pincer complex incorporation onto the Fe3O4-entrapped cross-linked multilayered polymer as a high loaded nanocatalyst for oxidation'. Journal of Molecular Liquids, 266. pp. 393 - 404. ISSN: 0167-7322

Bhagurkar, AG., Yamamoto, A., Wang, L., Xia, M., Dennis, AR., Durrell, JH., Aljohani, TA., Hari Babu, N. and Cardwell, DA. et al. (2018) 'High Trapped Fields in C-doped MgB2 Bulk Superconductors Fabricated by Infiltration and Growth Process'. Scientific Reports, 8 (1). pp. 1 - 12. ISSN: 2045-2322 Open Access Link

Wang, J., Yang, H., Liu, Z., Ji, S., Li, R. and Ruan, J. (2018) 'A novel Fe 40 Mn 40 Cr 10 Co 10 /SiC medium-entropy nanocomposite reinforced by the nanoparticles-woven architectural structures'. Journal of Alloys and Compounds, 772. pp. 272 - 279. ISSN: 0925-8388 Open Access Link

Scamans, G. (2018) 'Electric vehicles spike demand for high strength aluminum extrusions'. Light Metal Age, 76 (5). pp. 6 - 12. ISSN: 0024-3345

Ma, C., Hou, L., Zhang, J. and Zhuang, L. (2018) 'Effect of deformation routes on the microstructures and mechanical properties of the asymmetrical rolled 7050 Aluminum alloy plates'. Materials Science and Engineering: A, 733. pp. 307 - 315. ISSN: 0921-5093

Silva, JPB., Kamakshi, K., Negrea, RF., Ghica, C., Wang, J., Koster, G., Rijnders, G., Figueiras, F., Pereira, M. and Gomes, MJM. et al. (2018) 'Ferroelectric switching dynamics in 0.5Ba(Zr0.2Ti0.8)O3-0.5(Ba0.7Ca0.3)TiO3 thin films'. Applied Physics Letters, 113 (8). ISSN: 0003-6951

Maier, P., Bechly, M., Mendis, CL. and Hort, N. (2018) 'Precipitation hardening on mechanical and corrosion properties of extruded Mg10Gd modified with Nd and La'. Metals, 8 (8). pp. 1 - 14. ISSN: 2075-4701 Open Access Link

Ebrahimi, R., Rezvani, A. and Bagherpour, E. (2018) 'Circular simple shear extrusion as an alternative for simple shear extrusion technique for producing bulk nanostructured materials'.17th International Conference on Metal Forming. Toyohashi, Japan. 11 - 19 September. Elsevier BV. pp. 1502 - 1508. ISSN: 2351-9789 Open Access Link

Yang, W., Ji, S., Zhang, R., Zhang, J. and Liu, L. (2018) 'Abnormal Grain Refinement Behavior in High-Pressure Die Casting of Pure Mg with Addition of Zr as Grain Refiner'. JOM, 70 (11). pp. 2555 - 2560. ISSN: 1047-4838 Open Access Link

Zhang, Y., Patel, JB., Wang, Y. and Fan, Z. (2018) 'Variation improvement of mechanical properties of Mg-9Al-1Zn alloy with melt conditioned high pressure die casting'. Materials Characterization, 144. pp. 498 - 504. ISSN: 1044-5803 Open Access Link

Fan, Z. and Fang, C. (2018) 'A Comparative Study of Prenucleation on Zr and MgO Substrates by ab initio MD Simulations'.The 11th International Conference on Magnesium Alloys and their Applications. Old Windsor, UK. 1 - 27 July. Proceedings of the 11th International Conference on Magnesium Alloys and their Applications. pp. 41 - 50.Open Access Link

Fang, C. and Fan, Z. (2018) 'A first-principles study of the formation of atomically rough {111} MgO surface and its effect on prenucleation of Mg'.The 7th International Conference on Solidification and Gravity (Solidification and Gravity VII). Miskolc-Lillafüred, Hungary.Open Access Link