Sadeghi, F., Zargar, T., Kim, JW., Heo, Y-U., Lee, JS. and Yim, CH. (2021) 'Role of the annealing twin boundary on the athermal α′-martensite formation in a 304 austenitic stainless steel'. Materialia, 20. pp. 1 - 12. ISSN: 2589-1529

Nikbakht, R., Assadi, H., Jahani, K., Saadati, M. and Jodoin, B. (2021) 'Cold spray deformation and deposition of blended feedstock powders not necessarily obey the rule of mixture'. Surface and Coatings Technology, 424. pp. 127644 - 127644. ISSN: 0257-8972

Khan, MA., Wang, Y., Hamza, M., Yasin, G., Tabish, M., Feng, C., Khan, WQ., Ahmad, T., Liao, W-B. and Afifi, MA. et al. (2021) 'Precipitation behaviour in an Al-Zn-Mg-Cu alloy subjected to high strain rate compression tests'. Materials Characterization, 180. pp. 1 - 8. ISSN: 1044-5803

Daronde, S., Kuthe, A., Keerti, S., Khatirkar, R., Bagde, A., Kamble, M. and Dahake, S. et al. (2021) 'The Effect of Vacuum on the Mechanical Properties of Sand Cast AA6061 Alloy'. Journal of Materials Engineering and Performance, 31 (1). pp. 262 - 271. ISSN: 1059-9495

Li, T., Davies, JMT. and Zhu, X. (2021) 'Revealing the structure and evolution of entrained oxide film in Mg–Y alloy castings'. Journal of Materials Science, 56 (29). pp. 16671 - 16685. ISSN: 0022-2461 Open Access Link

Li, T., Davies, JMT. and Zhu, X. (2021) 'Effect of carrier gases on the entrainment defects within AZ91 alloy castings'. Journal of Magnesium and Alloys, 10 (1). pp. 129 - 145. ISSN: 2213-9567 Open Access Link

Shurkin, PK., Akopyan, TK. and Letyagin, NV. (2021) 'Effect of Indium Microaddition on the Structure and Strengthening of Binary Al–Cu Alloys'. Physics of Metals and Metallography, 122 (8). pp. 807 - 813. ISSN: 0031-918X

Letyagin, NV., Shurkin, PK., Nguen, Z. and Koshmin, AN. (2021) 'Effect of Thermodeformation Treatment on the Structure and Mechanical Properties of the Al3Ca1Cu1.5Mn Alloy'. Physics of Metals and Metallography, 122 (8). pp. 814 - 819. ISSN: 0031-918X

Famelton, JR., Hughes, GM., Williams, CA., Barbatti, C., Moody, MP. and Bagot, PAJ. (2021) 'Xenon plasma focussed ion beam preparation of an Al-6XXX alloy sample for atom probe tomography including analysis of an α-Al(Fe,Mn)Si dispersoid'. Materials Characterization, 178. pp. 111194 - 111194. ISSN: 1044-5803

Yang, X., Gao, F., Tang, F., Hao, X. and Li, Z. (2021) 'Effect of Surface Oxides on the Melting and Solidification of 316L Stainless Steel Powder for Additive Manufacturing'. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 52 (10). pp. 4518 - 4532. ISSN: 1073-5623 Open Access Link

Zhu, X., Wang, S., Dong, X., Liu, X. and Ji, S. (2021) 'Morphologically templated nucleation of primary Si on AlP in hypereutectic Al-Si alloys'. Journal of Materials Science & Technology, 100. pp. 36 - 45. ISSN: 1005-0302 Open Access Link

Beckwith, C., Djambazov, G., Pericleous, K., Tonry, C., Priyadarshi, A., Khavari, M., Tzanakis, I. and Eskin, D. et al. (2021) 'Nonlinear helmholtz modelling of acoustic cavitation in water'. Virtual. 11 - 16 July. "Advances in Acoustics, Noise and Vibration - 2021" Proceedings of the 27th International Congress on Sound and Vibration, ICSV 2021. ISSN: 2329-3675

Luan, Q., Wang, J., Huang, Y., Balint, DS. and Jiang, J. (2021) 'How would the deformation bands affect recrystallization in pure aluminium?'. Materials & Design, 209. pp. 1 - 14. ISSN: 0264-1275 Open Access Link

Rezaei, A., Kermanpur, A., Rezaeian, A., Badrossamay, M., Foroozmehr, E., Sadeghi, F., Han, J. and Park, TM. et al. (2021) 'Contribution of hot isostatic pressing on densification, microstructure evolution, and mechanical anisotropy of additively manufactured IN718 Ni-based superalloy'. Materials Science and Engineering: A, 823. pp. 1 - 15. ISSN: 0921-5093

Karpova, ZA., Shurkin, PK., Sivtsov, KI. and Laptev, IN. (2021) 'Processability and Structure Formation of the Al–Zn–Mg–Ca–Fe–Zr–Sc Alloy upon Hot Rolling and TIG Welding'. Russian Journal of Non-Ferrous Metals, 62 (4). pp. 431 - 440. ISSN: 1067-8212

Deev, VB., Prusov, ES., Shurkin, PK., Ri, EH. and Smetanyuk, SV. (2021) 'Cerium Effect on the Phase Composition and Crystallization Behavior of Aluminum Casting Alloys Based on the Al–Mg–Si System'. Russian Journal of Non-Ferrous Metals, 62 (4). pp. 424 - 430. ISSN: 1067-8212

Jabbareh, MA. and Assadi, H. (2021) 'Modelling of microstructure evolution during laser processing of intermetallic containing ni-al alloys'. Metals, 11 (7). pp. 1 - 15.Open Access Link

DU, Y-X., YANG, X-L., LI, Z-S., HAO, F., MAO, Y-C., LI, S-Q., LIU, X-H., FENG, Y. and YAN, Z-M. et al. (2021) 'Shear localization behavior in hat-shaped specimen of near-α Ti−6Al−2Zr−1Mo−1V titanium alloy loaded at high strain rate'. Transactions of Nonferrous Metals Society of China, 31 (6). pp. 1641 - 1655. ISSN: 1003-6326 Open Access Link

Nikbakht, R., Saadati, M., Assadi, H., Jahani, K. and Jodoin, B. (2021) 'Dynamic microstructure evolution in cold sprayed Ni[sbnd]Ti composite coatings'. Surface and Coatings Technology, 421. pp. 1 - 10. ISSN: 0257-8972 Open Access Link

Morton, JA., Khavari, M., Qin, L., Maciejewska, BM., Tyurnina, AV., Grobert, N., Eskin, DG., Mi, J., Porfyrakis, K., Prentice, P. and Tzanakis, I. et al. (2021) 'New insights into sono-exfoliation mechanisms of graphite: In situ high-speed imaging studies and acoustic measurements'. Materials Today, 49. pp. 10 - 22. ISSN: 1369-7021 Open Access Link

Prusov, ES., Deev, VB., Shurkin, PK. and Arakelian, SM. (2021) 'The effect of alloying elements on the interaction of boron carbide with aluminum melt'. Non-ferrous Metals, 50 (1). pp. 27 - 33. ISSN: 2072-0807

Khavari, M., Priyadarshi, A., Subroto, T., Beckwith, C., Pericleous, K., Eskin, DG. and Tzanakis, I. et al. (2021) 'Scale Up Design Study on Process Vessel Dimensions for Ultrasonic Processing of Water and Liquid Aluminium'. Ultrasonics Sonochemistry, 76. pp. 1 - 13. ISSN: 1350-4177 Open Access Link

Belov, NA., Akopyan, TK., Korotkova, NO., Timofeev, VN. and Shurkin, PK. (2021) 'Effect of cold rolling and annealing temperature on structure, hardness and electrical conductivity of rapidly solidified alloy of Al–Cu–Mn–Zr system'. Materials Letters, 300. pp. 1 - 4. ISSN: 0167-577X

Dong, X., Feng, L., Nyberg, EA. and Ji, S. (2021) 'Development of an Mg–RE-Based Die-Cast Magnesium Alloy for Elevated Applications'.Magnesium 2021. Virtual event. 29 - 18 June. Springer International Publishing. pp. 29 - 36. ISSN: 2367-1181 Open Access Link

Naumova, E., Doroshenko, V., Barykin, M., Sviridova, T., Lyasnikova, A. and Shurkin, P. (2021) 'Hypereutectic al-ca-mn-(Ni) alloys as natural eutectic composites'. Metals, 11 (6). pp. 1 - 16.Open Access Link

Cai, Q., Mendis, CL., Wang, S., Chang, ITH. and Fan, Z. (2021) 'Effect of heat treatment on microstructure and tensile properties of die-cast Al-Cu-Si-Mg alloys'. Journal of Alloys and Compounds, 881. pp. 160559 - 160559. ISSN: 0925-8388

Akopyan, TK., Shurkin, PK., Letyagin, NV., Milovich, FO., Fortuna, AS. and Koshmin, AN. (2021) 'Structure and precipitation hardening response in a cast and wrought Al-Cu-Sn alloy'. Materials Letters, 300. pp. 1 - 4. ISSN: 0167-577X

Ghosh, PS., Arya, A., Basak, CB., Poswal, AK. and Banerjee, S. (2021) 'Chemical ordering as a precursor to formation of ordered δ-UZr2 phase: A theoretical and experimental study'. Journal of Physics Condensed Matter, 33 (25). pp. 254003 - 254003. ISSN: 0953-8984

Lordan, E., Zhang, Y., Dou, K., Tzileroglou, C., Jacot, A., Blake, P. and Fan, Z. et al. (2021) 'Turbulent breakup of non-metallic inclusions and equiaxed crystals during solidification of a hypoeutectic Al-Si alloy'. Materialia, 17. pp. 1 - 19. ISSN: 2589-1529 Open Access Link

Yang, X., Tang, F., Hao, X. and Li, Z. (2021) 'Oxide Evolution During the Solidification of 316L Stainless Steel from Additive Manufacturing Powders with Different Oxygen Contents'. Metallurgical and Materials Transactions B, 52 (4). pp. 2253 - 2262. ISSN: 1073-5615 Open Access Link

Lordan, E., Zhang, Y., Dou, K., Jacot, A., Tzileroglou, C., Blake, P. and Fan, Z. et al. (2021) 'On the probabilistic nature of high-pressure die casting'. Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing, 817. pp. 1 - 8. ISSN: 0921-5093 Open Access Link

Yang, H., Zhang, Y., Wang, J., Liu, Z., Liu, C. and Ji, S. (2021) 'Additive manufacturing of a high strength Al-5Mg2Si-2Mg alloy: Microstructure and mechanical properties'. Journal of Materials Science and Technology, 91 (20 November 2021). pp. 215 - 223. ISSN: 1005-0302 Open Access Link

Beckwith, C., Djambazov, G., Pericleous, K., Subroto, T., Eskin, DG., Roberts, D., Skalicky, I. and Tzanakis, I. et al. (2021) 'Multiphysics Modelling of Ultrasonic Melt Treatment in the Hot-Top and Launder during Direct-Chill Casting: Path to Indirect Microstructure Simulation'. Metals, 11 (5). pp. 1 - 14.Open Access Link

Fang, C., Que, Z. and Fan, Z. (2021) 'Crystal chemistry and electronic structure of the β-AlFeSi phase from first-principles'. Journal of Solid State Chemistry, 299. pp. 1 - 8. ISSN: 0022-4596 Open Access Link

Fan, Z., Gao, F., Wang, Y., Men, H. and Zhou, L. (2021) 'Effect of solutes on grain refinement'. Progress in Materials Science, 123. pp. 1 - 30. ISSN: 0079-6425 Open Access Link

Yang, H., Patel, JB., Yang, X., Gavras, S. and Dieringa, H. (2021) 'Properties of Mg-based metal matrix nanocomposites processed by high shear dispersion technique (HSDT)-A review'. Current Nanomaterials, 6 (2). pp. 106 - 118. ISSN: 2405-4615 Open Access Link

Souissi, M., Fang, CM., Sahara, R. and Fan, Z. (2021) 'Formation energies of θ-Al2Cu phase and precursor Al-Cu compounds: Importance of on-site Coulomb repulsion'. Computational Materials Science, 194. pp. 1 - 7. ISSN: 0927-0256 Open Access Link

K.M., SM., Barekar, NS., Lazaro Nebreda, J., Patel, JB. and Fan, Z. (2021) 'In-situ microstructural control of A6082 alloy to modify second phase particles by melt conditioned direct chill (MC-DC) casting process – A novel approach'. Journal of Materials Processing Technology, 295. pp. 1 - 14. ISSN: 0924-0136 Open Access Link

Yu, K., Hou, L., Guo, M., Li, D., Huang, D., Zhuang, L., Zhang, J. and Wu, P. et al. (2021) 'A method for determining r-value of aluminum sheets with the Portevin-Le Chatelier effect'. Materials Science and Engineering A, 814. pp. 1 - 11. ISSN: 0921-5093

Basak, CB. and Poswal, AK. (2021) 'Non-random structure of hexagonal close packed α-solid solution in Ti-Zr binary system'. Scripta Materialia, 200. pp. 113890 - 113890. ISSN: 1359-6462

Sadeghi, F., Zargar, T., Kim, JW., Heo, Y-U., Lee, JS. and Yim, CH. (2021) 'The effect of Ni depletion on athermal martensitic transformation in 304 austenitic stainless steel'. Materials Characterization, 175. pp. 1 - 14. ISSN: 1044-5803

Subroto, T., Lebon, B., Eskin, D., Skalicky, I., Roberts, D., Tzanakis, I. and Pericleous, K. et al. (2021) 'Numerical modelling and experimental validation of the effect of ultrasonic melt treatment in a direct-chill cast AA6008 alloy billet'. Journal of Materials Research and Technology, 12. pp. 1582 - 1596. ISSN: 2238-7854 Open Access Link

Khavari, M., Priyadarshi, A., Hurrell, A., Pericleous, K., Eskin, D. and Tzanakis, I. (2021) 'Characterization of shock waves in power ultrasound'. Journal of Fluid Mechanics, 915. pp. 1 - 14. ISSN: 0022-1120 Open Access Link

Zhu, X., Liu, F., Wang, S. and Ji, S. (2021) 'The development of low-temperature heat-treatable high pressure die-cast Al-Mg-Fe-Mn alloys with Zn levels'. Journal of Materials Science, 56 (18). pp. 11083 - 11097. ISSN: 0022-2461 Open Access Link

Lazaro Nebreda, J., Patel, J. and Fan, Z. (2021) 'Improved degassing efficiency and mechanical properties of A356 aluminium alloy castings by high shear melt conditioning (HSMC) technology'. Journal of Materials Processing Technology, 294. pp. 1 - 33. ISSN: 0924-0136 Open Access Link

Fan, Z., Men, H., Wang, Y. and Que, Z. (2021) 'A New Atomistic Mechanism for Heterogeneous Nucleation in the Systems with Negative Lattice Misfit: Creating a 2D Template for Crystal Growth'. Metals, 11 (3). pp. 1 - 19.Open Access Link

Huang, Y., Yang, X. and Jiang, J. (2021) 'Crystallographic and Experimental Disproof of Pyramidal < c+a > Slip in Magnesium'. SSRN Electronic Journal.Open Access Link

Chang, I. and Cai, Q. (2021) 'From simple binary to complex multicomponent eutectic alloys'. Progress in Materials Science, 123. pp. 1 - 11. ISSN: 0079-6425 Open Access Link

Shurkin, PK., Karpova, ZA., Latypov, RA. and Musin, AF. (2021) 'Properties of welded joints of the al – zn – mg – ca alloy doped by microadditivies of zirconium and scandium'. Tsvetnye Metally, 2021 (2). pp. 84 - 92. ISSN: 0372-2929

Chankitmunkong, S., Eskin, DG. and Limmaneevichitr, C. (2021) 'Microstructure evolution of an Al-Fe-Ni alloy with Zr and Sc additions upon different cooling rates during solidification for improving the mechanical and electrical conductivity properties'.TMS Annual Meeting. Virtual. 24 - 18 March. Springer International Publishing. pp. 232 - 238. ISSN: 0147-0809 Open Access Link

Chankitmunkong, S., Eskin, DG. and Limmaneevichitr, C. (2021) 'Effects of ultrasonic melt processing on microstructure, mechanical properties and electrical conductivity of hypereutectic Al-Si, Al-Fe and Al-Ni alloys with Zr additions'.TMS Annual Meeting. Virtual. 24 - 18 March. Springer International Publishing. pp. 192 - 197. ISSN: 0147-0809 Open Access Link