Ko, SY., Kim, BY., Kim, YI., Kim, TY., Kim, KT., McKay, BJ. and Shin, JS. et al. (2013) 'Manufacture of CNTs-Al powder precursors for casting of CNTs-Al matrix composites', in Stone, I., McKay, B. and Fan, ZY. (eds.) Trans Tech Publications, Ltd.. , 765. pp. 353 - 357.

Holroyd, NJH., Scamans, GM., Newman, RC. and Vasudevan, AK. (2013) 'Corrosion and stress corrosion of aluminum-lithium alloys', inAluminum-Lithium Alloys: Processing, Properties, and Applications. Elsevier. pp. 457 - 500. ISBN 13: 9780124016989.

Wiese, B., Mendis, C., Blawert, C., Nyberg, E., Kainer, KU. and Hort, N. (2013) 'A new magnesium alloy system: TEXAS', inMagnesium Technology 2013. Springer International Publishing. pp. 231 - 235. ISBN 13: 9783319485799.

Ji, S., Yang, W., Gao, F., Watson, D. and Fan, Z. (2013) 'Effect of iron in Al-Mg-Si-Mn ductile diecast alloy'. Wiley. pp. 317 - 322. ISSN: 0147-0809

Yubo, Z., Fan, Z. and Cui, J. (2013) 'Grain refinement of AZ91D alloy by intensive melt shearing and its persistence after remelting and isothermal holding'. China Foundry, 10 (1). pp. 39 - 42. ISSN: 1672-6421

Yamanoĝlu, R., Karakulak, E., Zeren, A. and Zeren, M. (2013) 'Effect of heat treatment on the tribological properties of Al-Cu-Mg/nanoSiC composites'. Materials and Design, 49. pp. 820 - 825. ISSN: 0264-1275

Meidani, H., Rappaz, M. and Jacot, A. (2013) 'Multiphase-field modeling of micropore formation in metallic alloys'.ASME 2013 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers.

Patel, J., Zuo, Y. and Fan, Z. (2013) 'Liquid metal engineering by application of intensive melt shearing'. Springer International Publishing. pp. 291 - 299.

Elsayed, FR., Sasaki, TT., Mendis, CL., Ohkubo, T. and Hono, K. (2013) 'Compositional optimization of Mg-Sn-Al alloys for higher age hardening response'. Materials Science and Engineering: A, 566. pp. 22 - 29. ISSN: 0921-5093

Tolnai, D., Mendis, CL., Stark, A., Szakács, G., Wiese, B., Kainer, KU. and Hort, N. et al. (2013) 'In situ synchrotron diffraction of the solidification of Mg-RE alloys'. Wiley. pp. 253 - 257. ISSN: 1545-4150

Mendis, CL., Tolnai, D., Blawert, C. and Hort, N. (2013) 'Effect of Sn additions on the age hardening response, microstructures and corrosion resistance of Mg-0.8Ca (wt%) alloys'. Wiley. pp. 237 - 241. ISSN: 1545-4150

Wiese, B., Mendis, C., Blawert, C., Nyberg, E., Kainer, KU. and Hort, N. (2013) 'A new magnesium alloy system: TEXAS'. Wiley. pp. 231 - 235. ISSN: 1545-4150

Tolnai, D., Mendis, CL., Stark, A., Szakács, G., Wiese, B., Kainer, KU. and Hort, N. et al. (2013) 'In situ synchrotron diffraction of the solidification of Mg4Y3Nd'. Materials Letters, 102-103. pp. 62 - 64. ISSN: 0167-577X

Srinivasa, A., Huang, Y., Mendis, CL., Dieringa, H., Blawert, C., Kainer, KU. and Hort, N. et al. (2013) 'Microstructure, mechanical and corrosion properties of Mg-Gd-Zn alloys'.6th International Light Metals Technology Conference (LMT 2013). Brunel Univ, BCAST, Old Windsor, ENGLAND. 1 - 26 July. Trans Tech Publications, Ltd.. pp. 28 - 32. ISSN: 0255-5476

Mendis, CL. and Hono, K. (2013) 'Understanding precipitation processes in magnesium alloys', inFundamentals of Magnesium Alloy Metallurgy. Elsevier. pp. 125 - 151. ISBN 13: 9780857090881.

Yang, L., Huang, Y., Feyerabend, F., Willumeit, R., Mendis, C., Kainer, KU. and Hort, N. et al. (2013) 'Microstructure, mechanical and corrosion properties of Mg-Dy-Gd-Zr alloys for medical applications'. Acta Biomaterialia, 9 (10). pp. 8499 - 8508. ISSN: 1742-7061

Arabgol, Z., Assadi, H., Schmidt, T., Gärtner, F. and Klassen, T. (2013) 'Analysis of thermal history and residual stress in cold sprayed coatings'. Proceedings of the International Thermal Spray Conference. pp. 269 - 274.

Ji, S., Wang, Y., Watson, D. and Fan, Z. (2013) 'Microstructural Evolution and Solidification Behavior of Al-Mg-Si Alloy in High-Pressure Die Casting'. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. pp. 1 - 13. ISSN: 1073-5623

Alba-Baena, N. and Eskin, D. (2013) 'Kinetics of ultrasonic degassing of aluminum alloys'. Wiley. pp. 957 - 962. ISSN: 0147-0809

Alba-Baena, N., Pabel, T., Villa-Sierra, N. and Eskin, D. (2013) 'Effect of ultrasonic melt treatment on degassing and structure of aluminium alloys'.6th International Light Metals Technology Conference (LMT 2013). Brunel Univ, BCAST, Old Windsor, ENGLAND. 1 - 26 July. Trans Tech Publications, Ltd.. pp. 271 - 275. ISSN: 0255-5476

Subroto, T., Miroux, A., Eskin, DG., Ellingsen, K., Marson, A., M'Hamdi, M. and Katgerman, L. et al. (2013) 'Tensile mechanical behavior of as-cast AA7050 alloy in the super-solidus temperature range'. 13th International Conference on Fracture 2013, ICF 2013, 3. pp. 2528 - 2536.

Barekar, NS., Pradhan, R. and Dhindaw, BK. (2013) 'Mechanism of Microstructural Refinement of Al-Cu Alloy During Low Melt Sheared Slope Casting'. Journal of Materials Engineering and Performance, 23 (2). pp. 1 - 5. ISSN: 1059-9495

Miranda, A., Alba-Baena, N., McKay, BJ., Eskin, DG., Ko, SH. and Shin, JS. (2013) 'Study of mechanical properties of an LM24 composite alloy reinforced with Cu-CNT nanofillers, processed using ultrasonic cavitation'.6th International Light Metals Technology Conference (LMT 2013). Brunel Univ, BCAST, Old Windsor, ENGLAND. 1 - 26 July. Trans Tech Publications, Ltd.. pp. 245 - 249. ISSN: 0255-5476

Que, ZP., Lee, JH., Jung, HM., Shin, JH., Han, SZ. and Euh, KJ. (2013) 'Microstructure evolution in Cu-1.54 wt% Cr alloy during directional solidification'. Journal of Crystal Growth, 362 (1). pp. 58 - 61. ISSN: 0022-0248

Cassell, A., Thompson, GE., Zhou, X., Hashimoto, T. and Scamans, G. (2013) 'Relating grain misorientation to the corrosion behaviour of low copper 7xxx aluminium alloys'. Trans Tech Publications, Ltd.. pp. 623 - 628. ISSN: 0255-5476

Lang, YJ., Hou, LG., Huo, WT., Cui, H., Liu, JC., Zhuang, LZ. and Zhang, JS. et al. (2013) 'Effect of strain-induced precipitation on microstructures and fatigue properties of AA 7050 alloy', inProceedings of the 8th Pacific Rim International Congress on Advanced Materials and Processing. Springer International Publishing. , 3. pp. 2435 - 2442. ISBN 13: 9783319485867.

Han, SZ., Gu, JH., Lee, JH., Que, ZP., Shin, JH., Lim, SH. and Kim, SS. et al. (2013) 'Effect of v addition on hardness and electrical conductivity in Cu-Ni-Si alloys'. Metals and Materials International, 19 (4). pp. 637 - 641. ISSN: 1598-9623

Cheng, WL., Que, ZP., Zhang, JS., Xu, CX., Liang, W., You, BS. and Park, SS. et al. (2013) 'Compressive deformation behavior of an indirect-extruded Mg-8Sn-1Al-1Zn alloy'. International Journal of Minerals, Metallurgy and Materials, 20 (1). pp. 49 - 56. ISSN: 1674-4799

Stone, IC., McKay, BJ. and Fan, Z. (2013) 'Preface'.

Al-Helal, K. (2013) 'New Approaches to Casting Hypereutectic Al-Si Alloys to Achieve Simultaneous Refinement of Primary Silicon and Modification of Eutectic Silicon'. PhD Thesis.Open Access Link

Dong, X., Mi, G., He, L. and Li, P. (2013) '3D simulation of plane induction electromagnetic pump for the supply of liquid Al-Si alloys during casting'. Journal of Materials Processing Technology, 213 (8). pp. 1426 - 1432. ISSN: 0924-0136

Secu, CE., Negrea, RF. and Secu, M. (2013) 'Eu³⁺ probe ion for rare-earth dopant site structure in sol-gel derived LiYF4 oxyfluoride glass-ceramic'. Optical Materials, 35 (12). pp. 2456 - 2460. ISSN: 0925-3467

Chang Dr, I. and Zhao, Y. (2013) 'Advances in powder metallurgy: Properties, processing and applications'. Woodhead Publishing Limited. ISSN 13: 9780857094209

Chang Dr, I. (2013) 'Plasma synthesis of metal nanopowders', inAdvances in Powder Metallurgy: Properties, Processing and Applications. Elsevier. pp. 69 - 85. ISBN 13: 9780857094209.

Pavey, J., Penchev, P., Dimov, S., Chang, I., Petkov, P. and Kolew, A. (2013) 'Laser Machining of a Zr-Based Bulk Metallic Glass with Nano-Second Laser'.10th International Conference on Multi-Material Micro Manufacture. Research Publishing Services. pp. 147 - 151.

Lázaro, J., Solórzano, E., Escudero, J., de Saja, J. and Rodríguez-Pérez, M. (2012) 'Applicability of Solid Solution Heat Treatments to Aluminum Foams'. Metals, 2 (4). pp. 508 - 528. ISSN: 2075-4701 Open Access Link

Hintzsche, LE., Fang, CM., Watts, T., Marsman, M., Jordan, G., Lamers, MWPE., Weeber, AW. and Kresse, G. et al. (2012) 'Density functional theory study of the structural and electronic properties of amorphous silicon nitrides: Si3N4-x:H'. Physical Review B - Condensed Matter and Materials Physics, 86 (23). ISSN: 1098-0121

Böttger, B., Apel, M., Santillana, B. and Eskin, DG. (2012) 'Phase-field modelling of microstructure formation during the solidification of continuously cast low carbon and HSLA steels'.13th International Conference on Modeling of Casting, Welding and Advanced Solidification Processes (MCWASP). Schladming, AUSTRIA. 1 - 22 June. IOP Publishing. pp. 012107 - 012107. ISSN: 1757-8981

Zhang, L., Eskin, DG., Miroux, A., Subroto, T. and Katgerman, L. (2012) 'Effect of inlet geometry on macrosegregation during the direct chill casting of 7050 alloy billets: Experiments and computer modelling'.13th International Conference on Modeling of Casting, Welding and Advanced Solidification Processes (MCWASP). Schladming, AUSTRIA. 1 - 22 June. IOP Publishing. pp. 012019 - 012019. ISSN: 1757-8981

Subroto, T., Miroux, A., Mortensen, D., M'Hamdi, M., Eskin, DG. and Katgerman, L. (2012) 'Semi-quantitative predictions of hot tearing and cold cracking in aluminum DC casting using numerical process simulator'.13th International Conference on Modeling of Casting, Welding and Advanced Solidification Processes (MCWASP). Schladming, AUSTRIA. 1 - 22 June. IOP Publishing. pp. 012068 - 012068. ISSN: 1757-8981

Santillana, B., Boom, R., Eskin, D., Mizukami, H., Hanao, M. and Kawamoto, M. (2012) 'High-temperature mechanical behavior and fracture analysis of a low-carbon steel related to cracking'. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 43 (13). pp. 5048 - 5057. ISSN: 1073-5623

Jafarzadegan, M., Feng, AH., Abdollah-Zadeh, A., Saeid, T., Shen, J. and Assadi, H. (2012) 'Microstructural characterization in dissimilar friction stir welding between 304 stainless steel and st37 steel'. Materials Characterization, 74. pp. 28 - 41. ISSN: 1044-5803

Bhattacharjee, T., Mendis, CL., Sasaki, TT., Ohkubo, T. and Hono, K. (2012) 'Effect of Zr addition on the precipitation in Mg-Zn-based alloy'. Scripta Materialia, 67 (12). pp. 967 - 970. ISSN: 1359-6462

Tirumalasetty, GK., Fang, CM., Xu, Q., Jansen, J., Sietsma, J., Van Huis, MA. and Zandbergen, HW. et al. (2012) 'Novel ultrafine Fe(C) precipitates strengthen transformation-induced- plasticity steel'. Acta Materialia, 60 (20). pp. 7160 - 7168. ISSN: 1359-6454

Meidani, H., Jacot, A. and Rappaz, M. (2012) '3D Phase-Field Simulation of Micropore Formation during Solidification: Morphological Analysis'. IOP Conference Series: Materials Science and Engineering, 33 (1). pp. 012104 - 012104. ISSN: 1757-8981

Rougier, L., Jacot, A., Gandin, CA., Di Napoli, P., Théry, PY. and Jaquet, V. (2012) 'Numerical simulation of microstructure formation during solidification and heat treatments of Ni-base superalloys'. Proceedings of the International Symposium on Superalloys. pp. 601 - 608.

Pintilie, I., Pasuk, I., Ibanescu, GA., Negrea, R., Chirila, C., Vasile, E. and Pintilie, L. et al. (2012) 'The impact of the Pb(Zr,Ti)O3-ZnO interface quality on the hysteretic properties of a metal-ferroelectric-semiconductor structure'. Journal of Applied Physics, 112 (10). ISSN: 0021-8979

Zhang, Y., Ma, N., Brian, M., Li, X. and Wang, H. (2012) 'The role of Fe on the grain refinement of high purity aluminium'. Trans Tech Publications, Ltd.. pp. 2264 - 2268. ISSN: 1022-6680

Durrell, JH., Dancer, CEJ., Dennis, A., Shi, Y., Xu, Z., Campbell, AM., Babu, NH., Todd, RI., Grovenor, CRM. and Cardwell, DA. et al. (2012) 'A trapped field of >3 T in bulk MgB 2 fabricated by uniaxial hot pressing'. Superconductor Science and Technology, 25 (11). pp. 112002 - 112002. ISSN: 0953-2048

Xia, M., Huang, Y., Cassinath, Z. and Fan, Z. (2012) 'Continuous twin screw rheo-extrusion of an AZ91D magnesium alloy'. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 43 (11). pp. 4331 - 4344. ISSN: 1073-5623 Open Access Link