Haindl, S., Eisterer, M., Weber, HW., Babu, NH. and Cardwell, DA. (2005) 'Grain boundaries in multi-seeded melt-grown superconductors'. IEEE Transactions on Applied Superconductivity, 15 (2 PART III). pp. 3129 - 3132. ISSN: 1051-8223

Van Der Laag, NJ., Fang, CM., De With, G., De Wijs, GA. and Brongersma, HH. (2005) 'Geometry of {001} surfaces of spinel (MgAl2O4): First-principles simulations and experimental measurements'. Journal of the American Ceramic Society, 88 (6). pp. 1544 - 1548. ISSN: 0002-7820

Das, A. and Fan, ZY. (2005) 'Semi-solid processing of metallic alloys', inThe Deformation and Processing of Structural Materials. Elsevier. pp. 252 - 283. ISBN 13: 9781855737389.

Iida, K., Babu, NH., Shi, YH. and Cardwell, DA. (2005) 'The effect of the addition of zirconium-containing compounds on the microstructure and superconducting properties of mono-domain Y-Ba-Cu-O bulk superconductors'. Superconductor Science and Technology, 18 (5). pp. 704 - 709. ISSN: 0953-2048

Sahoo, KL. and Stone, IC. (2005) 'Effect of Si on the formation and stability of the icosahedral quasicrystalline phase in Al-Fe-Cr-Ti alloys'. Philosophical Magazine Letters, 85 (5). pp. 231 - 245. ISSN: 0950-0839

Ji, S., Qian, M. and Fan, Z. (2005) 'Solidification microstructure and mechanical properties of AM series Mg-alloys processed by rheo-diecasting'.Solidification Processing 2007. Sheffield. Proceedings of the 5th decennial international conference on solidification processing. pp. 605 - 609.

Suyitno., Eskin, DG. and Katgerman, L. (2005) 'Thermal contraction of AA5182 for prediction of ingot distortions'.6th International Conference on Fracture and Strength of Solids. Bali, INDONESIA. 4 - 6 April. TRANS TECH PUBLICATIONS LTD. pp. 977 - 982. ISSN: 1013-9826

Shi, Y., Babu, NH. and Cardwell, DA. (2005) 'Development of a generic seed crystal for the fabrication of large grain (RE)-Ba-Cu-O bulk superconductors'. Superconductor Science and Technology, 18 (4). pp. L13 - L16. ISSN: 0953-2048

Waite, AM., Lloyd, NS., Osman, K., Zhang, W., Ernst, T., Achard, H., Wang, Y., Deleonibus, S., Hemment, PLF., Bagnall, DM., Evans, AGR. and Ashburn, P. et al. (2005) 'Raised source/drains for 50 nm MOSFETs using a silane/dichlorosilane mixture for selective epitaxy'. Solid-State Electronics, 49 (4). pp. 529 - 534. ISSN: 0038-1101

El Mubarek, HAW., Karunaratne, M., Bonar, JM., Dilliway, GD., Wang, Y., Hemment, PLF., Willoughby, AF. and Ashburn, P. et al. (2005) 'Effect of fluorine implantation dose on boron transient enhanced diffusion and boron thermal diffusion in Si1-xGex'. IEEE Transactions on Electron Devices, 52 (4). pp. 518 - 526. ISSN: 0018-9383

Kutty, TRG., Khan, KB., Kutty, PS., Basak, CB., Sengupta, AK., Mehrotra, RS., Majumdar, S. and Kamath, HS. et al. (2005) 'Densification behaviour and sintering kinetics of (U0.45Pu 0.55)C pellets'. Journal of Nuclear Materials, 340 (1). pp. 113 - 118. ISSN: 0022-3115

Bain, M., El Mubarek, HAW., Bonar, JM., Wang, Y., Buiu, O., Gamble, H., Armstrong, BM., Hemment, PLF., Hall, S. and Ashburn, P. et al. (2005) 'SiGe HBTs on bonded SOI incorporating buried silicide layers'. IEEE Transactions on Electron Devices, 52 (3). pp. 317 - 324. ISSN: 0018-9383

Iida, K., Babu, NH., Reddy, ES., Shi, YH. and Cardwell, DA. (2005) 'The effect of nano-size ZrO2 powder addition on the microstructure and superconducting properties of single-domain Y-Ba-Cu-O bulk superconductors'. Superconductor Science and Technology, 18 (3). pp. 249 - 254. ISSN: 0953-2048

McKay, BJ. and Schumacher, P. (2005) 'Heterogeneous nucleation mechanisms of TiB particles in Al alloys', in Tiryakioglu, M. and Crepeau, PN. (eds.) MINERALS, METALS & MATERIALS SOC. pp. 155 - 164. ISBN 10: 0-87339-583-2.

Turchin, AN., Eskin, DG. and Katgerman, L. (2005) 'Interaction between structure formation and melt flow during solidification: First results on experiments with electromagnetic pump'.Technical Session on Light Metals 2005 held at the 134th TMS Annual Meeting. San Francisco, CA. 13 - 17 February. MINERALS, METALS & MATERIALS SOC. pp. 1025 - 1029. ISSN: 0147-0809

Reddy, ES., Hari Babu, N., Shi, Y., Cardwell, DA. and Schmitz, GJ. (2005) 'Processing of large grain Y-123 superconductors with pre-defined porous structures'. Superconductor Science and Technology, 18 (2). pp. S15 - S18. ISSN: 0953-2048

Babu, NH., Kambara, M., Reddy, ES., Shi, Y. and Cardwell, DA. (2005) 'Improved magnetic flux pinning in melt processed (Y, Nd)Ba 2Cu3O7-δ superconductor'. Superconductor Science and Technology, 18 (2). pp. S38 - S42. ISSN: 0953-2048

Cardwell, DA., Murakami, M., Zeisberger, M., Gawalek, W., Gonzalez-Arrabal, R., Eisterer, M., Weber, HW., Fuchs, G., Krabbes, G., Leenders, A., Freyhardt, HC. and Babu, NH. et al. (2005) 'Round robin tests on large grain melt processed Sm-Ba-Cu-O bulk superconductors'. Superconductor Science and Technology, 18 (2). pp. S173 - S179. ISSN: 0953-2048

El Mubarek, HAW., Wang, Y., Price, R., Bonar, JM., Zhang, J., Hemment, PLF. and Ashburn, P. et al. (2005) 'Suppression of boron transient enhanced diffusion in silicon and silicon germanium by fluorine implantation'. Materials Science in Semiconductor Processing, 8 (1-3 SPEC. ISS.). pp. 103 - 109. ISSN: 1369-8001

Yong, X., Chang, IT. and Jones, IP. (2005) 'Formation of a quasicrystalline phase in mechanically alloyed A165Cu25Fe15'. Journal of Alloys and Compounds, 387 (1-2). pp. 128 - 133. ISSN: 0925-8388

Fan, Z. and Liu, G. (2005) 'Solidification behaviour of AZ91D alloy under intensive forced convection in the RDC process'. Acta Materialia, 53 (16). pp. 4345 - 4357. ISSN: 1359-6454

Liu, YQ., Qian, M. and Fan, Z. (2005) 'Microstructure and mechanical properties of a rheo-diecast Mg-10Zn-4.5Al alloy'. Materials Transactions, 46 (10). pp. 2221 - 2228. ISSN: 1345-9678

Tang, H., Wrobel, LC. and Fan, Z. (2005) 'Hydrodynamic analysis of binary immiscible metallurgical flow in a novel mixing process: rheomixing'. Applied Physics A: Materials Science and Processing, 81 (3). pp. 549 - 559. ISSN: 0947-8396 Open Access Link

Fang, X. and Fan, Z. (2005) 'Microstructure of Zn-Pb immiscible alloys obtained by a rheomixing process'. Materials Science and Technology, 21 (3). pp. 366 - 372. ISSN: 0267-0836

Fan, Z. (2005) 'Development of the rheo-diecasting process for magnesium alloys'. Materials Science and Engineering: A, 413-414. pp. 72 - 78. ISSN: 0921-5093

Fan, Z., Liu, G. and Hitchcock, A. (2005) 'Solidification behaviour under intensive forced convection'. Materials Science and Engineering: A, 413-414. pp. 229 - 235. ISSN: 0921-5093

Falticeanu, LC., Chang, ITH., Falticeanu, CT. and Ciortan, S. (2005) 'New methods for assessing the frictional properties in a mass of consolidated powders'. Tribology in Industry, 27 (1-2). pp. 17 - 21. ISSN: 0354-8996

Eskin, DG., Du, Q., Ruvalcaba, D. and Katgerman, L. (2005) 'Experimental study of structure formation in binary Al-Cu alloys at different cooling rates'. Materials Science and Engineering A: Structural Materials Properties Microstructure and Processing, 405 (1-2). pp. 1 - 10. ISSN: 0921-5093

Ji, S., Zhen, Z. and Fan, Z. (2005) 'Effects of rheo-die casting process on the microstructure and mechanical properties of AM50 magnesium alloy'. Materials Science and Technology, 21 (9). pp. 1019 - 1024. ISSN: 0267-0836

Kim, JS., Chang, I., Jiang, K. and Falticeanu, CL. (2005) 'Sintering of loosely packed powder mixture of ultrafine aluminium and nanopowder of Cu and Sn'. Euro PM 2005: Powder Metallurgy Congress and Exhibition. pp. 219 - 224.

Das, A. and Fan, ZY. (2005) 'Semi-solid processing of metallic alloys', inThe Deformation and Processing of Structural Materials: A Volume in Woodhead Publishing Series in Civil and Structural Engineering. pp. 252 - 283.

Eskin, DG., Savran, VI. and Katgerman, L. (2005) 'Erratum: "Effects of melt temperature and casting speed on the structure and defect formation during direct-chill casting of an Al-Cu alloy" (Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science (2005) vol. 36A (1965-1976))'. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 36 (9). pp. 2561. ISSN: 1073-5623

Kim, JS., Jiang, K., Chang, I. and Falticeanu, CL. (2005) 'Micro-moulding of Al alloy powder mixture containing ultrafine AL and nano-sized Cu particles'. Euro PM 2005: Powder Metallurgy Congress and Exhibition. pp. 399 - 404.

Mitrovic, IZ., Buiu, O., Hall, S., Zhang, J., Wang, Y., Hemment, PLF., El Mubarek, HAW. and Ashburn, P. et al. (2005) 'Electrical and materials characterization of GSMBE grown Si 1-x-yGexCy layers for heterojunction bipolar transistor applications'. Semiconductor Science and Technology, 20 (1). pp. 95 - 102. ISSN: 0268-1242

Eskin, DG., Savran, VI. and Katgerman, L. (2005) 'Effects of melt temperature and casting speed on the structure and defect formation during direct-chill casting of an Al-Cu alloy'. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 36 (7). pp. 1965 - 1976. ISSN: 1073-5623

Reddy, ES., Babu, NH., Shi, Y. and Cardwell, DA. (2005) 'Effect of size, morphology and crystallinity of seed crystal on the nucleation and growth of single grain Y-Ba-Cu-O'. Journal of the European Ceramic Society, 25 (12 SPEC. ISS.). pp. 2935 - 2938. ISSN: 0955-2219

Reddy, ES., Babu, NH., Iida, K., Withnell, TD., Shi, Y. and Cardwell, DA. (2005) 'The effect of size, morphology and crystallinity of seed crystals on the nucleation and growth of Y-Ba-Cu-O single-grain superconductors'. Superconductor Science and Technology, 18 (1). pp. 64 - 72. ISSN: 0953-2048

Babu, NH., Iida, K., Shi, Y. and Cardwell, DA. (2005) 'Fabrication of high performance light rare earth based single-grain superconductors in air'. Applied Physics Letters, 87 (20). pp. 1 - 3. ISSN: 0003-6951

Attema, JJ., Fang, CM., Chioncel, L., De Wijs, GA., Lichtenstein, AI. and De Groot, RA. (2004) 'Defects in half-metals and finite temperature'. Journal of Physics Condensed Matter, 16 (48). pp. S5517 - S5524. ISSN: 0953-8984

Zmorayová, K., Šefčíková, M., Diko, P., Babu, NH. and Cardwell, DA. (2004) 'New pinning centres in YBCO bulk supreconductors with depleted uranium addition'. Czechoslovak Journal of Physics, 54 (SUPPL. 4). pp. 469 - 472. ISSN: 0011-4626

Sefcikova, M., Zmorayová, K., Diko, P., Babu, NH. and Cardwell, DA. (2004) 'Nanosized pinning centers in YBCO bulk superconductors with complex alloying'. Czechoslovak Journal of Physics, 54 (SUPPL. 4). pp. 473 - 476. ISSN: 0011-4626

Ji, S., Liu, G., Zhang, E. and Fan, Z. (2004) 'Development of the rheo-diecasting process for Mg- alloys and their components'. Limassol, Cyprus. 1 Proceedings of the 8th International Conference on Semi-Solid Processing of Alloys and Composites, S2P 2004. pp. 285 - 290.

Campbell, AM., Loram, JW., Hari-Babu, N., Cooper, JR. and Cardwell, DA. (2004) 'Reversible magnetization of a strong-pinning superconductor'. Physical Review B - Condensed Matter and Materials Physics, 70 (21). pp. 1 - 6. ISSN: 1098-0121

Pandit, H., Mishra, A., Babu, NH., He, P., Isfort, D., Chaud, X., Ferendeci, AM., Cardwell, DA., Tournier, R., Mast, D. and Shi, D. et al. (2004) 'RF property characterization of single domain YBa 2Cu 3O x'. Materials Research Society Symposium Proceedings. pp. 181 - 183. ISSN: 0272-9172

Fan, Z., Ji, S. and Fang, X. (2004) 'Rheo-diecasting of aluminium alloys and components'. Limassol, Cyprus. 1 Proceedings of the 8th International Conference on Semi-Solid Processing of Alloys and Composites, S2P 2004. pp. 111 - 120.

Li, YQ., Fang, CM., De With, G. and Hintzen, HT. (2004) 'Preparation, structure and photoluminescence properties of Eu ²⁺ and Ce ³⁺-doped SrYSi 4N 7'. Journal of Solid State Chemistry, 177 (12). pp. 4687 - 4694. ISSN: 0022-4596

Fang, CM., Hintzen, HT. and De With, G. (2004) 'High-pressure phases of MgSiN2 from first-principles calculations'. Applied Physics A: Materials Science and Processing, 78 (5). pp. 717 - 719. ISSN: 0947-8396

Suyitno., Savran, VI., Katgerman, L. and Eskin, DG. (2004) 'Effects of alloy composition and casting speed on structure formation and hot tearing during direct-chill casting of Al-Cu alloys'. Metallurgical and Materials Transactions A, 35 (11). pp. 3551 - 3561. ISSN: 1073-5623

Eskin, DG., Zuidema, J., Savran, VI. and Katgerman, L. (2004) 'Structure formation and macrosegregation under different process conditions during DC casting'. Materials Science and Engineering: A, 384 (1-2). pp. 232 - 244. ISSN: 0921-5093

Cizek, P., McKay, BJ. and Lozano-Perez, S. (2004) 'Investigation of the interfaces between boride particles and aluminium in the as-received and re-melted Ti-B-Al grain refiner master alloy'.Institute-of-Physics-Electron-Microscopy and Analysis-Group Conference (EMAG 2003). Univ Oxford, Examinat Sch, Oxford, ENGLAND. 19 - 5 September. IOP PUBLISHING LTD. pp. 429 - 432. ISSN: 0951-3248

El Mubarek, HAW., Bonar, JM., Dilliway, GD., Ashburn, P., Karunaratne, M., Willoughby, AF., Wang, Y., Hemment, PLF., Price, R., Zhang, J. and Ward, P. et al. (2004) 'Effect of fluorine implantation dose on boron thermal diffusion in silicon'. Journal of Applied Physics, 96 (8). pp. 4114 - 4121. ISSN: 0021-8979