![BCAST](/people/content/default-thumbnail.jpg)
BCAST
View our websiteAl-Helal, K., Stone, I. and Fan, Z. (2016) 'Refinement of Primary Silicon Crystals by Novel Al-ZnS Master Alloy in Solidification of Hypereutectic Al-Si Alloys', in Williams, E. (ed.) Light Metals 2016. Wiley. pp. 271 - 273. ISBN 13: 9781119274780. Open Access Link
Nadendla, H. and Joshi, U. (Accepted) 'Grain refiner for Magnesium alloys'.
McKay, BJ., Schumacher, P., Eck, S. and Ludwig, A. (Accepted) 'International Journal of Cast Metals Research'. Maney Publishing.
McKay, BJ., Cizek, P. and Schumacher, P. (Accepted) 'Nucleation mechanisms of TiBAl additions in Al-Ni-Si alloys', in Tms. pp. 833 - 838.
Cizek, P., McKay, BJ. and Schumacher, P. (Accepted) 'Study of Heterogeneous Nucleation of α-Al on Grain Refiner Particles in during Rapid Solidification', in Wiley-VCH Verlag GmbH. pp. 251 - 256.
Burugapalli, K., Razavi, M., Zhou, L. and Huang, Y. (2016) 'In Vitro Cytocompatibility Study of a Medical beta -Type Ti-35.5Nb-5.7Ta Titanium Alloy'. Journal of Biomaterials and Tissue Engineering, 6 (2). pp. 141 - 148. ISSN: 2157-9091 Open Access Link
Ingale, SV., Wagh, PB., Sastry, PU., Basak, CB., Bandyopadhyay, D., Phapale, SB. and et al. (2016) 'Studies on impact sensitivity of nanosized trinitrotoluene (TNT) confined in silica processed by sol-gel method'. Defence Technology, 12 (1). pp. 46 - 51. ISSN: 2214-9147
Holroyd, NJH. and Scamans, GM. (2016) 'Editorial: Sensitization, intergranular corrosion, and environment-induced cracking of aluminum-magnesium alloys'. Corrosion, 72 (2). pp. 135. ISSN: 0010-9312
Holroyd, H. and Scamans, GM. (2016) 'Sensitization, Intergranular Corrosion, and Environment-Induced Cracking of Aluminum-Magnesium Alloys'. CORROSION, 72 (2). pp. 135 - 135. ISSN: 0010-9312
Kang, B., Feng, Q., Summers, C., Fang, CM., Adhikari, R. and Biswas, K. (2016) 'Emerging New Pseudobinary and Ternary Halides as Scintillators for Radiation Detection'. IEEE Transactions on Nuclear Science, 64 (7). pp. 1817 - 1824. ISSN: 0018-9499 Open Access Link
Eskin, D., Wang, F., Connolley, T. and Mi, J. (2016) 'Effect of ultrasonic melt treatment on the refinement of primary Al3Ti intermetallic in an Al-0.4Ti alloy'. Journal of Crystal Growth, 435. pp. 24 - 30. ISSN: 1873-5002 Open Access Link
Tzanakis, I., Lebon, GSB., Eskin, D. and Pericleous, K. (2016) 'Investigation of the factors influencing cavitation intensity during the ultrasonic treatment of molten aluminium'. MATERIALS & DESIGN, 90. pp. 979 - 983. ISSN: 0261-3069 Open Access Link
Mirihanage, W., Xu, W., Tamayo-Ariztondo, J., Eskin, D., Garcia-Fernandez, M., Srirangam, P. and et al. (2016) 'Synchrotron radiographic studies of ultrasonic melt processing of metal matrix nano composites'. Materials Letters, 164. pp. 484 - 487. ISSN: 0167-577X Open Access Link
Nadendla, H. (2016) 'A trapped magnetic field of 3T in homogeneous, bulk MgB2 superconductors fabricated by a Modified Precursor Infiltration and Growth (MPIG) process'. Superconductor Science and Technology, 29 (3). pp. 035008 - 035008. ISSN: 1361-6668 Open Access Link
Leese, RJ., Ivanov, A. and Babu-Nadendla, H. (2016) 'The Potential to Machine Superconductors with Electrochemical Machining'. Journal of Multiscale Modelling, 07 (01). pp. 1640001 - 1640001. ISSN: 1756-9737
Fang, CM. and Biswas, K. (2016) 'Quaternary Iodides A(BaSr)I 5 :Eu 2+ (A = K, Cs) as Scintillators for Radiation Detection'. The Journal of Physical Chemistry C, 120 (2). pp. 1225 - 1236. ISSN: 1932-7447
Tzanakis, I., Hodnett, M., Lebon, GSB., Dezhkunov, N. and Eskin, DG. (2016) 'Calibration and performance assessment of an innovative high-temperature cavitometer'. Sensors and Actuators, A: Physical, 240 (1 April 2016). pp. 57 - 69. ISSN: 0924-4247 Open Access Link
Lu, L., Hou, LG., Zhang, JX., Wang, HB., Cui, H., Huang, JF., et al. (2016) 'Microstructure characteristics of spray-formed high speed steel and its evolution during subsequent hot deformation'. Journal of Materials Research, 31 (2). pp. 274 - 280. ISSN: 0884-2914
Tzanakis, I., Lebon, GSB., Eskin, D. and Pericleous, KA. (2016) 'Characterisation of the ultrasonic acoustic spectrum and pressure field in aluminium melt with an advanced cavitometer'. Journal of Materials Processing Technology, 229. pp. 582 - 586. ISSN: 1873-4774 Open Access Link
Razavi, M., Burugapalli, K., Zhou, L. and Huang, Y. (2016) 'Human embryonic kidney cell behaviour on a new β-type titanium alloy by Alamar Blue assay'.Annual Conference and Expo on Biomaterials. Crowne Plaza London-Heathrow, London, UK.
Patel, JB., Lloyd, P., Peng, G. and Fan, Z. (2016) 'Development of the new high shear technology for continuous processing of Mg-alloys for ingot casting'.Magnesium Technology Symposium held during the 145th TMS Annual Meeting and Exhibition. Nashville, TN. 1 - 18 February. Wiley. pp. 29 - 33. ISSN: 1545-4150
Srinivasan, A., Dieringa, H., Mendis, CL., Huang, Y., Rajesh Kumar, R., Kainer, KU. and et al. (2016) 'Creep behavior of Mg-10Gd-xZn (x=2 and 6wt%) alloys'. Materials Science and Engineering A, 649. pp. 158 - 167. ISSN: 0921-5093
D'Elia, F., Tolnai, D., Mendis, CL. and Hort, N. (2016) 'Hot tearing susceptibility of Mg-5Nd-xZn alloys'.TMS annaual Meeting. Orlando Florida USA. 1 - 18 February. Wiley. pp. 129 - 134. ISSN: 1545-4150 Open Access Link
Szakács, G., Mendis, CL., Tolnai, D., Vlcek, M., Lukác, F., Stulíková, I., et al. (2016) 'As solidified microstructure investigation of Mg15Y and MgxYyGd (x+y=15 wt.%) ternary alloys'.Magnesium Technology Symposium held during the 145th TMS Annual Meeting and Exhibition. Nashville, TN. 1 - 18 February. Springer International Publishing. pp. 23 - 27. ISSN: 1545-4150
Niu, Z. and Cheng, K. (2016) 'Multiphysics based modelling and analysis of micro milling metal matrix composites (MMCs) against the effects of key process variables'. Proceedings of the 16th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2016.
Zhou, M., Jiang, L., Wang, Y., Chen, S. and Usmani, A. (2016) 'CASE STUDY OF RESIDUAL FIRE RESISTANTCE OF MULTISTORY STEEL FRAMES FOLLOWING MODERATE EARTHQUAKES'. STEEL AND ALUMINIUM STRUCTURES.
Shi, J., Hou, L., Ma, C., Zuo, J., Cui, H., Zhuang, L. and et al. (2016) 'Mechanical properties and microstructures of 5052 Al alloy processed by asymmetric cryorolling'. Materials Science Forum, 850. pp. 823 - 828. ISSN: 0255-5476
Ji, S., Yang, H., Watson, D. and Fan, Z. (2016) 'Weibull analysis for the repeatibility of die castings made by an Al-Mg-Si-Mn ALLOY'.Symposium on Light Metals held during 145th The-Minerals-Metals-and-Materials-Society Annual Meeting and Exhibition. Nashville, TN. 1 - 18 February. JOHN WILEY & SONS INC. pp. 681 - 685. ISSN: 0147-0809
Ma, C., Hou, L., Zhang, J. and Zhuang, L. (2016) 'Influence of thickness reduction per pass on strain, microstructures and mechanical properties of 7050 Al alloy sheet processed by asymmetric rolling'. Materials Science and Engineering: A, 650. pp. 454 - 468. ISSN: 0921-5093
Belov, NA., Shurkin, PK. and Akopyan, TK. (2016) 'Structure and properties of deformed intermediate products of high-strength aluminium alloy (Al - Zn - Mg - Ni - Fe system)'. Tsvetnye Metally. pp. 98 - 103. ISSN: 0372-2929
Shurkin, PK., Akopyan, TK. and Korotkova, NO. (2016) 'Influence of hot isostatic pressing on structure and mechanical properties of castings made of high-strength sparingly alloyed aluminium alloy ATs6N0.5Zh (AΦ6H0,5) with increased content of lead'. Tsvetnye Metally. pp. 89 - 96. ISSN: 0372-2929
Sree Manu, KM., Resmi, VG., Rajan, TPD., Joseph, P., Pai, BC. and Srivatsan, TS. (2016) 'Use of squeeze infiltration processing for fabricating micro silica reinforced aluminum alloy-based metal matrix composite', inAdvanced Composites for Aerospace, Marine, and Land Applications. Springer International Publishing. pp. 81 - 90. ISBN 13: 9783319485928.
Sree Manu, KM., Resmi, VG., Joseph, P., Rajan, TPD., Pai, BC. and Srivatsan, TS. (2016) 'Fabrication and characterization of a hybrid functionally graded metal-matrix composite using the technique of squeeze infiltration', inAdvanced Composites for Aerospace, Marine, and Land Applications. Springer International Publishing. pp. 91 - 100. ISBN 13: 9783319485928.
Sree Manu, KM., Rajan, TPD. and Pai, BC. (2016) 'Structure and properties of squeeze infiltrated zirconia grade-aluminosilicate short fiber reinforced aluminum composites'. Journal of Alloys and Compounds, 688. pp. 489 - 499. ISSN: 0925-8388
Zhou, XL., Zhu, XZ., Gao, T., Wu, YY. and Liu, XF. (2016) 'Evolution of a novel Si-18Mn-16Ti-11P alloy in Al-Si melt and its influence on microstructure and properties of high-Si Al-Si alloy'. Results in Physics, 6. pp. 737 - 745. ISSN: 2211-3797
Li, Z., Limodin, N., Tandjaoui, A., Quaegebeur, P., Witz, J-F. and Balloy, D. (2016) 'Damage investigation in A319 aluminum alloy by digital image correlation during in-situ tensile tests'. Procedia Structural Integrity, 2. pp. 3415 - 3422. ISSN: 2452-3216
Schmid-Fetzer, R., Kozlov, A., Wiese, B., Mendis, CL., Tolnai, D., Kainer, KU. and et al. (2016) 'Thermodynamic Description of Reactions between Mg and CaO', inMagnesium Technology 2016. Springer International Publishing. pp. 67 - 72. ISBN 13: 9783319486208.
D’Elia, F., Tolnai, D., Mendis, CL. and Hort, N. (2016) 'Hot Tearing Susceptibility of Mg-5Nd-xZn Alloys', inMagnesium Technology 2016. Springer International Publishing. pp. 129 - 134. ISBN 13: 9783319486208.
Wang, Y., Zhou, L. and Fan, Z. (2016) 'Mechanism of zirconium poisioning effect on TiB2 inoculation in aluminium alloys'. TMS Light Metals. pp. 725 - 729. ISSN: 0147-0809
Nowak, M. and Nadendla, HB. (2016) 'Grain refiner for aluminium-silicon sand casting aloys', inLight Metals 2012. Springer International Publishing. pp. 349 - 353. ISBN 13: 9783319485706.
Kawther, AH., Stone, I. and Fan, Z. (2016) 'Refinement of primary silicon crystals by novel Al-ZnS Master alloy in solidification of hypereutectic Al-Si Alloys'. TMS Light Metals. pp. 271 - 273. ISSN: 0147-0809
Bagherpour, E., Qods, F., Ebrahimi, R. and Miyamoto, H. (2016) 'Texture changes during simple shear extrusion (SSE) processing of pure copper'. Materials Transactions, 57 (9). pp. 1386 - 1391. ISSN: 1345-9678
Assadi, H., Gaertner, F. and Klassen, T. (2016) 'Modeling and Simulation of Cold Spray', in Kay, CM. and Karthikeyan, J. (eds.) High Pressure Cold Spray Principles and Applications. pp. 67 - 106. ISBN 10: 162708097X.
Klassen, T., Gaertner, F. and Assadi, H. (2016) 'Process Science of Cold Spray', in Kay, CM. and Karthikeyan, J. (eds.) High Pressure Cold Spray Principles and Applications. pp. 17 - 66. ISBN 10: 162708097X.
Karakulak, E., Koç, FG., Yamanoglu, R. and Zeven, M. (2016)
'Mechanical properties of hypoeutectic Al-Ni alloys with Al
Alba-Baena, N. and Eskin, D. (2016) 'Kinetics of ultrasonic degassing of aluminum alloys'. Springer International Publishing. pp. 957 - 962. ISSN: 2367-1181
Ji, S., Yang, W., Gao, F., Watson, D. and Fan, Z. (2016) 'Effect of iron in Al-Mg-Si-Mn ductile diecast alloy'.Proceedings of the symposia sponsored by the TMS Aluminum Committee at the TMS 2013 Annual Meeting & Exhibition. San Antonio, TX, USA. 1 - 7 March. Springer International Publishing. pp. 317 - 322. ISSN: 2367-1181
Nadendla, HB., Nowak, M. and Bolzoni, L. (2016) 'Grain refiner for Al-Si alloys'. Springer International Publishing. pp. 1009 - 1012. ISSN: 2367-1181
Lebon, GSB., Tzanakis, I., Pericleous, K. and Eskin, D. (2016) 'A high-order acoustic cavitation model for the treatment of a moving liquid metal volume'. Springer International Publishing. pp. 135 - 142. ISSN: 2367-1181
Tzanakis, I., Lebon, GSB., Eskin, DG. and Pericleous, K. (2016) 'Optimization of the ultrasonic processing in a melt flow'. TMS Light Metals. pp. 833 - 836. ISSN: 0147-0809
Zhang, L., Eskin, DG., Miroux, A. and Katgerman, L. (2016) 'Formation of microstructure in Al-Si alloys under ultrasonic melt treatment'. Springer International Publishing. pp. 999 - 1004.