BCAST
View our websiteMen, H., Fu, J., Ma, C., Pang, S. and Zhang, T. (2007) 'Bulk glass formation in ternary Cu-Zr-Ti system'. Journal of University of Science and Technology Beijing: Mineral Metallurgy Materials (Eng Ed), 14 (SUPPL. 1). pp. 19 - 22. ISSN: 1005-8850
Tian, W., Pang, S., Men, H., Ma, C. and Zhang, T. (2007) 'Mg-Cu-Zn-Y-Zr bulk metallic glassy composite with high strength and plasticity'. Journal of University of Science and Technology Beijing: Mineral Metallurgy Materials (Eng Ed), 14 (SUPPL. 1). pp. 43 - 45. ISSN: 1005-8850
Zhang, Y., Ma, N. and Wang, H. (2007) 'Effect of particulate/Al interface on the damping behavior of in situ TiB2 reinforced aluminium composite'. Materials Letters, 61 (14-15). pp. 3273 - 3275. ISSN: 0167-577X
Zhang, T. and Men, H. (2007) 'Plastic deformability and precipitation of nanocrystallites during compression for a Cu-Zr-Ti-Sn bulk metallic glass'. Journal of Alloys and Compounds, 434-435 (SPEC. ISS.). pp. 10 - 12. ISSN: 0925-8388
Vanderbemden, P., Hong, Z., Coombs, TA., Denis, S., Ausloos, M., Schwartz, J., et al. (2007) 'Behavior of bulk high-temperature superconductors of finite thickness subjected to crossed magnetic fields: Experiment and model'. Physical Review B - Condensed Matter and Materials Physics, 75 (17). ISSN: 1098-0121
Coleman, AJ., McMurray, HN., Williams, G. and Scamans, GM. (2007) 'Scanning Kelvin probe studies of filiform corrosion on automotive aluminum alloy AA6016'. Journal of The Electrochemical Society, 154 (7). pp. C339 - C348. ISSN: 0013-4651
Huai, KW., Guo, JT., Gao, Q., Li, HT. and Yang, R. (2007) 'Microstructure and mechanical behavior of NiAl-based alloy prepared by powder metallurgical route'. Intermetallics, 15 (5-6). pp. 749 - 752. ISSN: 0966-9795
Pang, SJ., Men, H., Shek, CH., Ma, C., Inoue, A. and Zhang, T. (2007)
'Formation, thermal stability and corrosion behavior of glassy Ti
Fan, Z. (2007) 'Melting moments'. MATERIALS WORLD, 15 (5). pp. 25 - 26. ISSN: 0967-8638
Scamans, G. (2007) 'Aluminium - From cans to cars'. Materials World, 15 (5). pp. 28 - 30. ISSN: 0967-8638
Li, HT., Guo, JT. and Ye, HQ. (2007) 'Composition dependence of the precipitation behavior in NiAl-Cr(Mo)-(Ti,Hf) near eutectic alloys'. Materials Science and Engineering: A, 452-453. pp. 763 - 772. ISSN: 0921-5093
Huang, Y. and Humphreys, FJ. (2007) 'Evolution of microstructure and texture during cryogenic temperature deformation in an ultra-fine grained Al-0.13Mg alloy'.MRS EBSD Symposium 2007. Sheffield, UK. 1 - 2 April. [unpublished]
Gandin, CA. and Jacot, A. (2007) 'Modeling of precipitate-free zone formed upon homogenization in a multi-component alloy'. Acta Materialia, 55 (7). pp. 2539 - 2553. ISSN: 1359-6454
Fan, Z., Liu, G. and Wang, Y. (2007) 'Solidification behaviour under intensive forced convection'. Transactions of the Indian Institute of Metals, 60 (2-3). pp. 161 - 166. ISSN: 0019-493X
Varsani, V. and Fan, Z. (2007) 'Non-Newtonian behaviour of liquid metals'. Transactions of the Indian Institute of Metals, 60 (2-3). pp. 251 - 256. ISSN: 0019-493X
Zhang, T., Men, H., Pang, SJ., Fu, JY., Ma, CL. and Inoue, A. (2007) 'Effects of a minor addition of Si and/or Sn on formation and mechanical properties of Cu-Zr-Ti bulk metallic glass'. Materials Science and Engineering: A, 449-451. pp. 295 - 298. ISSN: 0921-5093
Men, H., Pang, SJ. and Zhang, T. (2007) 'Thermal stability and microhardness of new Co-based bulk metallic glasses'. Materials Science and Engineering: A, 449-451. pp. 538 - 540. ISSN: 0921-5093
Squire, PJ. and Chang, ITH. (2007) 'Development of rapidly solidified Al-Y-Ni-based alloys'. Materials Science and Engineering: A, 449-451. pp. 1009 - 1012. ISSN: 0921-5093
Coleman, AJ., McMurray, HN., Williams, G., Afseth, A. and Scamans, GM. (2007) 'Inhibition of filiform corrosion on AA6111-T4 using in-coating phenylphosphonic acid'. Electrochemical and Solid-State Letters, 10 (5). pp. 35 - 38. ISSN: 1099-0062
Prangnell, PB., Huang, Y., Berta, M. and Apps, P. (2007) 'Mechanisms of formation of submicron grain structures by severe deformation'. Materials Science Forum, 550. pp. 159 - 168. ISSN: 0255-5476
Katgerman, DL. and Eskin, DG. (2007) 'In search of the prediction of hot cracking in aluminium alloys'.2nd International Workshop on Hot Cracking Phenomena in Welds. Berlin, GERMANY. 5 - 6 March. Springer Berlin Heidelberg. pp. 3 - 18.
Huang, Y. and Prangnell, PB. (2007) 'Continuous frictional angular extrusion and its application in the production of ultrafine-grained sheet metals'. Scripta Materialia, 56 (5). pp. 333 - 336. ISSN: 1359-6462
Danilidis, I., Hunter, J., Scamans, GM. and Sykes, JM. (2007) 'Effects of inorganic additions on the performance of manganese-based conversion treatments'. Corrosion Science, 49 (3). pp. 1559 - 1569. ISSN: 0010-938X
Du, Q., Eskin, DG., Jacot, A. and Katgerman, L. (2007) 'Two-dimensional modelling and experimental study on microsegregation during solidification of an Al-Cu binary alloy'. Acta Materialia, 55 (5). pp. 1523 - 1532. ISSN: 1359-6454
Li, HT., Guo, JT., Huai, KW. and Ye, HQ. (2007) 'Microstructural characteristics and thermal stability of a NiAl-based near-eutectic alloy fabricated by water-cooled copper mold method'. Materials Characterization, 58 (3). pp. 296 - 302. ISSN: 1044-5803
Fan, Z., Ji, S., Fang, X., Liu, G., Patel, J. and Das, A. (2007) 'Development of rheo-diecasting (RDC) process for production of high integrity components'.2nd International Symposium on Shape Casting held at the 2007 TMS Annual Meeting. Orlando, FL. 25 - 1 March. MINERALS, METALS & MATERIALS SOC. pp. 299 - 306.
Das, A. and Fan, Z. (2007) 'Monte carlo simulation of growth of solid under forced fluid flow'.Symposium on Materials Processing Under the Influence of External Fields held at the 2007 TMS Annual Meeting. Orlando, FL. 25 - 1 March. MINERALS, METALS & MATERIALS SOC. pp. 213 - 222.
Das, A., Fan, Z., Liu, G., Wang, Y. and Ji, S. (2007) 'Rheo-diecasting of magnesium alloys'.Symposium on Magnesium Technology held at the TMS Annual Meeting and Exhibition. Orlando, FL. 25 - 1 March. MINERALS, METALS & MATERIALS SOC. pp. 227 - 232. ISSN: 1545-4150
Fan, Z., Liu, G., Hitchcock, M. and Das, A. (2007) 'Solidification behaviour under intensive forced convection'.Symposium on Materials Processing Under the Influence of External Fields held at the 2007 TMS Annual Meeting. Orlando, FL. 25 - 1 March. MINERALS, METALS & MATERIALS SOC. pp. 201 - 212.
Turchin, AN., Eskin, DG., Courtenay, JH. and Katgerman, L. (2007) 'Computer simulations of melt flow and particle removal in the cyclone'.Symposium on Light Metals held at the 2007 TMS Annual Meeting and Exhibition. Orlando, FL. 25 - 1 March. MINERALS, METALS & MATERIALS SOC. pp. 615 - 620. ISSN: 0147-0809
Fan, Z., Ji, S., Wang, Y., Das, A. and Zhang, S. (2007) 'Rheoforming technologies for processing wrought Mg-alloys'.Symposium on Magnesium Technology held at the TMS Annual Meeting and Exhibition. Orlando, FL. 25 - 1 March. MINERALS, METALS & MATERIALS SOC. pp. 233 - 238. ISSN: 1545-4150
Li, HT., Guo, JT., Huai, KW. and Ye, HQ. (2007) 'Preliminary investigation on solid solution softening effects on NiAl based alloys induced by minor Ru alloying addition'. Materials Science and Technology, 23 (2). pp. 189 - 194. ISSN: 0267-0836
Ji, S., Liu, G., Wang, Y. and Fan, Z. (2007) 'Microstructure and mechanical properties of rheo-diecast Mg-alloys'.7th international conference on magnesium alloys and their applications. Dresden, Germany. 1 - 9 September. Wiley-VCH. pp. 256 - 261.
Jacot, A. and Rostamian, A. (2007) 'A numerical model for the description of massive and lamellar microstructure formation in gamma-TiAl'.5th International Conference on Processing and Manufacturing of Advanced Materials. Vancouver, CANADA. 1 - 8 July. Trans Tech Publications, Ltd.. pp. 1481 - 1486. ISSN: 0255-5476
Du, Q., Eskin, DG. and Katgerman, L. (2007) 'Modeling macrosegregation during direct-chill casting of multicomponent aluminum alloys'. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 38 (1). pp. 180 - 189. ISSN: 1073-5623
Fang, CM., Ahuja, R. and Eriksson, O. (2007) 'Prediction of MAX phases, VN+1SiCN (N=1,2), from first-principles theory'. Journal of Applied Physics, 101 (1). ISSN: 0021-8979
Soleimani, S., Abdollah-Zadeh, A., Samadi, A. and Assadi, H. (2007) 'A study of growth kinetics and distribution of χ precipitates in an induction-aged nickel-base superalloy'.5th International Romanian Conference on Advanced Materials. Bucharest, ROMANIA. 1 - 14 September. NATL INST OPTOELECTRONICS. pp. 1789 - 1792. ISSN: 1454-4164
McKay, BJ., Robson, JD., Pragnell, PB. and Heason, CP. (2007) 'Modelling the precipitation of Al3X dispersoids in aluminium alloys and their effect on recrystallization'. Materials Science Forum, 550. pp. 45 - 54. ISSN: 0255-5476
Prangnell, PB., Huang, Y., Berta, M. and Apps, PJ. (2007) 'Mechanisms of formation of submicron grain structures by severe deformation'. Trans Tech Publications Ltd.. pp. 159 - 168. ISSN: 0255-5476
Guo, JT., Huai, KW. and Li, HT. (2007) 'Significant improvement of mechanical properties in NiAl-Cr(Mo)/Hf alloy by suction casting and subsequent hot isostatic pressing'. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 38A (1). pp. 35 - 43. ISSN: 1073-5623
Katgerman, L. and Eskin, DG. (2007) 'Contraction behaviour of aluminium alloys during solidification'. Internation Foundry Research, 59 (2). pp. 8 - 13.
Eskin, D., Nadella, R. and Katgerman, L. (2007) 'Role of grain refinement in hot tearing and macrosegregation in direct-chill cast AA7075 billets'. Materials Science and Technology, 23 (11). pp. 1327 - 1335. ISSN: 0267-0836
Iida, K., Babu, NH., Shi, Y., Matthews, LS., Miyazaki, T., Sakai, N., et al. (2007) 'Phase stability of MgO-doped Nd-Ba-Cu-O seed crystals for cold-seeded, OCMG processing'. Physica C: Superconductivity, 463 (SUPPL.). pp. 340 - 343. ISSN: 0921-4534
Du, Q., Eskin, DG. and Katgerman, L. (2007) 'Modeling Macrosegregation during Direct-Chill Casting of Multicomponent Aluminum Alloys'. Metallurgical and Materials Transactions A, 38 (1). pp. 180 - 189. ISSN: 1073-5623
Tang, H., Wrobel, LC. and Fan, Z. (2007) 'Flow features and industrial applications of TSE rheoextrusion process'. Fluid Dynamics and Materials Processing, 3 (2). pp. 129 - 146. ISSN: 1555-256X Open Access Link
Shi, Y., Hari Babu, N., Iida, K. and Cardwell, DA. (2007) 'Properties of GdBCO bulk superconductors melt-processed in air using a Mg-doped Nd-Ba-Cu-O generic seed crystal'. Superconductor Science and Technology, 20 (1). pp. 38 - 43. ISSN: 0953-2048
Liu, Y., Zhou, X., Thompson, GE., Hashimoto, T., Scamans, GM. and Afseth, A. (2007) 'Precipitation in an AA6111 aluminium alloy and cosmetic corrosion'. Acta Materialia, 55 (1). pp. 353 - 360. ISSN: 1873-2453
Hitchcock, M., Wang, Y. and Fan, Z. (2007) 'Secondary solidification behaviour of the Al-Si-Mg alloy prepared by the rheo-diecasting process'. Acta Materialia, 55 (5). pp. 1589 - 1598. ISSN: 1359-6454
Fang, X., Shao, G., Liu, YQ. and Fan, Z. (2007) 'Effects of intensive forced melt convection on the mechanical properties of Fe containing Al-Si based alloys'. Materials Science and Engineering: A, 445-446. pp. 65 - 72. ISSN: 0921-5093
Fang, X. and Fan, Z. (2007) 'A novel approach to produce Al-alloy foams'. Journal of Materials Science, 42 (18). pp. 7894 - 7898. ISSN: 0022-2461
Fu, J., Men, H., Pang, S., Ma, C. and Zhang, T. (2007) 'Formation and thermal stability of Cu-Zr-Al-Er bulk metallic glasses with high glass-forming ability'. Journal of University of Science and Technology Beijing: Mineral Metallurgy Materials (Eng Ed), 14 (SUPPL. 1). pp. 36 - 38. ISSN: 1005-8850