IMM
Kalganova, T., Adedoyin, S., Fernando, WAC. and Kodikara Arachchi, H. (2005) 'An Efficient Motion Estimation Algorithm for H.264 Based Conversational Video Codecs'.WPMC'05. Aalborg, Denmark. TIB/UB Hannover. pp. 1370 - 1374.Open Access Link
Zong, WJ., Li, D., Sun, T., Cheng, K. and Liang, YC. (2005) 'Machine vibration influence on lapping quality of ultra-precision diamond cutting tools'. Hangkong Xuebao/Acta Aeronautica et Astronautica Sinica, 26 (3). pp. 367 - 370. ISSN: 1000-6893
Ji, S., Qian, M. and Fan, Z. (2005) 'Solidification microstructure and mechanical properties of AM series Mg-alloys processed by rheo-diecasting'.Solidification Processing 2007. Sheffield. Proceedings of the 5th decennial international conference on solidification processing. pp. 605 - 609.
Silver, J., Withnall, R., Rose, J., Wilstead, N., Fern, G., Bishton, S., et al. (2005) 'Broad-band green phosphor screens as a light source for head up displays in moving platforms'.Opto-Ireland 2005 Conference. Dublin, Ireland. 5 - 6 April. SPIE. pp. 537 - 544. ISSN: 0277-786X
Withnall, R., Silver, J., Wilstead, N., Ireland, TG., Fern, GR., Klein, D., et al. (2005) 'The use of a novel phosphor screen for visualising the infrared beam of a gas detector'.Opto-Ireland 2005 Conference. Dublin, Ireland. 5 - 6 April. SPIE. pp. 425 - 436. ISSN: 0277-786X
Suyitno., Eskin, DG. and Katgerman, L. (2005) 'Thermal contraction of AA5182 for prediction of ingot distortions'.6th International Conference on Fracture and Strength of Solids. Bali, INDONESIA. 4 - 6 April. TRANS TECH PUBLICATIONS LTD. pp. 977 - 982. ISSN: 1013-9826
Bonser, R. (2005) 'A design for life'. Materials World, 13 (4). pp. 21. ISSN: 0967-8638
Li, D., Wang, HX., Zong, WJ., Cheng, K. and Li, FY. (2005) 'Numerical simulation for elastic recovery of ultra-precision machined surface of OFHC copper'. Transactions of Nonferrous Metals Society of China (English Edition). pp. 199 - 203. ISSN: 1003-6326
Waite, AM., Lloyd, NS., Osman, K., Zhang, W., Ernst, T., Achard, H., et al. (2005) 'Raised source/drains for 50 nm MOSFETs using a silane/dichlorosilane mixture for selective epitaxy'. Solid-State Electronics, 49 (4). pp. 529 - 534. ISSN: 0038-1101
El Mubarek, HAW., Karunaratne, M., Bonar, JM., Dilliway, GD., Wang, Y., Hemment, PLF., et al. (2005)
'Effect of fluorine implantation dose on boron transient enhanced diffusion and boron thermal diffusion in Si
Zhang, E. and Wang, B. (2005) 'On the compressive behaviour of sintered porous coppers with low to medium porosities - Part I: Experimental study'. International Journal of Mechanical Sciences, 47 (4-5 SPEC. ISS.). pp. 744 - 756. ISSN: 0020-7403
Holland, R. and Ariyatum, B. (2005) 'Developing a multi-cultural learning environment for design management education'.10th Network of International Business Schools (NIBS) Conference: Multicultural Management in Education. Rennes, France. [unpublished]
Shi, Y., Babu, NH. and Cardwell, DA. (2005) 'Development of a generic seed crystal for the fabrication of large grain (RE)-Ba-Cu-O bulk superconductors'. Superconductor Science and Technology, 18 (4). pp. L13 - L16. ISSN: 0953-2048
Mikhailov, SE. and Namestnikova, IV. (2005) 'Application of damage mechanics in percussive drilling modelling'.11th International Conference on Fracture. Turin, Italy. 20 - 25 March. 11th International Conference on Fracture 2005, ICF11. pp. 444 - 451.Open Access Link
Parente, MPL., Fontes Valente, RA., Natal Jorge, RM., Cardoso, RP. and Alves de Sousa, RJ. (2005) 'Fully-Integrated EAS-Based Solid-Shell Finite Elements in Implicit Sheet Metal Forming Simulations'.NUMISHEET2005, 6th International Conference and Workshop on Numerical Simulation of 3D Sheet Forming Processes.
Alves de Sousa, RJ., Cardoso, RP., Fontes Valente, RA., Yoon, JW., Gracio, JJ. and Natal Jorge, RM. (2005) 'Development of a One Point Quadrature EAS Solid-Shell Element for Sheet Forming Processes'.NUMISHEET2005, 6th International Conference and Workshop on Numerical Simulation of 3D Sheet Forming Processes.
Cardoso, RP. and Yoon, JW. (2005) 'One Point Quadrature Shell Element With Through-Thickness Stretch'.NUMISHEET2005, 6th International Conference and Workshop on Numerical Simulation of 3D Sheet Forming Processes.
Cheng, K. (2005) 'E-manufacturing'. ISSN 10: 1853129984 ISSN 13: 9781853129988
MIKHAILOV. (2005) 'Localized direct boundary–domain integro–differential formulations for scalar nonlinear problems with variable coefficients'. Journal of Engineering Mathematics, 51 (3). pp. 283 - 302. ISSN: 0022-0833
Iida, K., Babu, NH., Reddy, ES., Shi, YH. and Cardwell, DA. (2005)
'The effect of nano-size ZrO
Grant, S. (2005) '"Supply Chain restructuring in UK Aerospace"'.Marketing Management Association Conference. Chicago USA. [unpublished]
Bain, M., El Mubarek, HAW., Bonar, JM., Wang, Y., Buiu, O., Gamble, H., et al. (2005) 'SiGe HBTs on bonded SOI incorporating buried silicide layers'. IEEE Transactions on Electron Devices, 52 (3). pp. 317 - 324. ISSN: 0018-9383
Alves de Sousa, R., Cardoso, RP., Valente, RAF., Yoon, JW., Gracio, JJ. and Natal Jorge, RM. (2005) 'A new one-point quadrature Enhanced Assumed Strain solid-shell element with multiple integration points along thickness Part I - Geometrically Linear Applications'. International Journal for Numerical Methods in Engineering, 62 (7). pp. 952 - 977. ISSN: 0029-5981
Yang, Q. (2005) 'Models of the sensor interface', in Sydenham, P. and Thorn, R. (eds.) Handbook of measuring system design. Wiley. , 2. ISBN 10: 0470021438. ISBN 13: 9780470021439. Open Access Link
McKay, BJ. and Schumacher, P. (2005) 'Heterogeneous nucleation mechanisms of TiB particles in Al alloys', in Tiryakioglu, M. and Crepeau, PN. (eds.) MINERALS, METALS & MATERIALS SOC. pp. 155 - 164. ISBN 10: 0-87339-583-2.
Turchin, AN., Eskin, DG. and Katgerman, L. (2005) 'Interaction between structure formation and melt flow during solidification: First results on experiments with electromagnetic pump'.Technical Session on Light Metals 2005 held at the 134th TMS Annual Meeting. San Francisco, CA. 13 - 17 February. MINERALS, METALS & MATERIALS SOC. pp. 1025 - 1029. ISSN: 0147-0809
Stephan, EP. and Maischak, M. (2005) 'A posteriori error estimates for fem-bem couplings of three-dimensional electromagnetic problems'. Computer Methods in Applied Mechanics and Engineering, 194 (2-5 SPEC. ISS.). pp. 441 - 452. ISSN: 0045-7825
Maischak, M. and Stephan, EP. (2005) 'A FEM-BEM coupling method for a nonlinear transmission problem modelling Coulomb friction contact'. Computer Methods in Applied Mechanics and Engineering, 194 (2-5 SPEC. ISS.). pp. 453 - 466. ISSN: 0045-7825
Whiteman, J. and Demkowicz, L. (2005) 'Preface'. Computer Methods in Applied Mechanics and Engineering, 194 (2-5 SPEC. ISS.). pp. iii - iv. ISSN: 0045-7825
Karamanou, M., Shaw, S., Warby, MK. and Whiteman, JR. (2005) 'Models, algorithms and error estimation for computational viscoelasticity'. Computer Methods in Applied Mechanics and Engineering, 194 (2-5). pp. 245 - 265. ISSN: 0045-7825
El Mubarek, HAW., Wang, Y., Price, R., Bonar, JM., Zhang, J., Hemment, PLF. and et al. (2005) 'Suppression of boron transient enhanced diffusion in silicon and silicon germanium by fluorine implantation'. Materials Science in Semiconductor Processing, 8 (1-3 SPEC. ISS.). pp. 103 - 109. ISSN: 1369-8001
Ambrosi, MR., Smith, DR., Abbey, AF., Hutchinson, IB., Kendziorra, E., Short, A., et al. (2005) 'Erratum: The impact of low energy proton damage on the operational characteristics of EPIC-MOS CCDs (Nuclear Instruments and Methods in Physics Research B (2003) 207 (175-185) DOI:10.1016/S0168-583X(03)008832.2)'. Nuclear Instruments and Methods in Physics Research, Section B: Beam Interactions with Materials and Atoms, 229 (1). pp. 159. ISSN: 0168-583X
Reddy, ES., Hari Babu, N., Shi, Y., Cardwell, DA. and Schmitz, GJ. (2005) 'Processing of large grain Y-123 superconductors with pre-defined porous structures'. Superconductor Science and Technology, 18 (2). pp. S15 - S18. ISSN: 0953-2048
Babu, NH., Kambara, M., Reddy, ES., Shi, Y. and Cardwell, DA. (2005)
'Improved magnetic flux pinning in melt processed (Y, Nd)Ba
Cardwell, DA., Murakami, M., Zeisberger, M., Gawalek, W., Gonzalez-Arrabal, R., Eisterer, M., et al. (2005) 'Round robin tests on large grain melt processed Sm-Ba-Cu-O bulk superconductors'. Superconductor Science and Technology, 18 (2). pp. S173 - S179. ISSN: 0953-2048
Zhou, X. and Li, Z. (2005) 'Characterizing rheology of fresh short fiber reinforced cementitious composite through capillary extrusion'. Journal of Materials in Civil Engineering, 17 (1). pp. 28 - 35. ISSN: 0899-1561
Gan, TH., Hutchins, DA., Green, RJ., Andrews, MK. and Harris, PD. (2005) 'Noncontact, high-resolution ultrasonic imaging of wood samples using coded chirp waveforms'. IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, 52 (2). pp. 280 - 287. ISSN: 0885-3010
Yong, X., Chang, IT. and Jones, IP. (2005) 'Formation of a quasicrystalline phase in mechanically alloyed A165Cu25Fe15'. Journal of Alloys and Compounds, 387 (1-2). pp. 128 - 133. ISSN: 0925-8388
Yang, Q. (2005) 'Signals, information and knowledge and meaning', in Sydenham, P. and Thorn, R. (eds.) Handbook of measuring system design. , 1. ISBN 10: 0470021438. ISBN 13: 9780470021439. Open Access Link
Alves de Sousa, RJ., Cardoso, RP., Fontes Valente, RA., Yoon, JW., Gracio, JJ. and Natal Jorge, RM. (2005) 'Development of a One Point Quadrature EAS Solid-Shell Element for Sheet Forming Processes'.8th ESAFORM Conference on Material Forming.
Parente, MPL., Fontes Valente, RA., Natal Jorge, RM., Cardoso, RP. and Alves de Sousa, RJ. (2005) 'Sheet Metal Forming Simulation Using EAS Solid-Shell Finite Elements'.8th ESAFORM Conference on Material Forming.
Barrett, E., Fern, GR., Ray, B., Withnall, R. and Silver, J. (2005) 'UV photoluminescence from small particles of calcium cadmium sulfide solid solutions'. Journal of Optics A: Pure and Applied Optics, 7 (6). pp. S265 - S269. ISSN: 1464-4258
Destrade, M., Ottenio, M., Pichugin, A. and Rogerson, GA. (2005) 'Non-principal surface waves in deformed incompressible materials'. International Journal of Engineering Science, 43 (13-14). pp. 1092 - 1106. ISSN: 0020-7225 Open Access Link
Kirby, R. and Lawrie, JB. (2005) 'A point collocation approach to modelling large dissipative silencers'. Journal of Sound and Vibration, 286 (1-2). pp. 313 - 339. ISSN: 0022-460X Open Access Link
de Cesare, S., Lycett, MG. and Macredie, RD. (2005) 'The development of component-based information systems: an introduction', in Cesare, SD., Lycett, MG. and Macredie, RD. (eds.) The Development of Component-Based Information Systems. New York : ME Sharpe. pp. 3 - 20. ISBN 10: 0-7656-1248-8. ISBN 13: 9780765612489.
Stephan, EP. and Maischak, M. (2005) 'A posteriori error estimates for fem-bem couplings of three-dimensional electromagnetic problems'. Computer Methods in Applied Mechanics and Engineering, 194 (2-5). pp. 441 - 452. ISSN: 0045-7825
Mikhailov, SE. (2005) 'Analysis of boundary-domain integral and integro-differential equations for a Dirichlet problem with variable coefficient', in Constanda, C., Nashed, Z. and Rollins, D. (eds.) Integral Methods in Science and Engineering: Theoretical and Practical Aspects. Birkhäuser. pp. 161 - 176. ISBN 10: 081764377X. ISBN 13: 978-0817643775. Open Access Link
Collins, MW., Atherton, MA. and Bryant, JA. (2005) 'Nature and design'. Southampton, UK: WIT Press. ISSN 13: 978-1-85312-852-3
Stomeo, E., Kalganova, T. and Lambert, C. (2005) 'Mutation Rate for Evolvable Hardware.'.5th International Enformatika Conference (IEC 05). Citeseer. CEMAL ARDIL-IEC BARBAROS MAH HASRET SITESI. pp. 117 - 124.
Liu, YQ., Qian, M. and Fan, Z. (2005) 'Microstructure and mechanical properties of a rheo-diecast Mg-10Zn-4.5Al alloy'. Materials Transactions, 46 (10). pp. 2221 - 2228. ISSN: 1345-9678
Luo, XK., Cheng, K., Luo, XC. and Liu, XW. (2005) 'A simulated investigation on the machining instability and dynamic surface generation'. The International Journal of Advanced Manufacturing Technology, 26 (7-8). pp. 718 - 725. ISSN: 0268-3768 Open Access Link