Lordan, E., Lazaro Nebreda, J., Zhang, Y. and Fan, Z. (2018) 'Effective Degassing for Reduced Variability in High-Pressure Die Casting Performance'. JOM, 71 (2). pp. 824 - 830. ISSN: 1047-4838 Open Access Link

Al-Dujele, R., Cashell, KA. and Afshan, S. (2018) 'Flexural behaviour of concrete filled tubular flange girders'. Journal of Constructional Steel Research, 151. pp. 263 - 279. ISSN: 0143-974X Open Access Link

Yang, Q. (2018) 'Small Mixed-batch SPC'. Brunel University London.

Yang, Q. (2018) 'Overview of Quality Engineering Management and Application Case Studies'. Brunel University London.

Miranda, A., Barekar, N. and McKay, B. (2018) 'MWCNTs and its use in Al-MMCs for Ultra-High Thermal Conductivity Applications: A Review'. Journal of Alloys and Compounds, 774. pp. 820 - 840. ISSN: 1873-4669

Cardoso, RP. (2018) 'Stress Analysis for Lightweight Structures: A Matlab Oriented Approach'. CreateSpace Independent Publishing. ISSN 13: 9781721133635

Pedram, SK., Mudge, P. and Gan, TH. (2018) 'Enhancement of ultrasonic guided wave signals using a split-spectrum processing method'. Applied Sciences (Switzerland), 8 (10). pp. 1 - 17. ISSN: 2076-3417 Open Access Link

Zhang, B., Li, S., Huang, Z., Rahi, BH., Wang, Q. and Li, M. (2018) 'Transfer learning-based online multiperson tracking with Gaussian process regression'. Concurrency Computation, 30 (23). ISSN: 1532-0626 Open Access Link

Abdallah, S., Fan, M. and Rees, DWA. (2018) 'Predicting pull-out behaviour of 4D/5D hooked end fibres embedded in normal-high strength concrete'. Engineering Structures, 172. pp. 967 - 980. ISSN: 0141-0296

Alabi, AA., Moore, PL., Wrobel, LC., Campbell, JC. and He, W. (2018) 'Influence of Loading Rate on the Fracture Toughness of High Strength Structural Steel'.22nd European Conference on Fracture. Belgrade, Serbia. 1 - 31 August. Elsevier BV. pp. 877 - 885. ISSN: 2452-3216 Open Access Link

Lam, B. and Pitsaki, I. (2018) 'Co‐Design for the Development of New Knowledge and Practices in Not‐for‐Profit Organizations'. Design Management Journal, 13 (1). pp. 70 - 82. ISSN: 1942-5074

Khan, MA., Jiang, L., Cashell, KA. and Usmani, A. (2018) 'Analysis of restrained composite beams exposed to fire using a hybrid simulation approach'. Engineering Structures, 172. pp. 956 - 966. ISSN: 0141-0296 Open Access Link

Anguilano, L., McKay, B., Minton, T., Barekar, N. and Adole, O. (Accepted) 'Method for Forming Metal Matrix Composites'.

Fang, CM., Men, H. and Fan, Z. (2018) 'Effect of Substrate Chemistry on Prenucleation'. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 49 (12). pp. 6231 - 6242. ISSN: 1073-5623 Open Access Link

Jovicic, G., Vukicevic, A., Filipovic, N., Djordjevic, N. and Vignjevic, R. (2018) 'Assessment of Structural Integrity of a Composite Mandibula under Impact Loading'.Second International Workshop on Dynamic Response of Composite Materials. Ischia, Italy. 27 - 28 September.

Rees, DWA. (2018) 'The Mechanics of Elastic Solids'. Wspc (Europe). ISSN 10: 1786346168 ISSN 13: 9781786346162

Wang, J., Andrews, P., Butler, C., McAlpine, E., Scamans, G. and Zhou, X. (2018) 'Optical cleanliness measurement methods for aluminium sheet surfaces'. Surface and Interface Analysis, 51 (12). pp. 1144 - 1153. ISSN: 0142-2421 Open Access Link

Dong, X., Yang, H., Zhu, X. and Ji, S. (2018) 'High strength and ductility aluminium alloy processed by high pressure die casting'. Journal of Alloys and Compounds, 773. pp. 86 - 96. ISSN: 0925-8388 Open Access Link

Eskin, DG. and Mi, J. (2018) 'Solidification Processing of Metallic Alloys Under External Fields'. Springer. ISSN 10: 3319948415 ISSN 13: 9783319948416

Eskin, D. (2018) 'Basics of solidification processing of metallic alloys', in Eskin, D. and Mi, J. (eds.) Solidification Processing of Metallic Alloys Under External Fields. Springer. pp. 1 - 17. ISBN 10: 3319948415. ISBN 13: 9783319948416.

Eskin, D. and Tzanakis, I. (2018) 'High frequency vibration and ultrasonic processing', in Eskin, D. and Mi, J. (eds.) Solidification Processing of Metallic Alloys Under External Fields. Springer. pp. 153 - 193. ISBN 10: 3319948415.

Dahlborg, U., Calvo-Dahlborg, M., Eskin, D. and Popel, P. (2018) 'Thermal melt processing of metallic alloys', in Eskin, D. and Mi, J. (eds.) Solidification Processing of Metallic Alloys Under External Fields. Springer. pp. 277 - 315. ISBN 10: 3319948415.

Fairclough, HE., Gilbert, M., Pichugin, A., Tyas, A. and Firth, I. (2018) 'Theoretically optimal forms for very long span bridges under gravity loading'. Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, 474 (2217). pp. 1 - 21. ISSN: 1364-503X Open Access Link

Adetoro, OB. (2018) 'Analytical friction model for sliding bodies with coupled longitudinal and transverse vibration'.6th Asia International Conference on Tribology (ASIATRIB2018). Kuching, Sarawak - Malaysia. 17 - 20 September. Proceedings of the 6th Asia International Conference on Tribology, pp. 1-2, September 2018.Open Access Link

Lu, KJ. (2018) 'Decision Making under Uncertainty through Extending Influence Diagrams with Interval-valued Parameters'. Expert Systems: the journal of knowledge engineering, 35 (4). pp. 1 - 15. ISSN: 0266-4720 Open Access Link

Jiang, P., Atherton, M., Sorce, S., Harrison, D. and Malizia, A. (2018) 'Design for Invention: A framework for identifying emerging design-prior art conflict'. Journal of Engineering Design, 29 (10). pp. 596 - 615. ISSN: 0954-4828 Open Access Link

Alghababsheh, M., Gallear, D. and Rahman, M. (2018) 'Balancing the scales of justice: Do perceptions of buyers' justice drive suppliers' social performance?'. Jornal of Business Ethics, 163 (1). pp. 125 - 150. ISSN: 0167-4544 Open Access Link

Gong, C., Zhou, X., Dai, W., Liu, Y., Lu, L. and Cheng, X. (2018) 'Effects of carbamide on fluidity and setting time of sulphoaluminate cement and properties of planting concrete from sulphoaluminate cement'. Construction and Building Materials, 182. pp. 290 - 297. ISSN: 0950-0618

Kostan, M., Dhutti, A., Niu, X., Duan, W., Kourmpetis, M., Kanfoud, J. and Gan, TH. et al. (2018) 'Autonomous ice protection combining ultrasonic guided waves and electrothermal systems'.NDT 2018 - 57th Annual British Conference on Non-Destructive Testing. Nottingham, UK. 10 - 12 September. Proceedings of the 57th Annual Conference of the British Institute of Non-Destructive Testing (NDT 2018). pp. 100 - 111.Open Access Link

Fras, J., Noh, Y., Macias, M., Wurdemann, H. and Althoefer, K. (2018) 'Bio-Inspired Octopus Robot Based on Novel Soft Fluidic Actuator'.2018 IEEE International Conference on Robotics and Automation (ICRA). Brisbane, AUSTRALIA. 10 - 25 May. IEEE. pp. 1583 - 1588. ISSN: 1050-4729

Winful, D., Cashell, KA., Afshan, S., Barnes, AM. and Pargeter, RJ. (2018) 'Behaviour of high strength steel columns under fire conditions'. Journal of Constructional Steel Research, 150. pp. 392 - 404. ISSN: 0143-974X Open Access Link

den Engelsen, D., Fern, GR., Ireland, TG., Hudry, D., Abeykoon, AMM., Nykypanchuk, D., Dickerson, JH. and Silver, J. et al. (2018) 'Ultrathin Y2O3:Eu³⁺nanodiscs: Spectroscopic investigations and evidence for reduced concentration quenching'. Nanotechnology, 29 (45). pp. 1 - 14. ISSN: 0957-4484 Open Access Link

Bhagurkar, AG., Yamamoto, A., Wang, L., Xia, M., Dennis, AR., Durrell, JH., Aljohani, TA., Hari Babu, N. and Cardwell, DA. et al. (2018) 'High Trapped Fields in C-doped MgB2 Bulk Superconductors Fabricated by Infiltration and Growth Process'. Scientific Reports, 8 (1). pp. 1 - 12. ISSN: 2045-2322 Open Access Link

Wang, J., Yang, H., Liu, Z., Ji, S., Li, R. and Ruan, J. (2018) 'A novel Fe 40 Mn 40 Cr 10 Co 10 /SiC medium-entropy nanocomposite reinforced by the nanoparticles-woven architectural structures'. Journal of Alloys and Compounds, 772. pp. 272 - 279. ISSN: 0925-8388 Open Access Link

Liu, Y., Xu, Y. and Qin, S. (2018) 'What are key components when creating an innovative Crowdsourcing business model'. 2018 24TH IEEE INTERNATIONAL CONFERENCE ON AUTOMATION AND COMPUTING (ICAC' 18). pp. 91 - 94.

Al-Sadawi, L., Chong, TP. and Kim, J-H. (2018) 'Aerodynamic noise reduction by plasma actuators for a flat plate with blunt trailing edge'. Journal of Sound and Vibration, 439. pp. 173 - 193. ISSN: 0022-460X Open Access Link

Tanaka, M., Cardoso, RP. and Bahai, H. (2018) 'Modification of the LSMPS Method for the conservation of the thermal energy in laser irradiation processes'. International Journal for Numerical Methods in Engineering, 117 (2). pp. 161 - 187. ISSN: 0029-5981 Open Access Link

Nobariyan, B., Amini, N., Daneshvar, S. and Abbasi, A. (2018) 'A novel architecture of medical image fusion based on YCbCr-DWT transform'. International Arab Journal of Information Technology, 15 (5). pp. 850 - 856. ISSN: 1683-3198

Scamans, G. (2018) 'Electric vehicles spike demand for high strength aluminum extrusions'. Light Metal Age, 76 (5). pp. 6 - 12. ISSN: 0024-3345

Vojdani, A., Farrahi, GH., Mehmanparast, A. and Wang, B. (2018) 'Probabilistic Assessment of Creep-Fatigue Crack Propagation in Austenitic Stainless Steel Cracked Plates'. Engineering Fracture Mechanics, 200. pp. 50 - 63. ISSN: 0013-7944 Open Access Link

Liu, Y., Xu, Y. and Qin, S. (2018) 'What are key components when creating an innovative crowdsourcing business model'.The 24th International Conference on Automation & Computing. Newcastle University. 1 - 7 September. IEEE. pp. 1 - 4.Open Access Link

Jansen, G., Dehouche, Z., Corrigan, H. and Bonser, R. (2018) 'An Autonomous Solar PV/Wind/Regenerative Hydrogen Fuel Cell Energy Storage System for Cell Towers', in Shao, H. (ed.) Hydrogen Storage Preparation, Applications and Technology. Hauppauge, New York, USA : Nova Science Publishers. pp. 225 - 266. ISBN 10: 1536142204. ISBN 13: 978-1-5361-4220-4. Open Access Link

Duan, W., Kanfoud, J., Deere, M., Mudge, P. and Gan, T-H. (2018) 'Spectral subtraction and enhancement for torsional waves propagating in coated pipes'. NDT and E International, 100. pp. 55 - 63. ISSN: 0963-8695 Open Access Link

Dissanayake, M., Sattar, TP., Lowe, S., Pinson, I. and Gan, TH. (2018) 'Adaptable legged-magnetic adhesion tracked wheel robotic platform for misaligned mooring chain climbing and inspection'. Industrial Robot, 45 (5). pp. 634 - 646. ISSN: 0143-991X Open Access Link

Wang, L., Wu, G., Wang, B. and Pisarski, H. (2018) 'Fracture response of X65 pipes containing circumferential flaws in the presence of Lüders plateau'. International Journal of Solids and Structures, 156-157. pp. 29 - 48. ISSN: 0020-7683 Open Access Link

Geng, H., Wang, Z., Cheng, Y., Alsaadi, FE. and Dobaie, AM. (2018) 'State estimation under non-Gaussian Lévy and time-correlated additive sensor noises: A modified Tobit Kalman filtering approach'. Signal Processing, 154. pp. 120 - 128. ISSN: 0165-1684

Maier, P., Bechly, M., Mendis, CL. and Hort, N. (2018) 'Precipitation hardening on mechanical and corrosion properties of extruded Mg10Gd modified with Nd and La'. Metals, 8 (8). pp. 1 - 14. ISSN: 2075-4701 Open Access Link

Yang, W., Ji, S., Zhang, R., Zhang, J. and Liu, L. (2018) 'Abnormal Grain Refinement Behavior in High-Pressure Die Casting of Pure Mg with Addition of Zr as Grain Refiner'. JOM, 70 (11). pp. 2555 - 2560. ISSN: 1047-4838 Open Access Link

Kastiukas, G., Zhou, X., Lantieri, C., Tataranni, P., Vaiana, R. and Sangiorgi, C. (2018) 'Mechanical and Thermal Performance of Macro-Encapsulated Phase Change Materials for Pavement Application'. Materials, 11 (8). pp. 1398 - 1398. ISSN: 1996-1944 Open Access Link

Cardoso, RP. and Adetoro, OB. (2018) 'Generalisation of Hill's Yield Function for Planar Plastic Anisotropy'.The 11th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes, NUMISHEET2018. Tokyo, JAPAN. 6 - 3 August. IOP Publishing. pp. 012112 - 012112. ISSN: 1742-6588

Zhang, Y., Patel, JB., Wang, Y. and Fan, Z. (2018) 'Variation improvement of mechanical properties of Mg-9Al-1Zn alloy with melt conditioned high pressure die casting'. Materials Characterization, 144. pp. 498 - 504. ISSN: 1044-5803 Open Access Link