IMM
Turner, RJ., Taylor, EA., Mcdonnell, JAM., Stokes, H., Marriott, P., Wilkinson, J., et al. (2001) 'Cost effective honeycomb and multi-layer insulation debris shields for unmanned spacecraft'. International Journal of Impact Engineering, 26 (1-10). pp. 785 - 796. ISSN: 0734-743X
Fang, CM., De With, G. and Parker, SC. (2001)
'Computer Simulation of Dissociative Adsorption of Water on the Surfaces of Spinel MgAl
Lim, J., Jackson, PR., Yang, Q. and Jones, BE. (2001) 'Optically powered hydraulic pilot valve using piezoelectric multilayer actuator'. International Journal of Fluid Power, 2 (3). pp. 15 - 21. ISSN: 1439-9776
Nakayama, K., Qi, K. and Hu, X. (2001) 'Dynamic mechanical properties of rolled polypropylene sheets'. Polymers and Polymer Composites, 9 (3). pp. 151 - 156. ISSN: 0967-3911
Jones, E., Mann, D., Harrison, D. and Stanton, N. (2001) 'An eco-innovation case study of domestic dishwashing through the application of TRIZ tools'. Creativity and Innovation Management, 10 (1). pp. 3 - 14. ISSN: 0963-1690
Bourgeois, L., Mendis, CL., Muddle, BC. and Nie, HF. (2001) 'Characterisation of primary intermetallic phases in a Mg-Zn-Al casting alloy'.4th Pacific Rim International Conference on Advanced Materials and Processing (PRICM4). HONOLULU, HI. 1 - 15 December. JAPAN INST METALS. pp. 1203 - 1206.
Mendis, CL., Muddle, BC. and Nie, JF. (2001) 'Enhanced precipitation hardening in Mg-Zn-Al casting alloys'.4th Pacific Rim International Conference on Advanced Materials and Processing (PRICM4). HONOLULU, HI. 1 - 15 December. JAPAN INST METALS. pp. 1207 - 1210.
Djoudi, MS. and Bahai, H. (2001) 'Relocation of natural frequencies using physical parameter modifications', inComputational Fluid and Solid Mechanics. Elsevier. pp. 146 - 149. ISBN 13: 9780080439440.
Fang, CM., Metselaar, R., Hintzen, HT. and De With, G. (2001) 'Structure Models for γ-Aluminum Oxynitride from Ab Initio Calculations'. Journal of the American Ceramic Society, 84 (11). pp. 2633 - 2637. ISSN: 0002-7820
Mottershead, JE., Mares, C. and Friswell, MI. (2001) 'Inverse method for the assignment of vibration nodes'. Mechanical Systems and Signal Processing, 15 (1). pp. 87 - 100. ISSN: 0888-3270
Kambara, M., HariBabu, N., Shi, Y. and Cardwell, DA. (2001) 'Crystal growth of melt-textured Nd-123 under 1% oxygen partial pressure atmosphere'.2000 Applied Superconductivity Conference. VIRGINIA BEACH, VIRGINIA. 1 - 22 September. Institute of Electrical and Electronics Engineers (IEEE). pp. 3442 - 3445. ISSN: 1051-8223
She, FH., Chow, S., Wang, B. and Kong, LX. (2001) 'Identification and Classification of Animal Fibres Using Artificial Neural Networks'. Journal of Textile Engineering, 47 (2). pp. 35 - 38. ISSN: 1346-8235
Vignjevic, R. and Meo, M. (2001) 'Simulation of helicopter under-floor structure impact on water'. International Journal of Crashworthiness, 6 (3). pp. 425 - 443. ISSN: 1358-8265
Fang, CM., Metselaar, R., Hintzen, HT. and De With, G. (2001) 'Application of first-principles methods for the calculation of the crystal and electronic structure of oxynitrides'. Key Engineering Materials, 206-213 (II). pp. 1149 - 1152. ISSN: 1013-9826
Alfano, G. and Crisfield, MA. (2000) 'Numerical simulation of delamination in composites via interface elements'. European Congress on Computational Methods in Applied Sciences and Engineering, ECCOMAS 2000.
McKay, BJ., Cizek, P., Schumacher, P. and O'Reilly, KAQ. (2000) 'Heterogeneous nucleation of α-Al in Al-Ni-Si alloys'. Light Metals: Proceedings of Sessions, TMS Annual Meeting (Warrendale, Pennsylvania). pp. 833 - 839. ISSN: 1096-9586
Natal Jorge, RM., Cardoso, RP. and Cesar de Sa, JMA. (2000) 'A quadrilateral mesh generator for adaptive procedures in bulk forming processes'. Engineering Computations, 17 (8). pp. 950 - 969. ISSN: 0264-4401
Mares, C., Mottershead, JE. and Friswell, MI. (2000) 'Selection and updating of parameters for the GARTEUR SM-AG19 testbed'. Proceedings of the 25th International Conference on Noise and Vibration Engineering, ISMA. pp. 657 - 662.
Gilbert, JM., Elliner, GR., Key, PH., Harrey, P., Ramsey, B. and Harrison, D. (2000) 'Via and embedded resistor formation by matrix-assisted pulsed laser deposition'. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 214 (9). pp. 837 - 839. ISSN: 0954-4054
Gao, CH., Cheng, K. and Kirkwood, D. (2000) 'Investigation on the machining process of BTA deep hole drilling'. Journal of Materials Processing Technology, 107 (1-3). pp. 222 - 227. ISSN: 0924-0136
Jiang, Z., Cheng, K. and Harrison, DK. (2000) 'Concurrent engineering approach to the development of a scroll compressor'. Journal of Materials Processing Technology, 107 (1-3). pp. 194 - 200. ISSN: 0924-0136
Qiu, H., Cheng, K., Li, Y., Li, Y. and Wang, J. (2000) 'Approach to form deviation evaluation for CMM measurement of 2D curve contours'. Journal of Materials Processing Technology, 107 (1-3). pp. 119 - 126. ISSN: 0924-0136
Fern, GR., Silver, J., Withnall, R., Snowden, MJ. and Woodward, N. (2000) 'Oxygen activating biological sites modelled using novel colloidal co-polymer microgels'.SET for Britain. [unpublished]
Katgerman, L. and Eskin, DG. (2000) 'Experimental study of linear shrinkage during solidification of binary and commercial aluminium alloys'.Continuous Casting. Frankfurt/Main. 13 - 15 November. Wiley-VCH. pp. 276 - 281.
Li, GQ., Ding, X. and Zhou, XM. (2000) 'Shaking Table Test Study on a Model of Steel-Concrete Hybrid Structure for Tall Buildings'.China-US Millennium Symposium on Earthquake Engineering. Beijing, China. 8 - 11 November. A A BALKEMA PUBLISHERS. pp. 377 - 381.
Smith, PJ., Cardwell, DA., Hari Babu, N., Zhou, W. and Shi, YH. (2000) 'Properties of Y-Ba-Cu-O powder prepared by evaporative decomposition of solution for melt-processed bulk ceramics'. Superconductor Science and Technology, 13 (11). pp. 1526 - 1532. ISSN: 0953-2048
Harrison, D., Chalkey, A. and Billet, E. (2000) 'The rebound effect', in Birkland, J. (ed.) Designing eco solutions. Earthscan.
Li, G., Zhou, X. and Ding, X. (2000) 'Shaking Table Model Tests of a Steel-Concrete Hybrid High-rise Building'.16th National Symposium on High-rise Building Structures. Shanghai, China. 1 Proceedings of the 16th National Symposium on High-rise Building Structures. pp. 362 - 370.
Huang, Y., Humphreys, FJ. and Ferry, M. (2000) 'Hot deformation and annealing of cube-oriented aluminium single crystals'. Materials Science and Technology, 16 (11-12). pp. 1367 - 1371. ISSN: 1316-2012
Fang, CM., de Wijs, GA., de Groot, RA., Hintzen, HT. and de With, G. (2000) 'ChemInform Abstract: Bulk and Surface Electronic Structure of the Layered Sub‐Nitrides Ca2N and Sr2N.'. ChemInform, 31 (44). ISSN: 0931-7597
Dawson, A., Hinsley, SA., Ferns, PN., Bonser, RHC. and Eccleston, L. (2000) 'Rate of moult affects feather quality: a mechanism linking current reproductive effort to future survival'. Proceedings of the Royal Society of London. Series B: Biological Sciences, 267 (1457). pp. 2093 - 2098. ISSN: 0962-8452
Fang, CM., De Wijs, GA., De Groot, RA., Metselaar, R., Hintzen, HT. and De With, G. (2000)
'O/N ordering in Y
Zhang, J., Fan, Z., Wang, YQ. and Zhou, BL. (2000) 'Effect of cooling rate on the microstructure of hypereutectic Al-Mg2Si alloys'. Journal of Materials Science Letters, 19 (20). pp. 1825 - 1828. ISSN: 0261-8028
Atherton, M., Doorly, DJ. and Collins, MW. (2000) 'A new approach to planning in vitro and in vivo experiments for cardiovascular stents – I. Fundamentals of design procedures (abstract)'. Biomedicine & Pharmacotherapy, 54 (8-9). pp. 437 - 470. ISSN: 0753-3322
Atherton, M., Doorly, DJ. and Collins, MW. (2000) 'A new approach to planning in vitro and in vivo experiments for cardiovascular stents – II. Planning of experiment (abstract)'. Biomedicine & Pharmacotherapy, 54 (8-9). pp. 437 - 470. ISSN: 0753-3322 Open Access Link
Ji, S. and Fan, Z. (2000) 'Microstructural evolution of semisolid Sn-15wt%Pb alloy under high shear rate and high intensity of turbulence'.the 6th Intl Conf. on Semi-Solid Processing of Alloys and Composites. Turin, Italy. 20 - 29 September. Edimet. pp. 723 - 729.
Frey, SD., Harrison, DJ. and Billett, EH. (2000) 'Environmental assessment of electronic products using LCA and ecological footprint'.International Congress and Exhibition on Electronics Goes Green 2000+: A Challenge for the Millenium. Berlin, GERMANY. 11 - 13 September. V D E - VERLAG GMBH. pp. 253 - 258.
Wang, B. and Yang, M. (2000) 'Damping of honeycomb sandwich beams'. Journal of Materials Processing Technology, 105 (1). pp. 67 - 72. ISSN: 0924-0136
Djoudi, MS. and Bahai, H. (2000) 'Physical parameter modifications for specified frequencies'.5th International Conference on Computational Structures Technology/2nd International Conference on Engineering Computational Technology. Leuven, Belgium. 6 - 8 September. Civil-Comp Press. pp. 135 - 140. ISSN: 1759-3433
Djoudi, MS. and Bahai, H. (2000) 'A shell finite element for the general analysis of circular cylindrical shells'.5th International Conference on Computational Structures Technology/2nd International Conference on Engineering Computational Technology. Leuven, Belgium. 6 - 8 September. Civil-Comp Press. pp. 191 - 197. ISSN: 1759-3433
Humphreys, FJ. and Huang, Y. (2000) 'Grain boundary migration during recovery and the early stages of recrystallization'.21th Inter Symp on Materials Science: Recrystalliozation-Fundamental Aspects and Relations to Deformation Microstructure. Roskilde, Denmark. 5 - 5 September.
Fern, G., Silver, J., Withnall, R., Snowden, MJ. and Woodward, N. (2000) 'Modelling biologically active iron sites using colloidal copolymer microgels'.44th Meeting, Mossbauer Spectroscopy Discussion. The Royal Society of Chemistry, Greenwich. 4 - 5 September. [unpublished]
Martinez-Rubio, MI., Ireland, TG., Silver, J., Fern, G., Gibbons, C. and Vecht, A. (2000) 'Effect of EDTA on controlling nucleation and morphology in the synthesis of ultrafine Y2O3 : Eu phosphors'. Electrochem Solid St, 3 (9). pp. 446 - 449. ISSN: 1099-0062
Wang, B. and Yang, M. (2000) 'Damping of honeycomb sandwich beams'. Journal of Materials Processing Technology, 105 (1-2). pp. 67 - 72. ISSN: 0924-0136
Xie, T., Yang, Q., Jones, BE. and Butler, C. (2000) 'Optimization of air cone-jet sensor using 2-D finite element analysis'. Sensors and Actuators, A: Physical, 85 (1). pp. 18 - 22. ISSN: 0924-4247
Cheng, K., Pan, PY. and Harrison, DK. (2000) 'The Internet as a tool with application to agile manufacturing: A web-based engineering approach and its implementation issues'. International Journal of Production Research, 38 (12). pp. 2743 - 2759. ISSN: 0020-7543
Huang, Y. and Humphreys, FJ. (2000) 'High resolution EBSD and its application to the study of heavily deformed microstructures'.IUMRS - 6th Inter. Conf. in Asia, Section E: Scanning Probe Microscopy for Materials Characterization. Hong Kong. 23 - 26 July.
Lawrie, JB. and Abrahams, ID. (2000) 'On the propagation and scattering of fluid-structural waves in a three-dimensional duct bounded by thin elastic walls'.IUTAM Symposium on Diffraction and Scattering in Fluid Mechanics and Elasticity. Manchester, UK. 16 - 20 July. SPRINGER. pp. 279 - 288.
Atherton, MA. and Bates, RA. (2000) 'Bond graph analysis in robust engineering design'. Quality and Reliability Engineering International, 16 (4). pp. 325 - 335. ISSN: 0748-8017 Open Access Link
Atherton, MA., Collins, MW., Piva, S. and Barozzi, GS. (2000) 'Enhanced visualisation of complex thermofluid data: Vertical and horizontal combined convection and microscale heat transfer cases'.18th National Conference on Heat Transfer. Italy. 28 - 30 June. UIT. pp. 243 - 257.Open Access Link
Silver, J., Marsh, PJ., Symons, MC., Svistunenko, DA., Frampton, CS. and Fern, GR. (2000) 'Crystal structure of bis(4-methylimidazole)tetraphenylporphyrinatoiron(III) chloride and related compounds. Correlation of ground state with Fe-N bond lengths'. Inorganic Chemistry, 39 (13). pp. 2874 - 2881. ISSN: 0020-1669 Open Access Link