IMM
Veluscek, M., Kalganova, T. and Broomhead, P. (2015) 'Improving Ant Colony Optimization Performance through Prediction of Best Termination Condition'.2015 IEEE International Conference on Industrial Technology (ICIT 2015). Seville, Spain. 17 - 19 March. IEEE. pp. 2394 - 2402.Open Access Link
Montalba, C., Ramam, K., Eskin, DG., Ruiz-Navas, EM. and Prat, O. (2015) 'Fabrication of a novel hybrid AlMg5/SiC/PLZT metal matrix composite produced by hot extrusion'. Materials and Design, 69. pp. 213 - 218. ISSN: 0261-3069 Open Access Link
Vorozhtsov, SA., Khrustalyov, P., Eskin, DG., Кulkov, SN. and Alba-Baena, N. (2015) 'The Physical-Mechanical and Electrical Properties of Cast Aluminum-Based Alloys Reinforced with Diamond Nanoparticles'. Russian Physics Journal, 57 (11). pp. 1485 - 1490. ISSN: 1064-8887 Open Access Link
Brewin, MP., Birch, MJ., Mehta, DJ., Reeves, JW., Shaw, S., Kruse, C., et al. (2015) 'Characterisation of Elastic and Acoustic Properties of an Agar-Based Tissue Mimicking Material'. Annals of Biomedical Engineering, 23 (4). pp. 865 - 890. ISSN: 0090-6964 Open Access Link
Musto, M. and Alfano, G. (2015) 'A fractional rate-dependent cohesive-zone model'. INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING, 105 (5). pp. 313 - 341. ISSN: 0029-5981 Open Access Link
Yang, W., Yang, X. and Ji, S. (2015) 'Melt superheating on the microstructure and mechanical properties of diecast Al-Mg-Si-Mn alloy'. Metals and Materials International, 21 (2). pp. 382 - 390. ISSN: 1598-9623 Open Access Link
Koster, RS., Fang, CM., Dijkstra, M., Van Blaaderen, A. and Van Huis, MA. (2015) 'Stabilization of rock salt ZnO nanocrystals by low-energy surfaces and Mg additions: A first-principles study'. Journal of Physical Chemistry C, 119 (10). pp. 5648 - 5656. ISSN: 1932-7447
Nowak, M., Yeoh, WK., Bolzoni, L. and Nadendla, HB. (2015) 'Development of Al–Nb–B master alloys using Nb and KBF4 Powders'. Materials and Design, 75. pp. 40 - 46. ISSN: 1873-4197 Open Access Link
Gracio, JJ., Vincze, G., Yoon, JW., Cardoso, RP., Rauch, E. and Barlat, F. (2015) 'Modelling the Effect of Asymmetric Rolling on Mechanical Properties of Al-Mg Alloys'. Steel Research International, 86 (8). pp. 922 - 931. ISSN: 1611-3683
Yang, W., Ji, S., Li, Z. and Wang, M. (2015) 'Grain boundary precipitation induced by grain crystallographic misorientations in an extruded Al-Mg-Si-Cu alloy'. Journal of Alloys and Compounds, 624. pp. 27 - 30. ISSN: 0925-8388 Open Access Link
Bolzoni, L., Nowak, M. and Hari Babu, N. (2015) 'Assessment of the influence of Al-2Nb-2B master alloy on the grain refinement and properties of LM6 (A413) alloy'. Materials Science and Engineering A, 628 (25 March 2015). pp. 230 - 237. ISSN: 0921-5093 Open Access Link
Cui, Q., Ding, H. and Cheng, K. (2015) 'An analytical investigation on the workpiece roundness generation and its perfection strategies in centreless grinding'. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 229 (3). pp. 409 - 420. ISSN: 0954-4054
Bai, Q., Li, K., Liang, Y. and Cheng, K. (2015) 'Wear and breakage behaviors of PCD small-diameter end-mill: a case study on machining 2A12 aluminum alloy'. International Journal of Advanced Manufacturing Technology, 77 (5-8). pp. 839 - 846. ISSN: 0268-3768
Whiteman, J. (2015) 'Third special issue on the mathematics of finite elements and applications'. Numerical Methods for Partial Differential Equations, 31 (2). pp. 365 - 366. ISSN: 0749-159X
Lam, B. and Dearden, A. (2015) 'Enhancing service development and service delivery through co-design'. Voluntary Sector Review, 6 (1). pp. 61 - 80. ISSN: 2040-8056
Xiao, C., Ding, H., Cheng, K. and Chen, S. (2015) 'Design of an innovative smart turning tool with application to real-time cutting force measurement'. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 229 (3). pp. 563 - 568. ISSN: 0954-4054
Winter, M. and Wei, J. (2015) 'Existence and stability of a spike in the central component for a consumer chain model'. Journal of Dynamics and Differential Equations, 27 (3-4). pp. 1141 - 1171. ISSN: 1572-9222 Open Access Link
Bolzoni, L., Nowak, M. and nadendla. (2015) 'Grain refining potency of Nb-B inoculation on Al-12Si-0.6Fe-0.5Mn alloy'. Journal of Alloys and Compounds, 623. pp. 79 - 82. ISSN: 0925-8388 Open Access Link
Koulouri, T., Lauria, S. and Macredie, RD. (2015) 'Teaching introductory programming: a quantitative evaluation of different approaches'. ACM Transactions on Computing Education, 14 (4). pp. 1 - 28. ISSN: 1531-4278 Open Access Link
Lebon, GSB., Pericleous, K., Tzanakis, I. and Eskin, D. (2015) 'A Model of Cavitation for the Treatment of a Moving Liquid Metal Volume', in Wiley. pp. 23 - 30. ISBN 13: 9781119082385.
Eskin, DG., Vadakke Madam, SK., Tamayo, J., Vorozhtsov, SA., Hari Babu, N. and Vorozhtsov, AB. (2015) 'Application of external fields to the development of aluminum-based nanocomposite and master alloys'. TMS Annual Meeting. pp. 19 - 24.Open Access Link
Anguilano, L. and Casalegno, E. (2015) 'MOVImenti: Interaction between Man and Landscape'. Create Space. ISSN 10: 1508432120 ISSN 13: 9781508432128
Zhang, R-R., Xu, Y-M., Harrison, D., Fyson, J., Qiu, F-L. and Southee, D. (2015) 'Flexible strip supercapacitors for future energy storage'. International Journal of Automation and Computing, 12 (1). pp. 43 - 49. ISSN: 1476-8186 Open Access Link
Ivanov, A., MacAulay., Senin, N., Giusca, C. and Leach, R. (2015) 'Review of feature boundary identification techniques for the characterization of tessellated surfaces'. Surface Topography: Metrology and Properties, Surf. Topogr.: Metrol. Prop. 3 (2015) 013002 (1). pp. 013002 - 013002.Open Access Link
Mousavi, A., Komashie, A., Clarkson, J. and Young, T. (2015) 'An integrated model of patient and staff satisfaction using queuing theory'. IEEE Journal of Translational Engineering in Health and Medicine, 3 (2015). pp. 1 - 10. ISSN: 2168-2372 Open Access Link
Ji, S., Yan, F. and Fan, Z. (2015) 'Development of a high strength Al-Mg2Si-Mg-Zn based alloy for high pressure die casting'. Materials Science and Engineering A, 626. pp. 165 - 174. ISSN: 0921-5093 Open Access Link
Fern, G., Silver, J. and Coe-Sullivan, S. (2015) 'Cathodoluminescence and electron microscopy of red quantum dots used for display applications'. Journal of the Society for Information Display, 23 (2). pp. 50 - 55. ISSN: 1071-0922 Open Access Link
Butt, HSU., Xue, P., Jiang, TZ. and Wang, B. (2015) 'Parametric identification for material of viscoelastic SHPB from wave propagation data incorporating geometrical effects'. International Journal of Mechanical Sciences, 91. pp. 46 - 54. ISSN: 0020-7403
Chang, I., Tucker, D., Su, S. and Brown, PB. (2015) 'Low Temperature Synthesis of Boron Carbide Powders'.39th International Conference & Exposition on Advanced Ceramics and Composites. Florida. 25 - 30 January. Conference Proceedings - 39th ICACC.
Dowson, M., Harrison, D. and Dehouche, Z. (2015) 'Trombe walls with nanoporous aerogel insulation applied to UK housing refurbishments'. International Journal of Smart and Nano Materials, 5 (4). pp. 283 - 303. ISSN: 1947-5411 Open Access Link
Sreekumar, VM., Nadendla, HB., Eskin, D. and Fan, Z. (2015) 'Structure-property analysis of in-situ Al-MgAl2O4 metal matrix composites synthesized using ultrasonic cavitation'. Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing, 628. pp. 30 - 40. ISSN: 0921-5093 Open Access Link
Fang, CM., Van Huis, MA., Xu, Q., Cava, RJ. and Zandbergen, HW. (2015)
'Unexpected origin of magnetism in monoclinic Nb
Yang, L., Zhou, X., Liang, SM., Schmid-Fetzer, R., Fan, Z., Scamans, G., et al. (2015) 'Effect of traces of silicon on the formation of Fe-rich particles in pure magnesium and the corrosion susceptibility of magnesium'. Journal of Alloys and Compounds, 619. pp. 396 - 400. ISSN: 0925-8388
Simm, W., Ferrario, M-A., Whittle, J., Davenport, R., Binner, J., Frankova, K., et al. (2015) 'On the Role of Digital Consultation Tools in Public Space Design: A Case Study'. Interacting with Computers, 28 (3). pp. 273 - 292. ISSN: 0953-5438
Das, S., Barekar, N., El Fakir, O., Yang, X., Dear, JP. and Fan, Z. (2015) 'Influence of intensive melt shearing on subsequent hot rolling and the mechanical properties of twin roll cast AZ31 strips'. Materials Letters, 144. pp. 54 - 57. ISSN: 0167-577X Open Access Link
Yu, Z., Huang, Y., Mendis, CL., Hort, N. and Meng, J. (2015) 'Microstructural evolution and mechanical properties of Mg-11Gd-4.5Y-1Nd-1.5Zn-0.5Zr alloy prepared via pre-ageing and hot extrusion'. Materials Science and Engineering: A, 624. pp. 23 - 31. ISSN: 0921-5093
Fang, C., Lu, X., Buijs, W., Fan, Z., Genceli Güner, FE., van Huis, MA., et al. (2015)
'Crystal structure, stability, and electronic properties of hydrated metal sulfates MSO
Vorozhtsov, S., Zhukov, I., Vorozhtsov, A., Zhukov, A., Eskin, D. and Kvetinskaya, A. (2015) 'Synthesis of Micro- and Nanoparticles of Metal Oxides and Their Application for Reinforcement of Al-Based Alloys'. Advances in Materials Science and Engineering, 2015. pp. 1 - 6. ISSN: 1687-8434 Open Access Link
Huang, Y., Liu, D. and Chen, M. (2015) 'A Biomedical Corrosion Resistant Mg-2Zn-0.5Ca-1β-TCP Composite Fabricated By High Shear Solidification and ECAE'.Royal Society of Chemistry-Biomaterials Annual Meeting. London, UK. 5 - 6 January.
Cardoso, RP., Yoon, JW. and Kim, JB. (2015) 'Constitutive Modelling with Strain Rate Sensitivity and Fracture Criteria for SPH Ballistic Simulations'.International Symposium on Plasticity 2015.
Adetoro, M. and Cardoso, RP. (2015) 'The Modelling of Temperature Dependent Flow Softening in the Manufacturing of Titanium Alloys'.International Symposium on Plasticity 2015.
Eskin, D., Alba-Baena, N., Pabel, T. and da Silva, M. (2015) 'Ultrasonic degassing of aluminium alloys: basic studies and practical implementation'. Materials Science and Technology, 31 (1). pp. 79 - 84. ISSN: 1316-2012 Open Access Link
Evans, MA., Campbell, MA. and Pei, E. (2015) 'Developing tools to support collaboration and understanding during industrial design practice', inDesign Pedagogy - Developments in Artand Design Education. Farnham : Gower.
McMillan, A., Archer, E., Bhaskar, A., Blackledge, J., Czigány, T., Day, R., et al. (2015) 'Proceedings'. IOP Conference Series: Materials Science and Engineering. ISSN: 1757-8981
Lebon, GSB., Pericleous, K., Tzanakis, I. and Eskin, D. (2015) 'Application of the “Full Cavitation Model” to the fundamental study of cavitation in liquid metal processing'. IOP Conference Series: Materials Science and Engineering, 72 (Forum 5). pp. 052050 - 052050. ISSN: 1757-899X Open Access Link
Wang, B. and Wiercigroch, M. (2015) 'Forward: Special issue in honour of professor Steve R. Reid FREng FRSE'. International Journal of Mechanical Sciences, 91. pp. 1 - 2. ISSN: 0020-7403
Hetey, L., Campbell, J. and Vignjevic, R. (2015) 'Advisory system development for reliable FEM modelling in aerospace'. Aircraft Engineering and Aerospace Technology, 87 (1). pp. 11 - 18. ISSN: 0002-2667
Haghayeghi, R., Ezzatneshan, E. and Bahai, H. (2015) 'Grain refinement of AA5754 aluminium alloy by ultrasonic cavitation: Experimental study and numerical simulation'. Metals and Materials International, 21 (1). pp. 109 - 117. ISSN: 1598-9623
Ferrando Chacon, JL., Kappatos, V., Balachandran, W. and Gan, TH. (2015) 'A novel approach for incipient defect detection in rolling bearings using acoustic emission technique'. Applied Acoustics, 89. pp. 88 - 100. ISSN: 0003-682X
Yang, L., Xia, M., Babu, NH. and Li, J. (2015)
'Formation of MgAl