IMM
Fern, G., Silver, J., Coe-Sullivan, S. and Steckel, JS. (2014) 'Red Quantum Dots under the Electron Microscope'.Display Week 2014. San Diego. 3 - 6 June. ISSN: 2154-6746
Gibbs, J., Sutcliffe, L., Sadig, T., Sonnenberg, P., Ashcroft, R., Gkaczidou, V., et al. (2014) 'DEVELOPMENT OF AN AUTOMATED ONLINE CLINICAL CONSULTATION WITH ELECTRONIC ANTIBIOTIC PRESCRIBING FOR THE REMOTE MANAGEMENT OF GENITAL CHLAMYDIA TRACHOMATIS INFECTION WITHIN THE ESTI2 CONSORTIUM'.STD Prevention Conference. Atlanta, GA. 1 - 12 June. LIPPINCOTT WILLIAMS & WILKINS. pp. S69 - S69. ISSN: 0148-5717 Open Access Link
Men, H. and Fan, Z. (2014) 'Molecular dynamic simulation of the atomic structure of aluminum solid-liquid interfaces'. Materials Research Express, 1 (2). pp. 025705 - 025705. ISSN: 2053-1591
Wang, S., Fan, Z., Koster, RS., Fang, C., Van Huis, MA., Yalcin, AO., et al. (2014) 'New ab initio based pair potential for accurate simulation of phase transitions in ZnO'. Journal of Physical Chemistry C, 118 (20). pp. 11050 - 11061. ISSN: 1932-7447
Yang, W., Ji, S., Stone, I., Scamans, G., Fan, Z., Zhou, X. and et al. (2014) 'Heterogeneous Nucleation of α-Al Grain on Primary α-AlFeMnSi Intermetallic Investigated Using 3D SEM Ultramicrotomy and HRTEM'. Metallurgical and Materials Transactions A, 45A (9). pp. 3971 - 3980. ISSN: 1073-5623 Open Access Link
Wu, T. and Cheng, K. (2014) 'An investigation on the micro cutting performance of diamond-like carbon coatings using finite element method'. The International Journal of Advanced Manufacturing Technology, 73 (9). pp. 1321 - 1340. ISSN: 0268-3768
Yalcin, AO., Fan, Z., Goris, B., Li, W-F., Koster, RS., Fang, C-M., et al. (2014) 'Atomic Resolution Monitoring of Cation Exchange in CdSe-PbSe Heteronanocrystals during Epitaxial Solid–Solid–Vapor Growth'. Nano Letters, 14 (6). pp. 3661 - 3667. ISSN: 1530-6984 Open Access Link
Bell, D., Koulouri, T., Lauria, S., Macredie, RD. and Sutton, J. (2014) 'Microblogging as a mechanism for human–robot interaction'. Knowledge-Based Systems, 69 (1). pp. 64 - 77. ISSN: 0950-7051 Open Access Link
Tarhini, A., Hone, KS. and Liu, X. (2014) 'A cross-cultural examination of the impact of social, organisational and individual factors on educational technology acceptance between British and Lebanese university students'. British Journal of Educational Technology, 46 (4). pp. 739 - 755. ISSN: 1467-8535 Open Access Link
Vignjevic, R., Djordjevic, N., Gemkow, S., De Vuyst, T. and Campbell, J. (2014) 'SPH as a nonlocal regularisation method: Solution for instabilities due to strain-softening'. Computer Methods in Applied Mechanics and Engineering, 277. pp. 281 - 304. ISSN: 0045-7825 Open Access Link
Li, JH., Zarif, MZ., Albu, M., McKay, BJ., Hofer, F., Schumacher, P. and et al. (2014) 'Nucleation kinetics of entrained eutectic Si in Al-5Si alloys'. Acta Materialia, 72. pp. 80 - 98. ISSN: 1359-6454
Saafi, M., Tang, L., Fung, J., Rahman, M., Sillars, F., Liggat, J. and et al. (2014) 'Graphene/Fly Ash Geopolymeric Composites as Self-sensing Structural Materials'. Smart Materials and Structures, 23 (6). pp. 1 - 10. ISSN: 0964-1726
Noh, Y. (Accepted) 'MODEL FOR INTUBATION TRAINING'.
Adey, D., Agarwalla, SK., Ankenbrandt, CM., Asfandiyarov, R., Back, JJ., Barker, G., et al. (2014) 'Light sterile neutrino sensitivity at the nuSTORM facility'. Physical Review D - Particles, Fields, Gravitation, and Cosmology, 89 (7). ISSN: 2470-0029 Open Access Link
Chang, I. and Brown, P. (2014) 'Synthesis and characterisation of Si doped boron carbide'.MACH Conference. Annapolis. 9 - 11 April. Conference Proceedings.
Chang, I., Peng, T. and Uzunsoy, D. (2014) 'Investigation of Wear Behaviour of Aluminium Alloy Reinforced with Carbon Nanotubes'.SAE 2014 World Congress and Exhibition. Michigan. 8 - 10 April. SAE International. pp. 596 - 601. ISSN: 1946-3979
Wang, C., Cheng, K., Minton, T. and Rakowski, R. (2014) 'Development of a novel surface acoustic wave (SAW) based smart cutting tool in machining hybrid dissimilar material'. Manufacturing Letters, 2 (2). pp. 21 - 25. ISSN: 2213-8463
Pei, E. (2014) '4D printing - Revolution or fad?'. Assembly Automation, 34 (2). pp. 123 - 127. ISSN: 0144-5154 Open Access Link
Rustell, M. (2014) 'Breakwater Layout Optimisation Using A Root-Finding Algorithm'.Proceedings of Ports '13: 13th Triennial International Conference. Seattle, Washington. 24 - 28 August. American Society of Civil Engineers. pp. 1929 - 1938.Open Access Link
Iqbal, N., Xue, P., Wang, B. and Li, Y. (2014) 'On the high strain rate behavior of 63-37 Sn-Pb eutectic solders with temperature effects'. International Journal of Impact Engineering, 74. pp. 126 - 131. ISSN: 0734-743X Open Access Link
Ceschin, F. (Accepted) 'The societal embedding of sustainable Product-Service Systems: looking for synergies between strategic design and transition studies', inProduct-Service System Design for Sustainability. Greenleaf Publishing Limited. pp. 250 - 276. ISBN 13: 9781909493698.
Ceschin, F., Vezzoli, C. and Zingale, S. (Accepted) 'An aesthetic for sustainable interactions in Product-Service Systems?', inProduct-Service System Design for Sustainability. Greenleaf Publishing Limited. pp. 197 - 217. ISBN 13: 9781909493698.
Djambazov, G., Bojarevics, V., Lebon, B. and Pericleous, K. (2014) 'Contactless Acoustic Wave Generation in a Melt by Electromagnetic Induction', inLight Metals 2014. Wiley. , 9781118889084. pp. 1379 - 1382. ISBN 13: 9781118889084.
Eskin, DG. (2014) 'Mechanisms and Control of Macrosegregation in DC Casting'. Wiley. pp. 851 - 860.
Park, W. and Choi, Y. (2014) 'ENHANCEMENT OF STRATEGIC THINKING IN DESIGN EDUCATION'.8th International Technology, Education and Development Conference (INTED). Valencia, Spain. 10 - 12 March. IATED-INT ASSOC TECHNOLOGY EDUCATION A& DEVELOPMENT. pp. 6807 - 6815. ISSN: 2340-1079
Vorozhtsov, S., Eskin, D., Vorozhtsov, A. and Kulkov, S. (2014) 'Physico-Mechanical and Electrical Properties of Aluminum-Based Composite Materials with Carbon Nanoparticles'. Wiley. pp. 1373 - 1377.
Alfano, G. (2014) 'Multi-timescale analysis of fatigue crack growth on interfaces via cohesive-zone models'. European Journal of Computational Mechanics, 23 (1-2). pp. 38 - 60. ISSN: 1779-7179 Open Access Link
Klösch, G., McKay, BJ. and Schumacher, P. (2014)
'Preliminary Investigation on the Grain Refinement Behavior of ZrB
Kumar, S., Hari Babu, N., Scamans, GM., Fan, Z. and O'Reilly, KAQ. (2014) 'Twin roll casting of Al-Mg alloy with high added impurity content'. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 45 (6). pp. 2842 - 2854. ISSN: 1073-5623 Open Access Link
Lau, ET., Yang, Q., Forbes, AB., Wright, P. and Livina, VN. (2014) 'Modelling carbon emissions in electric systems'. Energy Conversion and Management, 80. pp. 573 - 581. ISSN: 0196-8904
Maischak, M., Krebs, A. and Stephan, EP. (2014) 'Quasi-optimal degree distribution for a quadratic programming problem arising from the p-version finite element method for a one-dimensional obstacle problem'. Discrete Applied Mathematics, 164 (PART 1). pp. 200 - 209. ISSN: 0166-218X Open Access Link
Subroto, T., Miroux, A., Katgerman, L., Bouffier, L., Josserond, C., Salvo, L., et al. (2014) 'Formation of Hot Tear Under Controlled Solidification Conditions'. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 45A (June). pp. 2855 - 2862. ISSN: 1073-5623 Open Access Link
Wang, C., Cheng, K., Chen, X., Minton, T. and Rakowski, R. (2014) 'Design of an instrumented smart cutting tool and its implementation and application perspectives'. Smart Materials and Structures, 23 (3). pp. 035019 - 035019. ISSN: 0964-1726 Open Access Link
Srinivasan, A., Huang, Y., Mendis, CL., Blawert, C., Kainer, KU. and Hort, N. (2014) 'Investigations on microstructures, mechanical and corrosion properties of Mg-Gd-Zn alloys'. Materials Science and Engineering: A, 595. pp. 224 - 234. ISSN: 0921-5093
Shaw, S., Banks, HT., Birch, MJ., Brewin, MP., Greenwald, SE., Hu, S., et al. (2014) 'High-order space-time finite element schemes for acoustic and viscodynamic wave equations with temporal decoupling'. International Journal for Numerical Methods in Engineering, 98 (2). pp. 131 - 156. ISSN: 1097-0207 Open Access Link
Berestycki, H., Wei, J. and Winter, M. (2014) 'Existence of symmetric and asymmetric spikes for a crime hotspot model'. SIAM Journal on Mathematical Analysis, 46 (1). pp. 691 - 719. ISSN: 0036-1410 Open Access Link
Joshi, U. and Babu, NH. (2014) 'Effect of Al addition on microstructure of AZ91D', in Minerals, Metals and Materials Society. pp. 209 - 212. ISBN 13: 9781118888162. Open Access Link
Fang, CM., Koster, RS., Li, WF. and Van Huis, MA. (2014)
'Predicted stability, structures, and magnetism of 3d transition metal nitrides: The M
Djordjevic, N., Vignjevic, R., Gemkow, S., De Vuyst, T., Campbell, J. and Case, S. (2014) 'Strain Softening Instabilities Resolved with Nonlocal Regularisation Method SPH'.11th World Congress on Computational Mechanics (WCCM XI ECCOMAS V). Barcelona, Spain.
Kalganova, T., Ogunbanwo, A., Williamson, A., Veluscek, M., Izsak, R. and Broomhead, P. (2014) 'Transportation network optimization'. Encyclopaedia of Business Analytics and Optimization. pp. 2570 - 2583.Open Access Link
del Pozo, S., Ribton, CN. and Smith, DR. (2014) 'A Novel RF Excited Plasma Cathode Electron Beam Gun Design'. IEEE Transactions on Electron Devices, 61 (6). pp. 1890 - 1894. ISSN: 0018-9383 Open Access Link
Armillotta, A., Cavallaro, M. and Minnella, S. (2014) 'A tool for computer-aided orientation selection in additive manufacturing processes'. High Value Manufacturing: Advanced Research in Virtual and Rapid Prototyping - Proceedings of the 6th International Conference on Advanced Research and Rapid Prototyping, VR@P 2013. pp. 469 - 475.
Armillotta, A., Cavallaro, M. and Minnella, S. (2014) 'Evaluation of FDM options for fashion shoe heels manufacturing'. High Value Manufacturing: Advanced Research in Virtual and Rapid Prototyping - Proceedings of the 6th International Conference on Advanced Research and Rapid Prototyping, VR@P 2013. pp. 641 - 648.
Lockton, D., Nicholson, L., Cain, R. and Harrison, D. (2014) 'Persuasive technology for sustainable workplaces'. Interactions, 21 (1). pp. 58 - 61. ISSN: 1072-5520
Men, H. and Fan, Z. (2014) 'Atomic ordering in liquid aluminium induced by substrates with misfits'. Computational Materials Science, 85. pp. 1 - 7. ISSN: 0927-0256
Dick, RE., Cardoso, RP., Paulino, M. and Yoon, JW. (2014) 'Benchmark 4: Wrinkling during cup drawing'.NUMISHEET 2014, The 9th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes.
Cardoso, RP. and Cesar de Sa, JMA. (2014) 'Locking and its treatment for nonlinear isogeometric analysis'.NUMISHEET 2014, The 9th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes.
Anguilano, L., Giannitrapani, E., Ianni, F. and Chilardi, S. (2014) 'Case Bastione: a prehistoric settlement in the Erei uplands (central Sicily)'. Origini, XXXVI. pp. 181 - 211.
Mousavi, A., Cole, J., Kalganova, T., Stone, R., Zhang, J., Petiffer, S., et al. (2014) 'Synopsis of an engineering solution for a painful problem Phantom Limb Pain'.9th International Joint Conference on Computer Vision, Imaging and Computer Graphics Theory and Applications (VISIGRAPP 2014. Lisbon, Portugal. 5 - 8 January. IEEE. pp. 210 - 215.Open Access Link
Ferri, C., Minton, T., Bin Che Ghani, S. and Cheng, K. (2014) 'Efficiency in contamination-free machining using microfluidic structures'. CIRP Journal of Manufacturing Science and Technology, 7 (2). pp. 97 - 105. ISSN: 1755-5817
Atherton, MA., Mares, C. and Stolarski, TA. (2014) 'Some fundamental aspects of self-levitating sliding contact bearings and their practical implementations'. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 228 (9). pp. 916 - 927. ISSN: 1350-6501 Open Access Link