IMM
Bonser, RHC. (2001) 'The elastic properties of wing and contour feather keratin from the Ostrich Struthio camelus'. Ibis, 143 (1). pp. 144 - 145. ISSN: 0019-1019
Turner, RJ., Taylor, EA., Mcdonnell, JAM., Stokes, H., Marriott, P., Wilkinson, J., et al. (2001) 'Cost effective honeycomb and multi-layer insulation debris shields for unmanned spacecraft'. International Journal of Impact Engineering, 26 (1-10). pp. 785 - 796. ISSN: 0734-743X
Jones, E., Mann, D., Harrison, D. and Stanton, N. (2001) 'An eco-innovation case study of domestic dishwashing through the application of TRIZ tools'. Creativity and Innovation Management, 10 (1). pp. 3 - 14. ISSN: 0963-1690
Bourgeois, L., Mendis, CL., Muddle, BC. and Nie, HF. (2001) 'Characterisation of primary intermetallic phases in a Mg-Zn-Al casting alloy'.4th Pacific Rim International Conference on Advanced Materials and Processing (PRICM4). HONOLULU, HI. 1 - 15 December. JAPAN INST METALS. pp. 1203 - 1206.
Mendis, CL., Muddle, BC. and Nie, JF. (2001) 'Enhanced precipitation hardening in Mg-Zn-Al casting alloys'.4th Pacific Rim International Conference on Advanced Materials and Processing (PRICM4). HONOLULU, HI. 1 - 15 December. JAPAN INST METALS. pp. 1207 - 1210.
Fang, CM., De With, G. and Parker, SC. (2001)
'Computer Simulation of Dissociative Adsorption of Water on the Surfaces of Spinel MgAl
Fang, CM., Metselaar, R., Hintzen, HT. and De With, G. (2001) 'Structure Models for γ-Aluminum Oxynitride from Ab Initio Calculations'. Journal of the American Ceramic Society, 84 (11). pp. 2633 - 2637. ISSN: 0002-7820
Fang, CM., Metselaar, R., Hintzen, HT. and De With, G. (2001) 'Application of first-principles methods for the calculation of the crystal and electronic structure of oxynitrides'. Key Engineering Materials, 206-213 (II). pp. 1149 - 1152. ISSN: 1013-9826
Mottershead, JE., Mares, C. and Friswell, MI. (2001) 'Inverse method for the assignment of vibration nodes'. Mechanical Systems and Signal Processing, 15 (1). pp. 87 - 100. ISSN: 0888-3270
Kambara, M., HariBabu, N., Shi, Y. and Cardwell, DA. (2001) 'Crystal growth of melt-textured Nd-123 under 1% oxygen partial pressure atmosphere'.2000 Applied Superconductivity Conference. VIRGINIA BEACH, VIRGINIA. 1 - 22 September. Institute of Electrical and Electronics Engineers (IEEE). pp. 3442 - 3445. ISSN: 1051-8223
She, FH., Chow, S., Wang, B. and Kong, LX. (2001) 'Identification and Classification of Animal Fibres Using Artificial Neural Networks'. Journal of Textile Engineering, 47 (2). pp. 35 - 38. ISSN: 1346-8235
Vignjevic, R. and Meo, M. (2001) 'Simulation of helicopter under-floor structure impact on water'. International Journal of Crashworthiness, 6 (3). pp. 425 - 443. ISSN: 1358-8265
Hunter, J. and Kalganova, T. (2001) 'Soft Computing in Investment Appraisal'. studies, 14. pp. 17 - 17.
Nakayama, K., Qi, K. and Hu, X. (2001) 'Dynamic mechanical properties of rolled polypropylene sheets'. Polymers and Polymer Composites, 9 (3). pp. 151 - 156. ISSN: 0967-3911
Bennett, FH., Brameier, M., Cagnoni, S., Chen, S., Davila, J., Dittrich, P., et al. (2001) 'The following reviewers have helped us to judge papers and reviews submitted for Volume 2 of Genetic Programming and Evolvable Machines'. Genetic Programming and Evolvable Machines, 2. pp. 315 - 315.
Shepherd, PR., Taylor, C., Evans, PSA. and Harrison, DJ. (2001) 'Measurement and modelling of MIC components using conductive lithographic films'.31st European Microwave Conference, 2001. IEEE. pp. 1 - 4.
Ghobadian, A., O'Regan, N., Viney, H. and Gallear, D. (2001) 'Creating value in the new competitive landscape', in Ghobadian, A., O'Regan, N., Gallear, D. and Viney, H. (eds.) Strategy and Performance: Achieving Competitive Advantage in the Global Market Place. Palgrave macmillan. pp. 1 - 10. ISBN 10: 1-4039-1618-7. ISBN 13: 9781349512652.
Ghobadian, A., Woo, HS., Gallear, D., Viney, H. and Liu, J. (2001) 'Benchmarking: Concept and Practice - With Particular Reference to the Finance Function'. CIMA Publishing. ISSN 10: 1-85971 488 9
Gan, TH., Hutchins, DA., Billson, DR. and Wong, FC. (2001) 'Ultrasonic tomographic imaging of an encased, highly attenuating solid medium'. Research in Nondestructive Evaluation, 13 (3). pp. 131 - 152. ISSN: 0934-9847
Wang, Y. and Jones, H. (2001)
'Effect of growth velocity on the growth temperature of the Al-Al
Wang, Y., Rainforth, WM., Jones, H. and Lieblich, M. (2001)
'Dry wear behaviour and its relation to microstructure of novel 6092 aluminium alloy-Ni
Eskin, DG. and Kharakterova, ML. (2001) 'The effect of silicon and copper on the precipitation hardening of sheets of a 6XXX-series alloy'. Materials Technology, 35. pp. 5 - 8.
Ji, S. and Fan, Z. (2001) 'Improving the roundness of foundry sands with artificial processing'. International Journal of Cast Metals Research, 14 (1). pp. 37 - 42. ISSN: 1364-0461
Bonser, RHC. (2001) 'Mites on birds - Comment from Bonser'. Trends in Ecology and Evolution, 16 (1). pp. 18 - 19. ISSN: 0169-5347
Djoudi, MS. and Bahai, H. (2001) 'Relocation of natural frequencies using physical parameter modifications', inComputational Fluid and Solid Mechanics. Elsevier. pp. 146 - 149. ISBN 13: 9780080439440.
Gilbert, JM., Elliner, GR., Key, PH., Harrey, P., Ramsey, B. and Harrison, D. (2000) 'Via and embedded resistor formation by matrix-assisted pulsed laser deposition'. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 214 (9). pp. 837 - 839. ISSN: 0954-4054
Alfano, G. and Crisfield, MA. (2000) 'Numerical simulation of delamination in composites via interface elements'. European Congress on Computational Methods in Applied Sciences and Engineering, ECCOMAS 2000.
Natal Jorge, RM., Cardoso, RP. and Cesar de Sa, JMA. (2000) 'A quadrilateral mesh generator for adaptive procedures in bulk forming processes'. Engineering Computations, 17 (8). pp. 950 - 969. ISSN: 0264-4401
McKay, BJ., Cizek, P., Schumacher, P. and O'Reilly, KAQ. (2000) 'Heterogeneous nucleation of α-Al in Al-Ni-Si alloys'. Light Metals: Proceedings of Sessions, TMS Annual Meeting (Warrendale, Pennsylvania). pp. 833 - 839. ISSN: 1096-9586
Mares, C., Mottershead, JE. and Friswell, MI. (2000) 'Selection and updating of parameters for the GARTEUR SM-AG19 testbed'. Proceedings of the 25th International Conference on Noise and Vibration Engineering, ISMA. pp. 657 - 662.
Gao, CH., Cheng, K. and Kirkwood, D. (2000) 'Investigation on the machining process of BTA deep hole drilling'. Journal of Materials Processing Technology, 107 (1-3). pp. 222 - 227. ISSN: 0924-0136
Jiang, Z., Cheng, K. and Harrison, DK. (2000) 'Concurrent engineering approach to the development of a scroll compressor'. Journal of Materials Processing Technology, 107 (1-3). pp. 194 - 200. ISSN: 0924-0136
Qiu, H., Cheng, K., Li, Y., Li, Y. and Wang, J. (2000) 'Approach to form deviation evaluation for CMM measurement of 2D curve contours'. Journal of Materials Processing Technology, 107 (1-3). pp. 119 - 126. ISSN: 0924-0136
Fern, GR., Silver, J., Withnall, R., Snowden, MJ. and Woodward, N. (2000) 'Oxygen activating biological sites modelled using novel colloidal co-polymer microgels'.SET for Britain. [unpublished]
Katgerman, L. and Eskin, DG. (2000) 'Experimental study of linear shrinkage during solidification of binary and commercial aluminium alloys'.Continuous Casting. Frankfurt/Main. 13 - 15 November. Wiley-VCH. pp. 276 - 281.
Li, GQ., Ding, X. and Zhou, XM. (2000) 'Shaking Table Test Study on a Model of Steel-Concrete Hybrid Structure for Tall Buildings'.China-US Millennium Symposium on Earthquake Engineering. Beijing, China. 8 - 11 November. A A BALKEMA PUBLISHERS. pp. 377 - 381.
Harrison, D., Chalkey, A. and Billet, E. (2000) 'The rebound effect', in Birkland, J. (ed.) Designing eco solutions. Earthscan.
Li, G., Zhou, X. and Ding, X. (2000) 'Shaking Table Model Tests of a Steel-Concrete Hybrid High-rise Building'.16th National Symposium on High-rise Building Structures. Shanghai, China. 1 Proceedings of the 16th National Symposium on High-rise Building Structures. pp. 362 - 370.
Huang, Y., Humphreys, FJ. and Ferry, M. (2000) 'Hot deformation and annealing of cube-oriented aluminium single crystals'. Materials Science and Technology, 16 (11-12). pp. 1367 - 1371. ISSN: 1316-2012
Smith, PJ., Cardwell, DA., Hari Babu, N., Zhou, W. and Shi, YH. (2000) 'Properties of Y-Ba-Cu-O powder prepared by evaporative decomposition of solution for melt-processed bulk ceramics'. Superconductor Science and Technology, 13 (11). pp. 1526 - 1532. ISSN: 0953-2048
Fang, CM., de Wijs, GA., de Groot, RA., Hintzen, HT. and de With, G. (2000) 'ChemInform Abstract: Bulk and Surface Electronic Structure of the Layered Sub‐Nitrides Ca2N and Sr2N.'. ChemInform, 31 (44). ISSN: 0931-7597
Dawson, A., Hinsley, SA., Ferns, PN., Bonser, RHC. and Eccleston, L. (2000) 'Rate of moult affects feather quality: a mechanism linking current reproductive effort to future survival'. Proceedings of the Royal Society of London. Series B: Biological Sciences, 267 (1457). pp. 2093 - 2098. ISSN: 0962-8452
Fang, CM., De Wijs, GA., De Groot, RA., Metselaar, R., Hintzen, HT. and De With, G. (2000)
'O/N ordering in Y
Zhang, J., Fan, Z., Wang, YQ. and Zhou, BL. (2000) 'Effect of cooling rate on the microstructure of hypereutectic Al-Mg2Si alloys'. Journal of Materials Science Letters, 19 (20). pp. 1825 - 1828. ISSN: 0261-8028
Atherton, M., Doorly, DJ. and Collins, MW. (2000) 'A new approach to planning in vitro and in vivo experiments for cardiovascular stents – I. Fundamentals of design procedures (abstract)'. Biomedicine & Pharmacotherapy, 54 (8-9). pp. 437 - 470. ISSN: 0753-3322
Atherton, M., Doorly, DJ. and Collins, MW. (2000) 'A new approach to planning in vitro and in vivo experiments for cardiovascular stents – II. Planning of experiment (abstract)'. Biomedicine & Pharmacotherapy, 54 (8-9). pp. 437 - 470. ISSN: 0753-3322 Open Access Link
Ji, S. and Fan, Z. (2000) 'Microstructural evolution of semisolid Sn-15wt%Pb alloy under high shear rate and high intensity of turbulence'.the 6th Intl Conf. on Semi-Solid Processing of Alloys and Composites. Turin, Italy. 20 - 29 September. Edimet. pp. 723 - 729.
Frey, SD., Harrison, DJ. and Billett, EH. (2000) 'Environmental assessment of electronic products using LCA and ecological footprint'.International Congress and Exhibition on Electronics Goes Green 2000+: A Challenge for the Millenium. Berlin, GERMANY. 11 - 13 September. V D E - VERLAG GMBH. pp. 253 - 258.
Wang, B. and Yang, M. (2000) 'Damping of honeycomb sandwich beams'. Journal of Materials Processing Technology, 105 (1). pp. 67 - 72. ISSN: 0924-0136
Djoudi, MS. and Bahai, H. (2000) 'Physical parameter modifications for specified frequencies'.5th International Conference on Computational Structures Technology/2nd International Conference on Engineering Computational Technology. Leuven, Belgium. 6 - 8 September. Civil-Comp Press. pp. 135 - 140. ISSN: 1759-3433
Djoudi, MS. and Bahai, H. (2000) 'A shell finite element for the general analysis of circular cylindrical shells'.5th International Conference on Computational Structures Technology/2nd International Conference on Engineering Computational Technology. Leuven, Belgium. 6 - 8 September. Civil-Comp Press. pp. 191 - 197. ISSN: 1759-3433