IMM
ZAI, L., TONG, X., WANG, Y. and XUE, X-H. (2024) 'Effect of addition temperature on dispersion behavior and grain refinement efficiency of MgO introduced into Mg alloy'. Transactions of Nonferrous Metals Society of China, 34 (8). pp. 2491 - 2506. ISSN: 1003-6326
Kalganova, T., Fernandez-Hart, T. and Knight, JC. (2024) 'Exploring 8-bit Arithmetic for Training Spiking Neural Networks'.IEEE International Conference on Omni-layer Intelligent Systems (COINS). London, UK. 29 - 31 July. IEEE. pp. 1 - 7. ISSN: 2996-5322 Open Access Link
Wen, T., Li, Z., Wang, J., Yang, F., Zhu, M., Luo, Y., et al. (2024) 'CALPHAD aided design of a crack-free Al-Mg-Si-Ti alloy with high strength: heterogeneous nucleation and eutectic filling during additive manufacturing'. Virtual and Physical Prototyping, 19 (1). pp. 1 - 13. ISSN: 1745-2759 Open Access Link
Sohaib, RM., Onireti, O., Tan, K., Sambo, Y., Swash, R. and Imran, M. (2024) 'Meta-Transfer Learning-Based Handover Optimization for V2N Communication'. IEEE Transactions on Vehicular Technology, 0 (early access). pp. 1 - 15. ISSN: 0018-9545 Open Access Link
Chankitmunkong, S., Eskin, DG., Patakham, U., Chancharoen, W., Seehanam, S., Limmaneevichitr, C. and et al. (2024) 'The improvement of deformability in AA7075 alloy through cryogenic treatment and its correlation with microstructural evolution and FE modelling'. Scientific Reports, 14 (1). pp. 1 - 10. ISSN: 2045-2322 Open Access Link
Shourideh, M., Yasseri, S. and Bahai, H. (2024) 'Safety culture influence on safety performance of a post-combustion carbon capture facility'. Heliyon, 10 (14). pp. 1 - 14. ISSN: 2405-8440 Open Access Link
Bumanis, G., Vitola, L., Zhou, X., Vaičiukynienė, D. and Bajare, D. (2024) 'Towards 3D Pore Structure of Porous Gypsum Cement Pozzolan Ternary Binder by Micro-Computed Tomography'. Journal of Composites Science, 8 (7). pp. 1 - 11.Open Access Link
Dunić, V., Gubeljak, N., Živković, M., Milovanović, V., Jagarinec, D. and Djordjevic, N. (2024) 'Experimental Characterization and Phase-Field Damage Modeling of Ductile Fracture in AISI 316L'. Metals, 14 (7). pp. 1 - 17.Open Access Link
Fu, W., Xiong, H., Liao, Z., Ma, J., Fu, Y. and Wang, B. (2024) 'A 3D Elastoplastic Constitutive Model Considering Progressive Damage Behavior for Thermoplastic Composites of T700/PEEK'. Materials, 17 (13). pp. 1` - 22. ISSN: 1996-1944 Open Access Link
Wiese, B., Mendis, CL., Tolnai, D. and Hort, N. (2024) 'Interactions of CaO with pure Mg and Mg-Ca alloys—an in situ synchrotron radiation diffraction study'. Journal of Physics: Materials, 7 (3). pp. 1 - 11.Open Access Link
Mourtzis, D., Stavropoulos, P. and Pei, E. (2024) 'From data collection to advanced analytics and wisdom creation in manufacturing processes', in Mourtzis, D. (ed.) Manufacturing from Industry 4.0 to Industry 5.0: Advances and Applications. Amsterdam : Elsevier. pp. 431 - 462. ISBN 10: 0-443-13923-7. ISBN 13: 978-0-443-13924-6.
Huang, L., Miron, A., Hone, K. and Li, Y. (2024) 'Segmenting Medical Images: From UNet to Res-UNet and nnUNet'.2024 IEEE 37th International Symposium on Computer-Based Medical Systems (CBMS). Guadalajara, Mexico. 26 - 28 June. IEEE. pp. 483 - 489. ISSN: 2372-918X Open Access Link
Fayyad, N., Lam, B., Evans, R. and Choi, Y. (2024) 'Workplace wellbeing and interior design: A systematic literature review'.DRS2024. Boston, MA, USA. 24 - 28 June. Design Research Society. pp. 1 - 21. ISSN: 2398-3132 Open Access Link
van Alkemade, I., Fernandez, SJ., Kordian, P., Kyriakopoulos, N., Choi, Y. and Kim, E. (2024) 'How to respond to Change? Evidence of Cultural Organizations in Times of COVID-19'.DRS2024: Boston. Boston, MA, USA. 24 - 28 June. Design Research Society. pp. 1 - 17. ISSN: 2398-3132 Open Access Link
Zare, L., Rahmani, M., Khaleghi, N., Sheykhivand, S. and Danishvar, S. (2024) 'Automatic Detection of Acute Leukemia (ALL and AML) Utilizing Customized Deep Graph Convolutional Neural Networks'. Bioengineering, 11 (7). pp. 1 - 19. ISSN: 2306-5354 Open Access Link
Markatos, NG., Mousavi, A., Katsou, E., Pippione, G. and Paoletti, R. (2024) 'Feature Selection to address High-Dimensionality in Industry 4.0 Multi-emitter Laser Modules Assembly Lines'. IEEE Intelligent Systems, 0 (early access). pp. 1 - 12. ISSN: 1541-1672 Open Access Link
Yang, F-P., Wen, T., Zhang, L., Wang, J-Y., Huang, S-L., Ji, S-X. and et al. (2024) 'Role of inclination angle on columnar-to-equiaxed transition in the eutectic Al-5Mg-2Si alloy fabricated by laser powder bed fusion'. Journal of Central South University, 31 (7). pp. 2150 - 2166. ISSN: 2095-2899
Webb, C., Anguilano, L., Troisi, G. and Schmidt Rivera, X. (2024) 'Life cycle environmental evaluation of medical oxygen masks in the UK'. Journal of Cleaner Production, 467. pp. 1 - 16. ISSN: 0959-6526 Open Access Link
Kaur, A., Morton, JA., Tyurnina, AV., Priyadarshi, A., Ghorbani, M., Mi, J., et al. (2024) 'Dual frequency ultrasonic liquid phase exfoliation method for the production of few layer graphene in green solvents'. Ultrasonics Sonochemistry, 108. pp. 1 - 11. ISSN: 1350-4177 Open Access Link
Arzomand, K., Rustell, M. and Kalganova, T. (2024) 'From ruins to reconstruction: Harnessing text-to-image AI for restoring historical architectures'. Challenge Journal of Structural Mechanics, 10 (2). pp. 69 - 85.Open Access Link
Wang, A., Wang, J., Yang, F., Wen, T., Zhu, M., Luo, Y., et al. (2024)
'Laser-powder bed fusion of Y
Mikhailov, SE. (2024) 'Spatially-Periodic Solutions for Evolution Anisotropic Variable-Coefficient Navier–Stokes Equations: I. Weak Solution Existence'. Mathematics, 12 (12). pp. 1 - 27.Open Access Link
Colecchia, F., Ceschin, F. and Harrison, D. (2024) 'Interdisciplinary integrative capabilities as a catalyst of responsible technology-enabled innovation: A higher education case study of Design MSc dissertation projects'. International Journal of Technology and Design Education, 35 (1). pp. 359 - 381. ISSN: 0957-7572 Open Access Link
Rahmani, M., Mohajelin, F., Khaleghi, N., Sheykhivand, S. and Danishvar, S. (2024) 'An Automatic Lie Detection Model Using EEG Signals Based on the Combination of Type 2 Fuzzy Sets and Deep Graph Convolutional Networks'. Sensors, 24 (11). pp. 1 - 17. ISSN: 1424-8220 Open Access Link
Gou, N., Cheng, K. and Huo, D. (2024) 'Design and analysis methods for aerostatic bearings: The past, the present, and the future'. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 238 (10). pp. 1198 - 1211. ISSN: 1350-6501
Zhang, Y., Zhang, S., Luo, S., Guan, X., Wang, Y., Zhu, J., et al. (2024) 'Construction of rigid-flexible interpenetrating network in carbonated magnesium slag composites by in-situ polymerization of acrylamide'. Construction and Building Materials, 435. pp. 1 - 15. ISSN: 0950-0618
Rasekh, M., Pisapia, F., Hafizi, S. and Rees, D. (2024) 'Filtering Efficiency and Design Properties of Medical- and Non-Medical-Grade Face Masks: A Multiscale Modeling Approach'. Applied Sciences, 14 (11). pp. 1 - 20.Open Access Link
Vignjević, R., De-Vuyst, T. and Đorđević, N. (2024) 'Modelling of damage in composites using smooth particle hydrodynamics method'. Journal of the Serbian Society for Computational Mechanics, 18 (1). pp. 45 - 66. ISSN: 1820-6530 Open Access Link
Jovičić, G., Vulović, A., Vukićević, A., Djordjevic, N. and Filipović, N. (2024) 'Fatigue Analysis Based On Fatigue Failure Approach And Damage Tolerant Approach In Coronary Stent Design'. Journal of the Serbian Society for Computational Mechanics, 18 (1). pp. 130 - 144. ISSN: 1820-6530 Open Access Link
Fernandez-Hart, TJ., Knight, JC. and Kalganova, T. (2024) 'Posit and floating-point based Izhikevich neuron: A Comparison of arithmetic'. Neurocomputing, 597. pp. 1 - 15. ISSN: 0925-2312 Open Access Link
Pei, E. and Lakomiec, M. (2024) 'Standardisation efforts of ISO/TC 261 “additive manufacturing” 23rd plenary meeting of ISO/TC 261 “additive manufacturing”'. Progress in Additive Manufacturing, 0 (ahead of print). pp. 1 - 2. ISSN: 2363-9512 Open Access Link
Ayele, TG., Demissie, BM. and Mikhailov, SE. (2024) 'Boundary-Domain Integral Equations for Variable-Coefficient Helmholtz BVPs in 2D'. Journal of Mathematical Sciences, 280 (3). pp. 330 - 355. ISSN: 1072-3374 Open Access Link
Ahmad, A., Ibrahim, R., Zainoridin, H., Hong, CB. and Cheng, K. (2024) 'An Analysis of Chip Formation and Hole Circularity in Drilling Applications: An Aircraft Components Perspective'. Journal of Advanced Research in Applied Mechanics, 118 (1). pp. 28 - 39.Open Access Link
Bhardwaj, M., Chong, TP., Paruchuri, C. and Joseph, P. (2024) 'Noise decomposition of dual synchronized propellers in hover'.30th AIAA/CEAS Aeroacoustics Conference (2024). Rome, Italy. 30 - 7 June. American Institute of Aeronautics and Astronautics.Open Access Link
Gou, N., Liu, S., Christopher, D. and Cheng, K. (2024) 'Development of the Digital Twin for the Ultraprecision Diamond Turning System and Its Application Perspectives', in Lyu, Z. (ed.) Handbook of Digital Twins. Abingdon : Routledge. pp. 498 - 514. ISBN 10: 1-003-42572-0. ISBN 13: 978-1-032-54607-0.
Sukpe, P., Vignjevic, R., Hughes, K. and Kulka, R. (2024) 'Experimental Investigation of Crack Tip Constraint Effects on Fracture Assessment of API 5L X65 Steel Grade for Low-Temperature Applications (−120°C)'. Journal of Testing and Evaluation, 52 (4). pp. 2083 - 2104. ISSN: 0090-3973 Open Access Link
Zai, L., Tong, X., Wang, Y., Zhang, H. and Xue, X. (2024) 'Achieving columnar-to-equiaxed transition to reduce hot cracking susceptibility in TIG-welded AZ31 alloy through MgO modification'. Journal of Materials Science, 59 (21). pp. 9361 - 9370. ISSN: 0022-2461
Vadakke Madam, S., Manani, S. and Eskin, DG. (2024)
'Microstructural Evolution and Property Evaluation of In Situ Al–MgAl
Salimi, M., Teyeb, A., El Masri, E., Hoque, S., Carr, P., Balachandran, W. and et al. (2024) 'Experimental and Numerical Investigation of the Use of Ultrasonic Waves to Assist Laser Welding'. Materials, 17 (11). pp. 1 - 15. ISSN: 1996-1944 Open Access Link
Yang, R., Yang, Q., Chen, D., Wang, F. and Qiu, Y. (2024) 'Explaining Deep Learning Models for COVID-19 Detection with Grad-CAM and Novel Use of PCA'.2024 IEEE International Instrumentation and Measurement Technology Conference (I2MTC). Glasgow, UK. 20 - 23 May. IEEE. pp. 1 - 6. ISSN: 2642-2069 Open Access Link
Al-Zu'bi, M., Fan, M., Bertolesi, E. and Anguilano, L. (2024) 'A review on retrofitting concrete members with near-surface mounted-fiber reinforced polymer composites'. Structural Concrete, 25 (3). pp. 2242 - 2268. ISSN: 1464-4177
Secco, EL. and Noh, Y. (2024) 'Editorial: Human-like robotic hands for biomedical applications and beyond'. Frontiers in Robotics and AI, 11. pp. 1 - 2. ISSN: 2296-9144 Open Access Link
Giacomin, J. (2024) 'Future Autonomous Road Vehicles'. London: Routledge. ISSN 10: 1-032-72423-4 ISSN 13: 978-1-032-72422-5
Starodubov, D., Danishvar, S., Abu Ebayyeh, AARM. and Mousavi, A. (2024) 'Advancements in PCB Components Recognition Using WaferCaps: A Data Fusion and Deep Learning Approach'. Electronics, 13 (10). pp. 1 - 18. ISSN: 1450-5843 Open Access Link
Ren, Y., Liu, X. and Wang, B. (2024) 'Mass Optimization of Crane Box Girder Considering Both Ribs and Diaphragms using APDL'. International Journal of Steel Structures, 24 (3). pp. 672 - 692. ISSN: 1598-2351 Open Access Link
Jin, K., Wu, C., Xiong, Z., Wang, D., Zhou, X. and Chen, X. (2024) 'Impact of Cl- on the performance of magnesium oxysulfate (MOS) cement'. Construction and Building Materials, 430. pp. 1 - 16. ISSN: 0950-0618
Jang, Y. and Shaw, S. (2024) 'Discontinuous Galerkin finite element method for dynamic viscoelasticity models of power-law type'. Numerical Methods for Partial Differential Equations, 0 (ahead of print). pp. 1 - 33. ISSN: 0749-159X Open Access Link
Bendo, A., Fellowes, J., Smith, M., Moshtaghi, M., Jin, Z., Matsuda, K., et al. (2024) 'Solute micro-segregation profile and associated precipitation in cast Al-Mg-Si alloy'. Philosophical Magazine, 104 (19-20). pp. 801 - 827. ISSN: 1478-6435 Open Access Link
Ali, A., Jawad, S., Ali, AH. and Winter, M. (2024) 'Stability analysis for the phytoplankton-zooplankton model with depletion of dissolved oxygen and strong Allee effects'. Results in Engineering, 22. pp. 1 - 15. ISSN: 2590-1230 Open Access Link
Wen, T., Li, Z., Wang, J., Luo, Y., Yang, F., Liu, Z., et al. (2024)
'From crack-prone to crack-free: Eliminating cracks in additively manufacturing of high-strength Mg
Chong, TP. and Muhammad, C. (2024) 'On the enhancement and suppression of turbulent wall pressure by Large Eddy BreakUp Devices'. Physics of Fluids, 36 (4). pp. 1 - 15. ISSN: 1070-6631 Open Access Link