Vignjevic, R. and Meo, M. (2002) 'A new concept for a helicopter sub-floor structure crashworthy in impacts on water and rigid surfaces'. International Journal of Crashworthiness, 7 (3). pp. 321 - 330. ISSN: 1358-8265

Jones, N., Harrison, D., Chiodo, J. and Billett, E. (2002) 'Design for automotive glass removal using active disassembly'.International Body Engineering Conference & Exhibition and Automotive & Transportation Technology Congress. SAE International. ISSN: 0148-7191

Uzunsoy, D., Chang, ITH. and Bowen, P. (2002) 'Microstructural evolution and mechanical properties of Rapidsteel 2.0'. Powder Metallurgy, 45 (3). pp. 251 - 254. ISSN: 0032-5899

Afseth, A., Nordlien, JH., Scamans, GM. and Nisancioglu, K. (2002) 'Effect of heat treatment on electrochemical behaviour of aluminium alloy AA3005'. Corrosion Science, 44 (1). pp. 145 - 162. ISSN: 0010-938X

Scamans, GM., Afseth, A., Thompson, GE. and Zhou, X. (2002) 'Ultra-fine grain sized mechanically alloyed surface layers on aluminium alloys'. Trans Tech Publications, Ltd.. pp. 1461 - 1466. ISSN: 0255-5476

Miller, JF., Kalganova, T., Job, D. and Lipnitskaya, N. (2002) 'The Genetic Algorithm as a Discovery Engine', inCreative Evolutionary Systems. Elsevier. pp. 443 - 466. ISBN 13: 9781558606739.

Martin, VA., Lycett, M. and Macredie, R. (2002) 'Integrating Information Systems', inIFIP Advances in Information and Communication Technology. Springer US. pp. 109 - 118. ISBN 13: 9781475761115.

Fang, CM. and With, GD. (2002) 'Crystal structure and chemical bonding of the high-pressure phase of MgAl2O4 from first-principles calculations'. Philosophical Magazine A: Physics of Condensed Matter, Structure, Defects and Mechanical Properties, 82 (15). pp. 2885 - 2894. ISSN: 0141-8610

De Wijs, GA., Fang, CM., Kresse, G. and De With, G. (2002) 'First-principles calculation of the phonon spectrum of (formula presented) spinel'. Physical Review B - Condensed Matter and Materials Physics, 65 (9). pp. 1 - 5. ISSN: 1098-0121

Li, GQ., Zhou, XM. and Ding, X. (2002) 'Experimental and theoretical studies on steel-concrete hybrid structures'.3rd International Conference on Advances in Steel Structures. HONG KONG, PEOPLES R CHINA. 1 - 11 December. ELSEVIER SCIENCE BV. pp. 599 - 606.

Huang, Y., Humphreys, FJ. and Brough, I. (2002) 'The application of a hot deformation SEM stage, backscattered electron imaging and EBSD to the study of thermomechanical processing'. Journal of Microscopy, 208 (1). pp. 18 - 23. ISSN: 0022-2720

Serguieva, A. and Kalganova, T. (2002) 'A neuro-fuzzy-evolutionary classifier of low-risk investments'.11th IEEE International Conference on Fuzzy Systems. Honolulu, HI. 1 - 17 May. IEEE. pp. 997 - 1002. ISSN: 1098-7584 Open Access Link

Fang, CM. and De With, G. (2002) 'Crystal structure and chemical bonding of the high- pressure phase of MgAl2O4from first-principles calculations'. Philosophical Magazine A: Physics of Condensed Matter, Structure, Defects and Mechanical Properties, 82 (15). pp. 2885 - 2894. ISSN: 0141-8610

Silver, J., Fern, GR., Miller, JR., Slade, E., Ahmet, M., Houlton, A., Evans, DJ. and Leigh, GJ. et al. (2001) 'Electrostatic field effects manifested in ferrocenyl metal complexes and the crystal structure of [Fe(η5-C5H5)(η5-C5H4CHNNHC5H4N]·HCl'. Journal of Organometallic Chemistry, 637. pp. 311 - 317. ISSN: 0022-328X

Cheng, K., Luo, X. and Webb, D. (2001) 'A novel systematic approach to modeling precision-machined surfaces based on mathematical transforms'. Laser Metrology and Machine Performance V. pp. 259 - 268.

Chang, ITH., Uzunsoy, D. and Bowen, P. (2001) 'The influence of sintering atmosphere on the microstructure of RAPIDSTEEL 2.0 materials'. Advances in Powder Metallurgy and Particulate Materials. pp. 922 - 931. ISSN: 1042-8860

Liu, ZY., Hriljac, JA., Chang, ITH., Jones, IP. and Harris, IR. (2001) 'Crystallisation of oxygen-stabilised amorphous phase in a Zr50Cu50 alloy'. Intermetallics, 9 (12). pp. 1029 - 1036. ISSN: 0966-9795

Srivastava, D., Chang, ITH. and Loretto, MH. (2001) 'The effect of process parameters and heat treatment on the microstructure of direct laser fabricated TiAl alloy samples'. Intermetallics, 9 (12). pp. 1003 - 1013. ISSN: 0966-9795

Chang, ITH. and Liu, YJ. (2001) 'Effect of Ni addition to the formation and crystallization of mechanically alloyed amorphous fezrb powders'. Advances in Powder Metallurgy and Particulate Materials. pp. 1749 - 1759. ISSN: 1042-8860

Eskin, DG., Zadeima, Y. and Katgerman, L. (2001) 'Linear shrinkage in the crystallization range of binary and commercial aluminum alloys'. Izvestiya Vysshikh Uchebnykh Zavedenij. Tsvetnaya Metallurgiya. pp. 61 - 67. ISSN: 0021-3438

Afseth, A., Nordlien, JH., Scamans, GM. and Nisancioglu, K. (2001) 'Influence of heat treatment and surface conditioning on filiform corrosion of aluminium alloys AA3005 and AA5754'. Corrosion Science, 43 (12). pp. 2359 - 2377. ISSN: 0010-938X

Vignjevic, R., De Vuyst, T. and Gourma, M. (2001) 'On interpolation in SPH'. CMES - Computer Modeling in Engineering and Sciences, 2 (3). pp. 319 - 336. ISSN: 1526-1492

Gan, TH., Hutchins, DA., Carpenter, PW. and Billson, DR. (2001) 'Simultaneous reconstruction of flow and temperature cross-sections in gas jets using air-coupled tomography'.IEEE International Ultrasonic Symposium. ATLANTA, GA. 1 - 10 October. IEEE. pp. 623 - 626. ISSN: 1051-0117

Ji, S., Wan, L. and Fan, Z. (2001) 'The toxic compounds and leaching characteristics of spent foundry sands'. Water, Air, and Soil Pollution, 132 (3-4). pp. 347 - 364. ISSN: 0049-6979

Aldrich, DE. and Fan, Z. (2001) 'Microstructural characterisation of interpenetrating nickel/alumina composites'. Materials Characterization, 47 (3-4). pp. 167 - 173. ISSN: 1044-5803

Jones, E., Stanton, NA. and Harrison, DJ. (2001) 'Applying structured methods to eco-innovation: An evaluation of the product ideas tree diagram'. Design Studies, 22 (6). pp. 519 - 542. ISSN: 0142-694X Open Access Link

Lu, G., Wang, B. and Zhang, T. (2001) 'Taylor impact test for ductile porous materials - Part 1: Theory'. International Journal of Impact Engineering, 25 (10). pp. 981 - 991. ISSN: 0734-743X

Li, G., Ding, X., Shen, L. and Zhou, X. (2001) 'Parametric Study on the Limit of Inter-storey Drift Ratio of Steel-Concrete Hybrid High-rise Buildings'.8th National Symposium on Aseismic Design and Technology of High-rise Buildings. Nanning, China. 1 Proceedings of the 8th National Symposium on Aseismic Design and Technology of High-rise Buildings. pp. 14 - 24.

Huang, Y. and Humphreys, FJ. (2001) 'Measurements of subgrain growth in a single-phase aluminum alloy by high-resolution EBSD'. Materials Characterization, 47 (3-4). pp. 235 - 240. ISSN: 1044-5803

Afseth, A., Nordlien, JH., Scamans, GM. and Nisancioglu, K. (2001) 'Effect of heat treatment on filiform corrosion of aluminium alloy AA3005'. Corrosion Science, 43 (11). pp. 2093 - 2109. ISSN: 0010-938X

Martinez-Rubio, MI., Ireland, TG., Fern, G., Silver, J. and Snowden, MJ. (2001) 'A new application for microgels: Novel method for the synthesis of spherical particles of the Y2O3: Eu phosphor using a copolymer microgel of NIPAM and acrylic acid'. Langmuir, 17 (22). pp. 7145 - 7149. ISSN: 0743-7463 Open Access Link

Silver, J., Frampton, CS., Fern, GR., Davies, DA., Miller, JR. and Sosa-Sanchez, JL. (2001) 'Novel seven coordination geometry of Sn(IV): crystal structures of phthalocyaninato bis(undecylcarboxylato)Sn(IV), its Si(IV) analogue, and phthalocyaninato bis(chloro)silicon(IV). The electrochemistry of the Si(IV) analogue and related compounds'. Inorganic Chemistry, 40 (21). pp. 5434 - 5439. ISSN: 0020-1669 Open Access Link

Bourgeois, L., Mendis, CL., Muddle, BC. and Nie, JF. (2001) 'Characterization of quasicrystalline primary intermetallic particles in Mg-8 wt% Zn-4 wt% Al casting alloy'. Philosophical Magazine Letters, 81 (10). pp. 709 - 718. ISSN: 0950-0839

Peng, HX. and Fan, Z. (2001) 'Immiscible systems produced by squeeze casting of engineered metallic foams'. Journal of Materials Science Letters, 20 (19). pp. 1769 - 1771. ISSN: 0261-8028

Xu, YM. and Mellor, BG. (2001) 'The effect of fillers on the wear resistance of thermoplastic polymeric coatings'. Wear, 251 (1-12). pp. 1522 - 1531. ISSN: 0043-1648

Xu, Y. and Mellor, BG. (2001) 'Instrumented impact testing of polymeric materials'.7th Postgraduate Conference in Engineering Materials. Southampton. University of Southampton. pp. 29 - 30.

Vignjevic, R., Hughes, K., Walker, A. and Taylor, EA. (2001) 'Overcoming element erosion limitations within Lagrangian finite element codes'.3rd European Conference on Space Debris. DARMSTADT, GERMANY. 1 - 21 March. ESA PUBLICATIONS DIVISION C/O ESTEC. pp. 595 - 601. ISSN: 0379-6566

Fan, Z., Bevis, M. and Ji, S. (2001) 'Process and apparatus for manufacturing castings from immiscible metallic liquids'.

Campbell, JC. and Shashkov, MJ. (2001) 'A tensor artificial viscosity using a mimetic finite difference algorithm'. Journal of Computational Physics, 172 (2). pp. 739 - 765. ISSN: 0021-9991

Ghobadian, A., Li, R., Gallear, D., Childerhouse, P. and Naim, M. (2001) 'Supply chain performance assessment using data envelopment analysis'. Cardiff, UK. 5 - 7 September. Proceedings of British Academy of Management Annual Conference.

Ghobadian, A., Woo, H., Gallear, D., Viney, H. and Liu, J. (2001) 'An examination of benchmarking in the finance function'. Cardiff, UK. 5 - 7 September. Proceedings of British Academy of Management Annual Conference.

Song, JH., Kang, YG. and Wang, B. (2001) 'Rapid prototyping and tooling for moulded pulp packaging'.17th National Conference on Manufacturing Research. CARDIFF UNIV, CARDIFF, WALES. 4 - 6 September. PROFESSIONAL ENGINEERING PUBLISHING LTD. pp. 193 - 198.

Silver, J., Martinez-Rubio, MI., Ireland, TG. and Withnall, R. (2001) 'Luminescent properties of rare earth-doped photonic crystals'.Quantum Electronics and Photonics 15. Glasgow. 3 - 6 September. Technical Digest.

Silver, J., Ananadan, S., Davies, DA., Fern, GR., Marsh, PJ., Miller, JR., Titler, PJ. and McCammon, CA. et al. (2001) 'High pressure Mossbauer spectroscopic studies of molecular solids. The importance of 'free' space in molecular lattices'.26th International Conference on the Applications of the Mossbauer Effect. OXFORD, ENGLAND. 2 - 7 September. Kluwer Academic Publications. pp. 109 - 117. ISSN: 0304-3843

Qin, RS. and Fan, Z. (2001) 'Fractal theory study on morphological dependence of viscosity of semisolid slurries'. Materials Science and Technology, 17 (9). pp. 1149 - 1152. ISSN: 0267-0836

She, FH., Chow, S., Wang, B. and Kong, LX. (2001) 'Identification and classification of animal fibres using artificial neural networks'. Seni Kikai Gakkai Shi/Journal of the Textile Machinery Society of Japan, 54 (9). pp. 60 - 63. ISSN: 0371-0580

Huang, Y. and Humphreys, FJ. (2001) 'The effect of solute elements on grain boundary mobility during recrystallization of single-phase aluminium alloys'.1st Joint International Conference on Recrystallization and grain growth. Aachen, Germany. 27 - 31 August. SPRINGER-VERLAG BERLIN. pp. 409 - 414.

Fang, CM., Hintzen, HT., de Groot, RA. and de With, G. (2001) 'ChemInform Abstract: First‐Principles Electronic Structure Calculations of Ba₅Si₂N₆ with Anomalous Si₂N₆ Dimeric Units.'. ChemInform, 32 (34). ISSN: 0931-7597

Evans, PSA., Harrey, PM., Ramsey, BJ. and Harrison, DJ. (2001) 'Lithographic film circuits - A review'. Circuit World, 27 (3). pp. 31 - 34. ISSN: 0305-6120

Ghobadian, A. and Gallear, D. (2001) 'TQM implementation: An empirical examination and proposed generic model'. Omega - International Journal of Management Science, 29 (4). pp. 343 - 359. ISSN: 0305-0483 Open Access Link

Smith, PJ., Cardwell, DA., Babu, NH., Kambara, M. and Shi, YH. (2001) 'Self-seeded melt growth of Au-doped Nd-Ba-Cu-O'. Superconductor Science and Technology, 14 (8). pp. 624 - 630. ISSN: 0953-2048