Noh, Y., Wang, C., Tokumoto, M., Matsuoka, Y., Chihara, T., Ishii, H., Takanishi, A., Takayama, T. and Shoji, S. et al. (2012) 'Development of the airway Management Training System WKA-5: Improvement of mechanical designs for high-fidelity patient simulation'.2012 IEEE International Conference on Robotics and Biomimetics (ROBIO). IEEE. pp. 1224 - 1229.

Wang, C., Noh, Y., Terunaga, C., Tokumoto, M., Yusuke, M., Sher, C., Niibori, A., Ishii, H., Takanishi, A., Hatake, K. and Shoji, S. et al. (2012) 'Development of optic nerve and facial nerve models for cranial nerve examination training'.2012 IEEE/SICE International Symposium on System Integration (SII 2012). Kyushu Univ, Fukuoka, JAPAN. 1 - 18 December. IEEE. pp. 492 - 497.

Wang, C., Noh, Y., Ebihara, K., Terunaga, C., Tokumoto, M., Okuyama, I., Yusuke, M., Ishii, H., Takanishi, A., Hatake, K. and Shoji, S. et al. (2012) 'Development of an arm robot for neurologic examination training'.2012 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS 2012). Algarve, PORTUGAL. 1 - 12 October. IEEE. pp. 1090 - 1095. ISSN: 2153-0858

Bai, Q., He, B., Liang, Y. and Cheng, K. (2012) 'Micro-tensile device and test for micro-wire in MEMS'.18th International Conference on Automation and Computing (ICAC) - Integration of Design and Engineering. Loughborough Univ, Leicestershire, ENGLAND. 26 - 8 September. IEEE. pp. 234 - 237.

Li, W., Ding, H. and Cheng, K. (2012) 'An investigation on the design and performance assessment of double-PID and LQR controllers for the inverted pendulum'.2012 UKACC International Conference on Control (CONTROL). IEEE. pp. 190 - 196.

Hu, ZQ., Cheng, K. and Feng, ZM. (2012) 'Numerical simulation of the component microstructure change through roll forming'.18th International Conference on Automation and Computing (ICAC) - Integration of Design and Engineering. Loughborough Univ, Leicestershire, ENGLAND. 26 - 8 September. IEEE. pp. 254 - 258.

Rotter, KRG., Jensen, F. and Atherton, MA. (2012) 'Noise suffered by the Autistic: Can Mechatronics Help?'.9th France-Japan and 7th Europe-Asia Congress on Mechatronics (MECATRONICS) / 13th International Workshop on Research and Education in Mechatronics (REM). Supmeca, Paris, FRANCE. 21 - 23 November. IEEE. pp. 219 - 224.

Tahhan, A., Dehouche, Z. and Fern, G. (2012) 'Nanostructured Materials for Silicon Solar Cells Grown by PECVD'.World Congress on Sustainable Technologies (WCST). London, ENGLAND. 19 - 20 November. IEEE. pp. 116 - 116.

Zhang, Y., Ma, N., Brian, M., Li, X. and Wang, H. (2012) 'The role of Fe on the grain refinement of high purity aluminium'. Trans Tech Publications, Ltd.. pp. 2264 - 2268. ISSN: 1022-6680

Gulavani, O., Hughes, K. and Vignjevic. (2012) 'COMPUTATIONAL MODELLING TECHNIQUES FOR THE CERTIFICATION OF AN INNOVATIVE AIRCRAFT SEAT AGAINST STATIC COMPLIANCE (CS 25.561)'.Aerospace Structural Impact Dynamics International Conference. Wichita, Kansas. [unpublished]

Xia, M., Huang, Y., Cassinath, Z. and Fan, Z. (2012) 'Continuous twin screw rheo-extrusion of an AZ91D magnesium alloy'. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 43 (11). pp. 4331 - 4344. ISSN: 1073-5623 Open Access Link

Mendis, CL., Oh-Ishi, K. and Hono, K. (2012) 'Microalloying effect on the precipitation processes of Mg-Ca alloys'.Symposium on Approaches for Investigating Phase Transformations at the Atomic Scale. San Diego, CA. 1 - 3 March. Springer Science and Business Media LLC. pp. 3978 - 3987. ISSN: 1073-5623

Vignjevic, R., Djordjevic, N., Campbell, J. and Panov, V. (2012) 'Modelling of dynamic damage and failure in aluminium alloys'. International Journal of Impact Engineering, 49. pp. 61 - 76. ISSN: 0734-743X

Vignjevic, R., Djordjevic, N. and Panov, V. (2012) 'Modelling of dynamic behaviour of orthotropic metals including damage and failure'. International Journal of Plasticity, 38. pp. 47 - 85. ISSN: 0749-6419

Li, Z., Li, L., Duan, L., Lu, KJ. and Shi, Z. (2012) 'Distributed data mining: a survey'. Information Technology and Management, 4 (4). pp. 403 - 409. ISSN: 1936-6442

Ji, S. and Fan, Z. (2012) 'Extruded microstructure of Zn-5 wt-%Al eutectic alloy processed by twin screw extrusion'. Materials Science and Technology (United Kingdom), 28 (11). pp. 1287 - 1294. ISSN: 0267-0836

Gunasekaran, A. and Gallear, D. (2012) 'Special Issue on Sustainable development of manufacturing and services'. International Journal of Production Economics, 140 (1). pp. 1 - 6. ISSN: 0925-5273

Durrell, JH., Dancer, CEJ., Dennis, A., Shi, Y., Xu, Z., Campbell, AM., Babu, NH., Todd, RI., Grovenor, CRM. and Cardwell, DA. et al. (2012) 'A trapped field of >3 T in bulk MgB 2 fabricated by uniaxial hot pressing'. Superconductor Science and Technology, 25 (11). pp. 112002 - 112002. ISSN: 0953-2048

Giacomin, J. and Bertola, D. (2012) 'Human emotional response to energy visualisations'. International Journal of Industrial Ergonomics, 42 (6). pp. 542 - 552. ISSN: 0169-8141 Open Access Link

Dowson, M., Poole, A., Harrison, D. and Gideon, S. (2012) 'Domestic UK retrofit challenge: Barriers, incentives and current performance leading into the green deal'. Energy Policy, 50. pp. 294 - 305. ISSN: 0301-4215 Open Access Link

Mousavi, A., Jan, S., Li, M., Al-Raweshidy, H. and Qi, M. (2012) 'Dealing with Uncertain Entities in Ontology Alignment using Rough Sets'. IEEE Transactions on Systems, Man, and Cybernetics - Part C, 42 (6). pp. 1600 - 1612. ISSN: 1094-6977 Open Access Link

Ji, S., Watson, D., Fan, Z. and White, M. (2012) 'Development of a super ductile diecast Al-Mg-Si alloy'. Materials Science and Engineering A, 556. pp. 824 - 833. ISSN: 0921-5093 Open Access Link

Salimian, A., Fern, GR., Withnall, R. and Silver, J. (2012) 'A novel method for the preparation of non-agglomerated nanometre sized particles of lanthanum phosphate phosphors utilising a high surface area support in the firing process'. Journal of Materials Chemistry, 22 (40). pp. 21529 - 21532. ISSN: 0959-9428 Open Access Link

Noh, Y., Wang, C., Tokumoto, M., Jorge, S., Ishii, H., Takanishi, A., Kazuyuki, H. and Shoji, S. et al. (2012) 'Development of Airway Management training system WKA-4: Provide useful feedback of trainee performance to trainee during Airway Management'.2012 ICME International Conference on Complex Medical Engineering (CME). IEEE. pp. 423 - 428.

Kumar, S., Babu, NH., Scamans, GM., Eskin, DG. and Fan, Z. (2012) 'Solidification behaviour of an AA5754 A1 alloy ingot cast with high impurity content'. International Journal of Materials Research, 103 (10). pp. 1228 - 1234. ISSN: 1862-5282

Fang, CM., Sluiter, MHF., Van Huis, MA. and Zandbergen, HW. (2012) 'Structural and magnetic properties of NiC x and NiN x (x=0 to 13) solid solutions from first-principles calculations'. Physical Review B - Condensed Matter and Materials Physics, 86 (13). ISSN: 1098-0121

Ajovalasit, M., Shabani, A., Tajadura, A. and Giacomin, J. (2012) 'Affective reactions to vibro-tactile events: A case study in automotive applications'. 8th International Conference on Design and Emotion: Out of Control - Proceedings.

Hughes, K., vignjevic. and 8. Carrasco-Muñoz y Guerra, J. (2012) 'Design Exploration for Ultra Thick Laminated Composites'.RAES 3rd Aircraft Structural Design Conference. Delft University.

XIA, M., Huang, Y., Cassinath, Z. and Fan, Z. (2012) 'Rheo-extrusion of AZ91D'.the 12th International Conference on Semi-Solid Processing of Alloys and Composites. Cape Town, South Africa. 8 - 11 October. ttp. pp. 470 - 475. ISSN: 1012-0394

Noh, Y. (Accepted) 'POSITION-DETECTING DEVICE, PROGRAM THEREOF, MONITORING SYSTEM, AND DEVICE FOR TRAINING PERSON TO INSERT TUBE INTO TRACHEA'.

Wang, B., Deshpande, VS. and Langseth, M. (2012) 'Special issue on advances in impact mechanics in honour of Professor Steve Reid'. International Journal of Impact Engineering, 48. pp. 1 - 1. ISSN: 0734-743X

Xue, P., Iqbal, N., Liao, HJ., Wang, B. and Li, YL. (2012) 'Experimental study, on strain rate sensitivity of ductile porous irons'. International Journal of Impact Engineering, 48. pp. 82 - 86. ISSN: 0734-743X

Cheng, K. and Srai, JS. (2012) 'Special issue on sustainable manufacturing and the key enabling technologies'. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 226 (10). pp. 1603. ISSN: 0954-4054

Yan, J., Feng, C. and Cheng, K. (2012) 'Sustainability-oriented product modular design using kernel-based fuzzy c-means clustering and genetic algorithm'. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 226 (10). pp. 1635 - 1647. ISSN: 0954-4054

Yang, LQ., Xu, J., Liu, GJ. and Fan, Z. (2012) 'Formation mechanism of non-dendritic microstructure in rheo-diecast AZ91D magnesium alloy by different stirring speed'. Cailiao Rechuli Xuebao/Transactions of Materials and Heat Treatment, 33 (10). pp. 91 - 95. ISSN: 1009-6264

Mousavi, A. (2012) 'Electronic Business Systems - Modern Enterprise: Design, Manage and Lead”, course book, Brunel University. REVISED VERSION of Electronic Enterprise Systems - Modern Enterprise: Design, Manage and Lead.'.

De Coster, R. and Bateman, RJ. (2012) 'Sustainable product development strategies: Business planning and performance implications'. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 226 (10). pp. 1665 - 1674. ISSN: 0954-4054 Open Access Link

Huang, Y. (2012) 'Steady state deformation and a universal scale law'.E-MRS 2012 Fall Meeting. Warsaw, Poland. 17 - 21 September. [unpublished]

Zhou, X., Dong, W. and Oladiran, O. (2012) 'A Numerical Approach for Predicting Shrinkage Cracking Age of Concrete in Elliptical Ring Tests'.3rd International Conference on the Durability of Concrete Structures. Belfast, Northern Ireland. 17 - 19 September. Queen's University of Belfast. pp. SLM13/1 - SLM13/7.

Mendis, CL., Oh-ishi, K., Ohkubo, T., Shin, KS. and Hono, K. (2012) 'Microstructures and mechanical properties of extruded and heat treated Mg-6Zn-1Si-0.5Mn alloys'. Materials Science and Engineering: A, 553. pp. 1 - 9. ISSN: 0921-5093

Gegov, E., Gegov, A., Postorino, MN., Atherton, M. and Gobet, F. (2012) 'Space-independent community structure detection in United States air transportation'. IFAC Proceedings Volumes (IFAC-PapersOnline), 45 (24). pp. 1 - 6. ISSN: 1474-6670 Open Access Link

He, Q., Ghobadian, A. and Gallear, D. (2012) 'Supply chain knowledge transfer and the role of power: the effects of availability of alternatives and restrained power use and a test of interaction'. Cardiff, UK. 11 - 13 September. Proceedings of the British Academy of Management Annual Conference.

Sermon, PA., Worsley, MP., Cheng, Y., Courtney, L., Shinar-Bush, V., Ruzimuradov, O., Hopwood, AJ., Edwards, MR., Gashi, B., Harrison, D. and Xu, Y. et al. (2012) 'Deterring gun crime materially using forensic coatings'. Forensic Science International, 221 (1-3). pp. 131 - 136. ISSN: 0379-0738

Shaw, S., Whiteman, JR. and Warby, MK. (2012) 'Computational modelling of some problems of elasticity and viscoelasticity with applications to thermoforming processes'. International Journal of Numerical Analysis & Modelling, Series B, 3 (3). pp. 320 - 329. ISSN: 1923-2942 Open Access Link

Hou, J., Bonser, RHC. and Jeronimidis, G. (2012) 'Developing skin analogues for a robotic octopus'. Journal of Bionic Engineering, 9 (3). pp. 385 - 390. ISSN: 1672-6529

Domínguez, C., Stephan, EP. and Maischak, M. (2012) 'A FE-BE coupling for a fluid-structure interaction problem: Hierarchical a posteriori error estimates'. Numerical Methods for Partial Differential Equations, 28 (5). pp. 1417 - 1439. ISSN: 0749-159X

Makanjuola, JK., Aggoun, A., Swash, M., Grange, P., Challacombe, BC. and Dasgupta, P. (2012) '3D-holoscopic imaging: A novel way to enhance imaging in minimally invasive therapy in urological oncology'. Journal of Endourology, 26 (1). pp. A39 - A40. ISSN: 0892-7790

Haghayeghi, R., Bahai, H. and Kapranos, P. (2012) 'Effect of ultrasonic argon degassing on dissolved hydrogen in aluminium alloy'. Materials Letters, 82. pp. 230 - 232. ISSN: 0167-577X

Liu, DB., Huang, Y. and Prangnell, PB. (2012) 'Microstructure and performance of a biodegradable Mg-1Ca-2Zn-1TCP composite fabricated by combined solidification and deformation processing'. Materials Letters, 82. pp. 7 - 9. ISSN: 0167-577X

Dowson, M., Grogan, M., Birks, T., Harrison, D. and Craig, S. (2012) 'Streamlined life cycle assessment of transparent silica aerogel made by supercritical drying'. Applied Energy, 97. pp. 396 - 404. ISSN: 0306-2619 Open Access Link

Bai, QS., Cheng, K., He, B. and Liang, YC. (2012) 'Design of a novel tensile testing device and its application in tensile testing experiments on copper micro wires'. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 226 (9). pp. 1594 - 1600. ISSN: 0954-4054