Kyprianou, A., Mares, C., Charalambous, CD. and Mottershead, JE. (2007) 'Minimum relative entropy criterion for damage detection and location'. Key Engineering Materials, 347. pp. 421 - 426. ISSN: 1013-9826

Falticeanu, CL., Chang, ITH., Kim, JS. and Cook, R. (2007) 'Sintering behaviour of Al-Cu-Mg-Si blends'. Trans Tech Publications Ltd.. pp. 597 - 600. ISSN: 0255-5476

Cook, R., Chang, ITH. and Falticeanu, CL. (2007) 'Aluminium and aluminium alloy powders for P/M applications'. Trans Tech Publications Ltd.. pp. 773 - 776. ISSN: 0255-5476

Jiang, Z., Falticeanu, CL. and Chang, ITH. (2007) 'Warm compression of Al alloy PM blends'. Trans Tech Publications Ltd.. pp. 333 - 336. ISSN: 0255-5476

Robson, JD., Prangnell, PB., McKay, BJ. and Heason, CP. (2007) 'Modelling the precipitation of Al3X dispersoids in aluminium alloys and their effect on recrystallization'. Trans Tech Publications Ltd.. pp. 45 - 54. ISSN: 0255-5476

Yang, YH., Chen, SJ. and Cheng, K. (2007) 'Design and control of a piezo-based fast tool servo system for precision diamond turning'. Trans Tech Publications Ltd.. pp. 195 - 199. ISSN: 1013-9826

Zong, WJ., Li, D., Sun, T. and Cheng, K. (2007) 'Finite Element Method Predicts the Distribution of Cutting Temperature in Diamond Turning'. Trans Tech Publications, Ltd.. pp. 100 - 105. ISSN: 1013-9826

Noh, Y., Segawa, M., Shimomura, A., Ishii, H., Solis, J., Hatake, K. and Takanishi, A. et al. (2007) 'Reproducing difficulties of airway management on patients with restricted mouth opening using the WKA-1'.6th International Special Topic Conference on Information Technology Applications in Biomedicine, 2007. IEEE. pp. 115 - 118.

Pelegrini, AV., Harrison, D. and Shackleton, J. (2007) 'Splitting and managing the solar spectrum for energy efficiency and daylighting'. Portugal SB 2007 - Sustainable Construction, Materials and Practices: Challenge of the Industry for the New Millennium. pp. 451 - 458.

Fang, CM., Ahuja, R. and Eriksson, O. (2007) 'Prediction of MAX phases, VN+1SiCN (N=1,2), from first-principles theory'. Journal of Applied Physics, 101 (1). ISSN: 0021-8979

Yang, Y., Chen, S., Cheng, K. and Sun, X. (2007) 'Diamond turning of microstructured surfaces: modelling and simulation'. International Journal of Nanomanufacturing, 1 (5). pp. 627 - 640. ISSN: 1746-9392

McKay, BJ., Robson, JD., Pragnell, PB. and Heason, CP. (2007) 'Modelling the precipitation of Al3X dispersoids in aluminium alloys and their effect on recrystallization'. Materials Science Forum, 550. pp. 45 - 54. ISSN: 0255-5476

Prangnell, PB., Huang, Y., Berta, M. and Apps, PJ. (2007) 'Mechanisms of formation of submicron grain structures by severe deformation'. Trans Tech Publications Ltd.. pp. 159 - 168. ISSN: 0255-5476

Pei, E., Evans, MA. and Campbell, RI. (2007) 'Them and Us?: Exploring the Collaboration between Industrial Designers and Engineering Designers'.Industrial Designers Society of America International Education Symposium. San Francisco.

Pei, E., Campbell, RI. and Evans, MA. (2007) 'Investigating Collaboration between Industrial designers and Engineering Designers: A Singapore Context'.International Conference on Manufacturing Automation. Singapore.

Huo, D. and Cheng, K. (2007) 'Modelling and control of two-axis direct drive slides with application to nano/micro machining'. Proceedings of the 7th International Conference European Society for Precision Engineering and Nanotechnology, EUSPEN 2007. pp. 81 - 84.

Mohd Nor, MK., Huo, D. and Cheng, K. (2007) 'A PC-based control system for multiple-axis micro/nano machining: Control architecture and implementations'. Laser Metrology and Machine Performance VIII - 8th International Conference and Exhibition on Laser Metrology, Machine Tool, CMM and Robotic Performance, LAMDAMAP 2007. pp. 289 - 298.

Gallear, D., Ghobadian, A., Thomas, H. and O'Regan, N. (2007) 'Introductory Chapter: Hierarchy of strategy - state of play'. Management Decision, 45 (3). pp. 318 - 326.

Lu, KJ. (2007) 'Distributed classification in peer-to-peer networks'.ACM SIGKDD. San Jose, California, USA.

Vezzoli, C., Ceschin, F. and Tukker, A. (2007) 'Framework for Action for Sustainable Consumption and Production (SCP) in the fields of Food, Mobility and Energy/Housing. Proceedings of the SCORE! (Sustainable Consumption Research Exchange!) conference'.Framework for Action for Sustainable Consumption and Production (SCP) in the fields of Food, Mobility and Energy/Housing.. Milan, Italy.

Hone, KS., Lines, L. and Ikechi, O. (2007) 'Accessing e-Government Services: Design Requirements for the Older User'. Lecture Notes in Computing Science, 4556. pp. 932 - 940. ISSN: 0302-9743

Katgerman, L. and Eskin, DG. (2007) 'Contraction behaviour of aluminium alloys during solidification'. Internation Foundry Research, 59 (2). pp. 8 - 13.

Eskin, D., Nadella, R. and Katgerman, L. (2007) 'Role of grain refinement in hot tearing and macrosegregation in direct-chill cast AA7075 billets'. Materials Science and Technology, 23 (11). pp. 1327 - 1335. ISSN: 0267-0836

Kim, JS., Chang, IT., Falticeanu, CL., Davies, GJ. and Jiang, KC. (2007) 'A study of debinding behavior and microstructural development of sintered Al-Cu-Sn alloy'. Trans Tech Publications Ltd.. pp. 769 - 772. ISSN: 0255-5476

Kim, JS., Jiang, KC., Falticeanu, L., Davies, GJ. and Chang, I. (2007) 'Making alumina microcomponents from Al powder'. Trans Tech Publications Ltd.. pp. 1041 - 1044. ISSN: 0255-5476

Du, Q., Eskin, DG. and Katgerman, L. (2006) 'Modelling macrosegregation during DC casting of a binary aluminium alloy'. Modeling of Casting, Welding and Advanced Solidification Processes - XI, 1. pp. 235 - 242.

Silver, J., Withnall, R., Fern, GR., Marsh, PJ., Ireland, TG. and Salimian, A. (2006) 'Correlating the ACEL performance of phosphor powders ZnS:Cu,X(X = Cl, Br) with their charge trap characteristics'.13th International Display Workshop (IDW'06). Otsu, Japan. 6 - 8 December. INST IMAGE INFORMATION & TELEVISION ENGINEERS. pp. 421 - 422.

Wang, B., Zheng, J. and Shu, D. (2006) 'Dynamic strength and strain rate sensitivity of 37 wt% Pb 63 wt% Sn eutectic solders'.6th Asia-Pacific Symposium on Engineering Plasticity and its Applications (AEPA2002). UNIV SYDNEY, SYDNEY, AUSTRALIA. 6 - 8 December. Trans Tech Publications, Ltd.. pp. 181 - 186. ISSN: 1013-9826

Xu, Y. and Hutchings, IM. (2006) 'Cold spray deposition of thermoplastic powder'. Surface and Coatings Technology, 201 (6). pp. 3044 - 3050. ISSN: 0257-8972

Diamond, GG., Hutchins, DA., Gan, TH., Purnell, P. and Leong, KK. (2006) 'Single-sided capacitive imaging for NDT'. Insight: Non-Destructive Testing and Condition Monitoring, 48 (12). pp. 724 - 730. ISSN: 1354-2575

Mohd Hussin, Z., Cheng, K. and Huo, D. (2006) 'On-line Modal Identification of a CNC Machining System based on Surface Roughness Laser Scattering: Theoretical Perspectives'. . pp. 191 - 197.

Zhang, SM., Zhen, Z. and Fan, Z. (2006) 'Direct Chill Rheocasting (DCRC) and extrusion of AZ31 Mg-Alloy'. Institute of Cast Metals Engineers - 67th World Foundry Congress, wfc06: Casting the Future. pp. 1128 - 1137.

Wang, Y., Liu, G. and Fan, Z. (2006) 'Mechanical properties and microstructural evolution of rheo-diecast AZ91D magnesium alloy during heat treatment'. Institute of Cast Metals Engineers - 67th World Foundry Congress, wfc06: Casting the Future. pp. 295 - 304.

Fang, X., Patel, J. and Fan, Z. (2006) 'Microstructure and mechanical properties of rheo-diecast (RDC) aluminium alloys'. Institute of Cast Metals Engineers - 67th World Foundry Congress, wfc06: Casting the Future. pp. 1109 - 1118.

Mendis, CL., Muddle, BC. and Nie, JF. (2006) 'Characterization of intermetallic particles in a Mg-8Zn-4Al-0.5Ca (wt%) casting alloy'. Philosophical Magazine Letters, 86 (12). pp. 755 - 762. ISSN: 0950-0839

Chong, TP., Joseph, PF. and Davies, POAL. (2006) 'Design of a quiet open jet facility for the measurement of aerofoil noise'. Institute of Acoustics - Spring Conference Futures in Acoustics 2006: Today's Research - Tomorrow's Careers. pp. 149 - 158.

Vignjevic, R., Millett, JCF., Bourne, NK., Meziere, Y. and Lukyanov, A. (2006) 'The behaviour of a carbon-fibre epoxy composite under shock loading'.SHOCK COMPRESSION OF CONDENSED MATTER - 2005: Proceedings of the Conference of the American Physical Society Topical Group on Shock Compression of Condensed Matter. Baltimore, MD. 1 - 5 August. AIP. pp. 825 - 828. ISSN: 0094-243X

Panov, V., Vignjevic, R., Bourne, N. and Millet, J. (2006) 'Material failure modelling in metals at high strain rates'.SHOCK COMPRESSION OF CONDENSED MATTER - 2005: Proceedings of the Conference of the American Physical Society Topical Group on Shock Compression of Condensed Matter. Baltimore, MD. 1 - 5 August. AIP. pp. 646 - 649. ISSN: 0094-243X

Mares, C. and Lockerby, D. (2006) 'Developing professional skills through group design projects and participation in student competitions'. Proceedings of the International Conference on Innovation, Good Practice and Research in Engineering Education 2006, EE 2006. pp. 323 - 325.

Hone, K. and Axelrod, L. (2006) 'Human factors evaluation of systems that recognise and respond to user emotion'. Contemporary Ergonomics 2006. pp. 208 - 212.

Kanis, M., Brinkman, WP. and MacRedie, R. (2006) 'Facilitating socio-pleasure as mediated by ubiquitous technology'.ECCE06: The Thirteenth European Conference on Cognitive Ergonomics. ACM. pp. 117 - 118.

Silver, J., Withnall, R., Staple, A., Lipman, A., Ireland, T., Fern, GR., Harris, PG., English, RJ. and Heaton, JR. et al. (2006) 'Development of printable phosphor inks for high definition displays'. Digest of Technical Papers - SID International Symposium. pp. 1275 - 1278. ISSN: 0097-966X

Silver, J., Withnall, R., Marsh, PJ., Lipman, A., Ireland, T. and Fern, GR. (2006) 'High density packing of submicrometer spherical particles of the y 2O3: Eu³⁺ phosphor for low voltage FPDs'. Digest of Technical Papers - SID International Symposium. pp. 648 - 651. ISSN: 0097-966X

Shen, Y. and Atherton, MA. (2006) 'Investigation on electro-acoustic characteristics of a MEMS microfluidic ultrasonic separator'.IET Seminar on MEMS Sensors and Actuators. IEE. pp. 39 - 46.

Cheesewright, R. and Shaw, S. (2006) 'Uncertainties associated with finite element modelling of Coriolis mass flow meters'. Flow Measurement and Instrumentation, 17 (6). pp. 335 - 347. ISSN: 0955-5986

Rees, A., Dimov, SS., Ivanov, A., Herrero, A. and Uriarte, LG. (2006) 'Micro EDM: Accuracy of on-the-machine dressed electrodes', in Menz, W., Dimov, SS. and Fillon, B. (eds.) 4M 2006: Second International Conference on Multi-Material Micro Manufacture. Elsevier Science. pp. 361 - 364. ISBN 10: 0080452639. ISBN 13: 9780080452630.

Reza-Shabgard, M., Ivanov, A. and Rees, A. (2006) 'Influence of EDM machining on surface integrity of WC-Co', in Menz, W., Dimov, SS. and Fillon, B. (eds.) 4M 2006: Second International Conference on Multi-Material Micro Manufacture. Elsevier Science. pp. 331 - 334. ISBN 10: 0080452639. ISBN 13: 9780080452630.

Loong, CK., Kolesnikov, AI., Koyanaka, H., Takeuchi, K. and Fang, C. (2006) 'Extraction of metals from natural waters: A neutron characterization of the nanostructured manganese-oxide-based adsorbents'. Physica B: Condensed Matter, 385-386 I. pp. 493 - 495. ISSN: 0921-4526

Tavakoli, S. and Mousavi, A. (2006) 'Input variable monitoring for quick-response decision making in volatile systems'.Virtual Concept 2006. Cancun, Mexico. 26 - 1 December. Proceedings of Virtual Concept 2006.

Perry, MA., Bates, RA., Atherton, MA. and Oldfield, M. (2006) 'Analytical sensitivity analysis using COMSOL: Model development, validation and results'.COMSOL UK Users Conference. Birmingham. 16 [unpublished]