Balart, MJ., Patel, JB. and Fan, Z. (2015) 'Grain refinement of DHP copper by particle inoculation'. International Journal of Cast Metals Research, 28 (4). pp. 242 - 247. ISSN: 1364-0461

Pei, E., Shen, J. and Watling, J. (2015) 'Direct 3D printing of polymers onto textiles: Experimental studies and applications'. Rapid Prototyping Journal, 21 (5). pp. 556 - 571. ISSN: 1355-2546 Open Access Link

Pei, E. (2015) 'Entry-level additive manufacturing: the next frontier'. Rapid Prototyping Journal, 21 (5). ISSN: 1355-2546 Open Access Link

Langari, B., Stonham, TJ. and Mousavi, A. (2015) 'Image Loss Concealment Using Edge-Guided Interpolation and Multi-scale Transformation'.IEEE Signal Processing & SP Education 2015. USA. 12 - 12 August. IEEE. pp. 391 - 396.

Li, W-F., Fang, C-M., Dijkstra, M. and van Huis, MA. (2015) 'The role of point defects in PbS, PbSe and PbTe: a first principles study'. Journal of Physics: Condensed Matter, 27 (35). pp. 1 - 14. ISSN: 0953-8984 Open Access Link

Zhou, L. and Lu, KJ. (2015) 'An Approach for Overlapping and Hierarchical Community Detection in Social Networks Based on Coalition Formation Game Theory'. Expert Systems with Applications, 42 (24 (ABS3)). pp. 9634 - 9646. ISSN: 0957-4174 Open Access Link

Yang, H., Ji, S., Yang, W., Wang, Y. and Fan, Z. (2015) 'Effect of Mg level on the microstructure and mechanical properties of die-cast Al-Si-Cu alloys'. Materials Science and Engineering A, 642. pp. 340 - 350. ISSN: 0921-5093

Nadendla, H. (2015) 'AL-NB-B MASTER ALLOY FOR GRAIN REFINING'.

Shamass, R., Alfano, G. and Guarracino, F. (2015) 'An investigation into the plastic buckling paradox for circular cylindrical shells under non-proportional loading'. Thin Walled Structures, 95. pp. 347 - 362. ISSN: 0263-8231 Open Access Link

Li, J., Zhou, L. and Huang, Y. (2015) 'Microstructures and corrosion behaviour of an Mg-3Zn-0.5Zr/5HA composite prepared by casting and plastic deformation'. European Cells and Materials, 30 (Suppl.3). pp. 10 - 10. ISSN: 1473-2262

da Silva, M., Rebolledo, L., Pabel, T., Petkov, T., Planta, X., Tort, J. and Eskin, D. et al. (2015) 'Evaluation of the Effect of Ultrasonic Degassing on Components Produced by Low Pressure Die Casting'. International Journal of Cast Metals Research, 28 (4). pp. 193 - 200. ISSN: 1743-1336 Open Access Link

Ji, SX., Yan, F. and Fan, ZY. (2015) 'Casting development with a high strength aluminium alloy'. Materials Science Forum, 828-829. pp. 9 - 14. ISSN: 0255-5476 Open Access Link

Sheng, B., Zhou, C., Hepburn, DM., Dong, X., Peers, G., Zhou, W. and Tang, Z. et al. (2015) 'A novel on-line cable pd localisation method based on cable transfer function and detected pd pulse rise-time'. IEEE Transactions on Dielectrics and Electrical Insulation, 22 (4). pp. 2087 - 2096. ISSN: 1070-9878

Anguilano, L. and Claughton, P. (2015) 'Silver in Queensland: The Problem of Ore Processing.'. Mining History, 19 (3). pp. 31 - 42. ISSN: 1366-2511

Eskin, D., Al-Helal, K. and Tzanakis, I. (2015) 'Application of a plate sonotrode to ultrasonic degassing of aluminum melt: acoustic measurements and feasibility study'. Journal of Materials Processing Technology, 222. pp. 148 - 154. ISSN: 1873-4774 Open Access Link

Huang, Y. and Fan, ZY. (2015) 'Microstructure and Texture Development during Melt Conditioned Twin Roll Casting and Downstream Processing in an AZ31 Magnesium Alloy'. Materials Science Forum, 828-829. pp. 87 - 92. ISSN: 0255-5476

Bolzoni, L. and Hari Babu, N. (2015) 'Refinement of the grain size of the LM25 Alloy (A356) by 96Al-2Nb-2B Master Alloy'. Journal of Materials Processing Technology, 222. pp. 219 - 223. ISSN: 1873-4774 Open Access Link

Mi, J. and Eskin, D. (2015) 'Foreword: Advances in Solidification of Metallic Alloys Under External Fields'. Springer Science and Business Media LLC. pp. 2850. ISSN: 1073-5623

Zhou, X. and Li, Z. (2015) 'Manufacturing Cement-based Materials and Building Products via Extrusion: from Laboratory to Factory'. Proceedings of Institution of Civil Engineers - Civil Engineering, 168 (6). pp. 11 - 16. ISSN: 0965-089X Open Access Link

Emili, S., Ceschin, F. and Harrison, D. (2015) 'Product-Service Systems applied to Distributed Renewable Energy: A classification system and a strategic design tool'.Kampala International Design Conference (KIDEC 2015). Kampala, Uganda. 21 - 24 July. Elsevier BV. pp. 71 - 98. ISSN: 0973-0826

Vezzoli, C., Ceschin, F., Osanjo, L., M'Rithaa, MK., Moalosi, R., Nakazibwe, V. and Diehl, JC. et al. (2015) 'An African-European network of design universities fostering the goal of sustainable energy for all'.Kampala International Design Conference (KIDEC 2015). Kampala, Uganda. 21 - 24 July.Open Access Link

Legg, M., Yuecel, MK., de Carellan, IG., Kappatos, V., Selcuk, C. and Gan, TH. (2015) 'Acoustic methods for biofouling control: A review'. OCEAN ENGINEERING, 103. pp. 237 - 247. ISSN: 0029-8018

Mikhailov, SE. and Portillo, CF. (2015) 'A New Family of Boundary-Domain Integral Equations for a Mixed Elliptic BVP with Variable Coefficient'.Tenth UK Conference on Boundary Integral Methods. University of Brighton, UK. 13 - 14 July. University of Brighton. pp. 76 - 84.Open Access Link

Mikhailov, S. and Portillo, CF. (2015) 'A New Family of Boundary-Domain Integral Equations for a Mixed Elliptic BVP with Variable Coefficient', in Harris, P. (ed.) Proceedings of the 10th UK Conference on Boundary Integral Methods, University of Brighton, UK, 13-14 July 2015. University of Brighton. pp. 76 - 84. ISBN 13: 978-1-910172-05-6. Open Access Link

Pichugin, A., Tyas, A., Gilbert, M. and He, L. (2015) 'Optimum structure for a uniform load over multiple spans'. Structural and Multidisciplinary Optimization: computer-aided optimal design of stressed solids and multidisciplinary systems, 52 (6). pp. 1041 - 1050. ISSN: 1615-1488 Open Access Link

Huang, Y. (2015) 'Grain refinement during ECAP in aluminium'.Inter Symposium on Recent Development in Severe Plastic Deformation. Shenyang, China. 10 - 10 July. [unpublished]

Buzolin, RH., Tolnai, D., Mendis, CL., Stark, A., Schell, N., Pinto, H., Kainer, KU. and Hort, N. et al. (2015) 'In situ synchrotron radiation diffraction study of the role of Gd, Nd on the elevated temperature compression behavior of ZK40'. Materials Science and Engineering: A, 640. pp. 129 - 136. ISSN: 0921-5093

Chong, TP., Vathylakis, A., McEwen, A., Kemsley, F., Muhammad, C. and Siddiqi, S. (2015) 'Aeroacoustic and Aerodynamic Performances of an Aerofoil Subjected to Sinusoidal Leading Edges'.21st AIAA/CEAS Aeroacoustic Conferences (Aviation 2015). Dallas, Texas, USA. 8 - 26 June. AIAA.Open Access Link

Tang, Q., Wang, X. and Yang, Q. (2015) 'Coupling analysis in the calibration process of electro-optical detection systems'.2015 IEEE International Instrumentation and Measurement Technology Conference (I2MTC). Pisa, ITALY. 6 - 14 May. IEEE. pp. 305 - 308. ISSN: 1091-5281

Albarella, M., Serpieri, R., Alfano, G. and Sacco, E. (2015) 'A 3D multiscale cohesive zone model for quasi-brittle materials accounting for friction, damage and interlocking'. European Journal of Computational Mechanics, 24 (4). pp. 144 - 170. ISSN: 2642-2085

Ren, YZ., Cheng, WM., Wu, X. and Wang, B. (2015) 'Torsional-Flexural Buckling of Unevenly Battened Columns under Eccentrical Compressive Loading'. Journal of Engineering Mechanics, 142 (1). pp. 04015066 - 04015066. ISSN: 0733-9399 Open Access Link

Tsimiklis, P., Ceschin, F., Green, S., Qin, SF., Song, J., Baurley, S., Rodden, T. and Makatsoris, C. et al. (2015) 'A Consumer-Centric Open Innovation Framework for Food and Packaging Manufacturing'. International Journal of Knowledge and Systems Science, 6 (3). pp. 52 - 69. ISSN: 1947-8208 Open Access Link

Huang, Y. and Fan, Z. (2015) 'Microstructure and texture development during melt conditioned twin roll casting and downstream processing in an AZ31 magnesium alloy'.7th Light Metal Technology Conference 2015. Port Elizabeth, South Africa. 1 - 29 July.

Shi, LL., Huang, Y., Yang, L., Feyerabend, F., Mendis, C., Willumeit, R., Ulrich Kainer, K. and Hort, N. et al. (2015) 'Mechanical properties and corrosion behavior of Mg-Gd-Ca-Zr alloys for medical applications'. Journal of the Mechanical Behavior of Biomedical Materials, 47. pp. 38 - 48. ISSN: 1751-6161

Jaff, T. and Ivanov, A. (2015) 'Manufacturing Lead-Time Reduction and Knowledge Sharing in the Manufacturing Sector'. The Journal of Innovation Impact, 8 (2). pp. 618 - 629.Open Access Link

De Coster, R. and Albesher, A. (2015) 'The development of mobile service applications for consumers and intelligent networks', in Information Resources Management Association. (ed.) Economics: Concepts, Methodologies, Tools, and Applications. Hershey, PA : IGI Global. , 1-3. pp. 344 - 360. ISBN 10: 1466684682. ISBN 13: 9781466684683.

Maghooa, F., Stilli, A., Noh, Y., Althoefer, K. and Wurdemann, HA. (2015) 'Tendon and pressure actuation for a bio-inspired manipulator based on an antagonistic principle'.2015 IEEE International Conference on Robotics and Automation (ICRA). Seattle, WA. 29 - 30 May. IEEE. pp. 2556 - 2561. ISSN: 1050-4729

Fang, C., Van Blaaderen, A. and Van Huis, MA. (2015) 'Two-Dimensional Hydrous Silica: Nanosheets and Nanotubes Predicted from First-Principles Simulations'. Journal of Physical Chemistry C, 119 (25). pp. 14343 - 14350. ISSN: 1932-7447

Gao, S., Cheng, K., Chen, S., Ding, H. and Fu, H. (2015) 'CFD based investigation on influence of orifice chamber shapes for the design of aerostatic thrust bearings at ultra-high speed spindles'. Tribology International, 92. pp. 211 - 221. ISSN: 0301-679X

Peng, T. and Chang, I. (2015) 'Uniformly dispersion of carbon nanotube in aluminum powders by wet shake-mixing approach'. Powder Technology, 284. pp. 32 - 39. ISSN: 0032-5910

Haghayeghi, R., Ezzatneshan, E. and Bahai, H. (2015) 'Experimental-numerical study of AA5754 microstructural evolution under electromagnetic ultrasonic merged fields'. Journal of Materials Processing Technology, 225. pp. 103 - 109. ISSN: 0924-0136

Vezzoli, C., Ceschin, F., Diehl, JC. and Kohtala, C. (2015) 'New design challenges to widely implement 'Sustainable Product-Service Systems''. Journal of Cleaner Production, 97. pp. 1 - 12. ISSN: 0959-6526 Open Access Link

Vezzoli, C., Ceschin, F. and Diehl, JC. (2015) 'Sustainable Product-Service System Design applied to Distributed Renewable Energy fostering the goal of sustainable energy for all'. Journal of Cleaner Production, 97. pp. 134 - 136. ISSN: 0959-6526 Open Access Link

Habibi, H., Edwards, G., Cheng, L., Zheng, H., Marks, A., Kappatos, V., Selcuk, C. and Gan, TH. et al. (2015) 'Developing a Novel Ice Protection System for Wind Turbine Blades Using Vibrations of Both Short and Long Wavelengths'. SAE Technical Papers, 2015-June (June). ISSN: 0148-7191

Ji, S., Yang, W. and Gao, F. (2015) 'Formation and sedimentation of Fe-rich intermetallics in Al−Si−Cu−Fe alloy'. Trans. Nonferrous Met. Soc. China, 25 (5). pp. 1704 - 1714. ISSN: 1003-6326 Open Access Link

Dehouche, Z., Tahhan, A., Fern, G R. and Haverkamp, E. (2015) 'Photovoltaic cells energy performance enhancement with down-converting photoluminescence phosphors'. International Journal of Energy Research, 39 (12). pp. 1616 - 1622. ISSN: 1099-114X Open Access Link

Hintzsche, LE., Fang, CM., Marsman, M., Lamers, MWPE., Weeber, AW. and Kresse, G. (2015) 'Formation of a positive fixed charge at c-Si (111)/a-Si3 N3.5: H interfaces'. Physical Review Applied, 3 (6). ISSN: 2331-7019

Bolzoni, L., Nowak, M. and Hari Babu, N. (2015) 'On the effect of Nb-based compounds on the microstructure of Al-12Si alloy'. Materials Chemistry and Physics, 162. pp. 340 - 345. ISSN: 0254-0584 Open Access Link

Rahmati, MT., Alfano, G. and Bahai, H. (2015) 'Small-scale fe modelling for the analysis of flexible risers'.ASME 2015 34th International Conference on Ocean, Offshore and Arctic Engineering. St. John’s, Newfoundland, Canada. 5 - 5 June. American Society of Mechanical Engineers.

Silver, J., Harris, P., Fern, G., Perrie, W. and Jin, Y. (2015) 'High Resolution Laser Etched Circuitry for ACEL Lamps'.Display Week 2015. San Jose. 3 - 5 June. Wiley. pp. 378 - 381. ISSN: 2154-6738

Bhagurkar, AG., Hari Babu, N., Dennis, AR., Durrell, JH. and Cardwell, DA. (2015) 'Characterization of bulk MgB2 synthesized by infiltration and growth'. IEEE Transactions on Applied Superconductivity, 25 (3). pp. 1 - 4. ISSN: 1051-8223 Open Access Link