Lim, Y., Nickpour, F. and Giacomin, J. (2016) 'Beyond accessible mobility: Insights into psychosocial inclusivity dimensions in personal transport'. Studies in Health Technology and Informatics, 229. pp. 571 - 581. ISSN: 0926-9630 Open Access Link

Kostan, M., Mohimi, A., Nageswaran, C., Dhutti, A., Gan, T-H., Wrobel, L. and Selcuk, C. et al. (2016) 'High temperature gallium orthophosphate transducers for NDT'.30th Eurosensors Conference. Budapest, HUNGARY. 1 - 7 September. Elsevier BV. pp. 987 - 990. ISSN: 1877-7058 Open Access Link

Lebon, GSB., Tzanakis, I., Pericleous, K. and Eskin, D. (2016) 'A high-order acoustic cavitation model for the treatment of a moving liquid metal volume'. Springer International Publishing. pp. 135 - 142. ISSN: 2367-1181

Tzanakis, I., Lebon, GSB., Eskin, DG. and Pericleous, K. (2016) 'Optimization of the ultrasonic processing in a melt flow'. TMS Light Metals. pp. 833 - 836. ISSN: 0147-0809

Nowak, M. and Nadendla, HB. (2016) 'Grain refiner for aluminium-silicon sand casting aloys', inLight Metals 2012. Springer International Publishing. pp. 349 - 353. ISBN 13: 9783319485706.

Gustafson-Pearce, O. and Grant, S. (2016) 'Supply chain knowledge networking using a 3D virtual world environment'. Proceedings of the European Conference on IS Management and Evaluation, ECIME. pp. 68 - 75. ISSN: 2048-8912

Grant, SB. (2016) 'Barriers and enablers to supply chain knowledge sharing using social media platform'. Proceedings of the European Conference on IS Management and Evaluation, ECIME. pp. 59 - 67. ISSN: 2048-8912

Zhang, L., Eskin, DG., Miroux, A. and Katgerman, L. (2016) 'Formation of microstructure in Al-Si alloys under ultrasonic melt treatment'. Springer International Publishing. pp. 999 - 1004.

Pour, ANR. and Cheng, K. (2016) 'Development of a simulation-based approach to smart management of energy consumption in buildings and their implementation'. IOS Press. pp. 357 - 362. ISSN: 2352-751X

Shamass, R., Alfano, G. and Guarracino, F. (2016) 'On the elasto-plastic stability analysis of circular cylindrical shells'. Proceedings of the International Colloquium on Stability and Ductility of Steel Structures, SDSS 2016. pp. 639 - 646.

Ibrahim, R., Rafai, NH., Rahim, EA., Cheng, K. and Ding, H. (2016) 'A performance of 2 dimensional ultrasonic vibration assisted milling in cutting force reduction, on aluminium AL6061'. ARPN Journal of Engineering and Applied Sciences, 11 (18). pp. 11124 - 11128.

Patel, JB., Lloyd, P., Peng, G. and Fan, Z. (2016) 'Development of the new high shear technology for continuous processing of Mg-alloys for ingot casting'.Magnesium Technology Symposium held during the 145th TMS Annual Meeting and Exhibition. Nashville, TN. 1 - 18 February. Wiley. pp. 29 - 33. ISSN: 1545-4150

Alsubaie, B., Yang, Q. and Au, J. (2016) 'Development of the mathematical model to optimise preventive maintenance activities for service organisations'.10th World Congress on Engineering Asset Management (WCEAM). Tampere, FINLAND. 1 - 30 September. Springer International Publishing. pp. 51 - 58. ISSN: 2195-4356

Nadendla, HB., Nowak, M. and Bolzoni, L. (2016) 'Grain refiner for Al-Si alloys'. Springer International Publishing. pp. 1009 - 1012. ISSN: 2367-1181

Algassem, F., Yang, Q. and Au, Y. (2016) 'Reducing the delivery time in food distribution SMEs using a multi-agent system'.10th World Congress on Engineering Asset Management (WCEAM). Tampere, FINLAND. 1 - 30 September. Springer International Publishing. pp. 29 - 40. ISSN: 2195-4356

Zhang, C., Jiang, P., Cheng, K., Xu, XW. and Ma, Y. (2016) 'Configuration Design of the Add-on Cyber-physical System with CNC Machine Tools and its Application Perspectives'. Elsevier BV. pp. 360 - 365. ISSN: 2212-8271

Rahmati, MT., Alfano, G. and Bahai, H. (2016) 'Periodic and fixed boundary conditions for multi-scale finite element analysis of flexible risers'.ASME 2016 35th International Conference on Ocean, Offshore and Arctic Engineering. Busan, SOUTH KOREA. 1 - 24 June. American Society of Mechanical Engineers.

Rees, DWA. (2016) 'Mechanics of Solids and Structures'. World Scientific Publishing. ISSN 13: 978-1-78326-396-7

Peces, SM., Livadas, M., Selcuk, C., Gan, TH. and Mares, C. (2016) 'Wave scattering analysis in an ACSR cable using piezoelectric transducers'. 8th European Workshop on Structural Health Monitoring, EWSHM 2016. pp. 1133 - 1142.

Zheng, H., Gan, TH., Selcuk, C. and Cheilakou, E. (2016) 'Comparison study on migration methods of GPR scanning images for concrete inspection'. 8th European Workshop on Structural Health Monitoring, EWSHM 2016. pp. 1902 - 1911.

Fang, F., Cheng, K., Ding, H., Chen, S. and Zhao, L. (2016) 'Sustainable design and analysis of cnc machine tools: Sustainable design index based approach and its application perspectives'. ASME 2016 11th International Manufacturing Science and Engineering Conference, MSEC 2016.

Romero, A., Lage, Y., Soua, S., Wang, B. and Gan, TH. (2016) 'Vestas V90-3MW Wind Turbine Gearbox Health Assessment Using a Vibration-Based Condition Monitoring System'. Shock and Vibration, 2016. pp. 1 - 18. ISSN: 1070-9622 Open Access Link

Niu, Z. and Cheng, K. (2016) 'Multiphysics based modelling and analysis of micro milling metal matrix composites (MMCs) against the effects of key process variables'. Proceedings of the 16th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2016.

Biedermann, T., Chong, TP. and Kameier, F. (2016) 'Statistical-Empirical Modelling of Aerofoil Noise Subjected to Leading Edge Serrations and Aerodynamic Identification of Noise Reduction Mechanisms'.22nd AIAA/CEAS Aeroacoustic Conference. Lyon, France. 1 - 1 June. American Institute of Aeronautics and Astronautics.Open Access Link

Fatah, OA., Lanigan, P., Aggoun, A. and Swash, MR. (2016) 'Digital Refocusing: All-in-Focus Image Rendering Based on Holoscopic 3D Camera'. Journal of Computer and Communications, 04 (06). pp. 24 - 35. ISSN: 2327-5219 Open Access Link

Ji, S., Yang, W., Gao, F., Watson, D. and Fan, Z. (2016) 'Effect of iron in Al-Mg-Si-Mn ductile diecast alloy'.Proceedings of the symposia sponsored by the TMS Aluminum Committee at the TMS 2013 Annual Meeting & Exhibition. San Antonio, TX, USA. 1 - 7 March. Springer International Publishing. pp. 317 - 322. ISSN: 2367-1181

Alamoud, AH., Baillot, E., Belabbas, C., Ardestani, HSS., Bahai, H., Baldit, A. and Chizari, M. et al. (2016) 'Dissect pituitary gland tumour using liquid jet: Experimental and numerical simulation'. Lecture Notes in Engineering and Computer Science. pp. 509 - 514. ISSN: 2078-0958

D’Elia, F., Tolnai, D., Mendis, CL. and Hort, N. (2016) 'Hot Tearing Susceptibility of Mg-5Nd-xZn Alloys', inMagnesium Technology 2016. Springer International Publishing. pp. 129 - 134. ISBN 13: 9783319486208.

Zhang, R., Xu, Y., Harrison, D., Fyson, J. and Southee, D. (2016) 'Experimental Design to Optimise Electrical Performance of Strip Supercapacitors'. International Journal of Electrochemical Science, 11 (1). pp. 675 - 684. ISSN: 1452-3981

Klösch, G., McKay, BJ. and Schumacher, P. (2016) 'PRELIMINARY INVESTIGATION ON THE GRAIN REFINEMENT BEHAVIOR OF ZrB2 PARTICLES IN Mg-Al ALLOYS', inEssential Readings in Magnesium Technology. Springer International Publishing. pp. 255 - 261. ISBN 13: 9783319485881.

Li, WF., Fang, C. and Van Huis, MA. (2016) 'Strong spin-orbit splitting and magnetism of point defect states in monolayer WS2'. Physical Review B, 94 (19). ISSN: 2469-9950

Zhao, L., Cheng, K., Chen, S-J. and Ding, H. (2016) 'AN INVESTIGATION ON SIMULATION AND IDENTIFICATION OF DIFFRACTED MOIRE PATTERNS OF OPTICAL ENCODERS WITH APPLICATION TO MACHINE TOOLS'. MATERIAL ENGINEERING AND MECHANICAL ENGINEERING (MEME2015). pp. 988 - 998.

Pei, E. (2016) 'Multi tasking'. New Design. pp. 57 - 58. ISSN: 1472-2674

Chong, TP., Vathylakis, A., McEwen, A., Kemsley, F., Muhammad, C. and Siddiqi, S. (2016) 'Aeroacoustic and aerodynamic performances of an aerofoil subjected to sinusoidal leading edges'.21st AIAA/CEAS Aeroacoustics Conference. American Institute of Aeronautics and Astronautics.

Alba-Baena, N. and Eskin, D. (2016) 'Kinetics of ultrasonic degassing of aluminum alloys'. Springer International Publishing. pp. 957 - 962. ISSN: 2367-1181

Schmid-Fetzer, R., Kozlov, A., Wiese, B., Mendis, CL., Tolnai, D., Kainer, KU. and Hort, N. et al. (2016) 'Thermodynamic Description of Reactions between Mg and CaO', inMagnesium Technology 2016. Springer International Publishing. pp. 67 - 72. ISBN 13: 9783319486208.

Qin, S. and Cheng, K. (2016) 'Special issue on future digital design and manufacturing: Embracing industry 4.0 and beyond'. Chinese Journal of Mechanical Engineering (English Edition), 29 (6). pp. 1045. ISSN: 1000-9345

Ji, S., Yang, H., Watson, D. and Fan, Z. (2016) 'Weibull analysis for the repeatibility of die castings made by an Al-Mg-Si-Mn ALLOY'.Symposium on Light Metals held during 145th The-Minerals-Metals-and-Materials-Society Annual Meeting and Exhibition. Nashville, TN. 1 - 18 February. JOHN WILEY & SONS INC. pp. 681 - 685. ISSN: 0147-0809

Wang, Y., Zhou, L. and Fan, Z. (2016) 'Mechanism of zirconium poisioning effect on TiB2 inoculation in aluminium alloys'. TMS Light Metals. pp. 725 - 729. ISSN: 0147-0809

Kawther, AH., Stone, I. and Fan, Z. (2016) 'Refinement of primary silicon crystals by novel Al-ZnS Master alloy in solidification of hypereutectic Al-Si Alloys'. TMS Light Metals. pp. 271 - 273. ISSN: 0147-0809

Goshvarpour, A., Abbasi, A., Goshvarpour, A. and Daneshvar, S. (2016) 'Fusion framework for emotional electrocardiogram and galvanic skin response recognition: Applying wavelet transform'. Iranian Journal of Medical Physics, 13 (3). pp. 163 - 173.

Bhaskaran, S., Lu, K. and Al Aali, M. (2016) 'A data mining approach for investigating students’ completion rates'. CRC Press. pp. 105 - 116.

Silver, J., Harris, P., Fern, G., Kosier, E., Kay, M. and Mitchell, J. (2016) 'Plastic packaging recycling using intelligent separation technologies for materials (PRISM)'. 23rd International Display Workshops in conjunction with Asia Display, IDW/AD 2016. pp. 1888 - 1891.

Said, M., Kamalarajah, R., Cashell, KA. and Chizari, M. (2016) 'Behaviour of columns made from high strength steel'. Lecture Notes in Engineering and Computer Science. pp. 1184 - 1187. ISSN: 2078-0958

Kastiukas, G., Zhou, X., Castro-Gomes, J., Huang, S. and Saafi, M. (2015) 'Effects of Lactic and Citric Acid on Early-age Engineering Properties of Portland/Calcium Aluminate Blended Cements'. Construction and Building Materials, 101 (Part 1). pp. 389 - 395. ISSN: 0950-0618

Nyamu, J., De Coster, R. and Taib, SM. (2015) 'An empirical study of collaborative innovation as a facilitator to telemedicine adoption in developing countries'.International Conference on Information Society (i-Society 2015). London. 28 - 11 October. IEEE. pp. 33 - 38.

Rasidi, II., Rafai, NH., Rahim, EA., Kamaruddin, SA., Ding, H. and Cheng, K. (2015) 'An investigation of cutting mechanics in 2 dimensional Ultrasonic Vibration assisted milling toward chip thickness and chip formation'. IOP Publishing. pp. 012057 - 012057. ISSN: 1757-8981

Ji, S., Fan, Z. and Bevis, M. (Accepted) 'Method and apparatus for producing semisolid metal slurries and shaped components'.

Elishakoff, I., Kaplunov, J. and Nolde, E. (2015) 'Celebrating the Centenary of Timoshenko’s Study of Effects of Shear Deformation and Rotary Inertia'. Applied Mechanics Reviews, 67 (6). ISSN: 1088-8535

Fern, G., Silver, J., Ireland, T., Howkins, A., Hobson, PH. and Coe-Sullivan, S. (2015) 'Invited Talk: Electron Microscopy of Quantum Dots for Display Applications'.International Displays Workshop. Otsu, Japan. 11 - 11 December. ISSN: 2189-8391 Open Access Link

Fern, G., Silver, J., Dhillon, R., Engelsen, DD., Ireland, T., Hudry, D. and Diskerson, JH. et al. (2015) 'Invited: By Understanding How Light Emission Depends on Size, Morphology and Phase in Inorganic Phosphor Materials, Can We Deduce Properties to Design Efficient Nanostructures for Tomorrows Industrial Needs'.International Displays Workshop. Otsu, Japan. 11 - 11 December. ISSN: 2189-8391 Open Access Link