Macredie, RD., Paul, RJ. and Mitra, G. (1996) 'Modelling for Applications System Design'. Journal of Intelligent Systems, 6 (1). pp. 1 - 4. ISSN: 0334-1860

Fan, Z. (1996) 'A microstnietural approach to the effective transport properties of multiphase composites'. Philosophical Magazine A: Physics of Condensed Matter, Structure, Defects and Mechanical Properties, 73 (6). pp. 1663 - 1684. ISSN: 0141-8610

Fan, Z. and Boccaccini, AR. (1996) 'A new approach to the effective viscosity of suspensions'. Journal of Materials Science, 31 (10). pp. 2515 - 2521. ISSN: 0022-2461

Fan, Z. and Miodownik, AP. (1996) 'Microstructural evolution in rapidly solidified Ti-7.5 Mn-0.5 B alloy'. Acta Materialia, 44 (1). pp. 93 - 110. ISSN: 1359-6454

Campbell, J. and Vignjevic, R. (1996) 'Lagrangian Hydrocode Modelling of Hypervelocity Impact on Spacecraft'.The Third International Conference on Computational Structures Technology. Civil-Comp Press. pp. 95 - 101. ISSN: 1759-3433

Chang, ITH., Niu, F., Slimovici, D., Wildig, C., Leigh, PA., Dobson, PJ. and Cantor, B. et al. (1996) 'Manufacture and characterization of nanocomposite thin films of Si-SiO2 and Ag-Si'. Materials Science Forum, 225-227 (PART 1). pp. 175 - 178. ISSN: 0255-5476

Chang, ITH., Svec, P., Gogebakan, M. and Cantor, B. (1996) 'Rapidly solidified Al85Ni15-xYx(x=5,8,10) alloys'. Materials Science Forum, 225-227 (PART 1). pp. 335 - 340. ISSN: 0255-5476

Earnshaw, R., Macredie, R. and Vince, J. (1995) 'Editorial'. Virtual Reality, 1 (2). pp. I - I. ISSN: 1359-4338

Thomas, PJ., Meech, JF. and Macredie, RD. (1995) 'Personal information appliances'.6th International Conference on Human-Computer Interaction (HCI International 95). TOKYO, JAPAN. 1 - 14 July. Elsevier. pp. 945 - 950. ISSN: 0921-2647

Chang, ITH., Balcers, O. and Cantor, B. (1995) 'Effect of added Mo on the crystallization behaviour of rapidly solidified Fe70Cr20B10 alloys'. International journal of rapid solidification, 9 (1). pp. 63 - 73. ISSN: 0265-0916

Mares, C. and Surace, C. (1995) 'Finite Element Updating Using a Genetic Algorithm'.2nd International Conference on Structural Dynamics Modelling, Test, Analysis and Correlation, NAFEMS/DTA. Cumbria, UK.

Mikhailov, SE. (1995) 'A FUNCTIONAL APPROACH TO NON-LOCAL STRENGTH CONDITIONS AND FRACTURE CRITERIA - II. DISCRETE FRACTURE'. ENGINEERING FRACTURE MECHANICS, 52 (4). pp. 745 - 754. ISSN: 0013-7944

Mikhailov, SE. (1995) 'A FUNCTIONAL APPROACH TO NON-LOCAL STRENGTH CONDITIONS AND FRACTURE CRITERIA - I. BODY AND POINT FRACTURE'. ENGINEERING FRACTURE MECHANICS, 52 (4). pp. 731 - 743. ISSN: 0013-7944

Harrison, D., Billet, E. and Billingsley, J. (1995) 'Novel circuit fabrication techniques for reduced environmental impact'.IEE/IEEE International Conference on Clean Electronics. Edinburgh, UK. 9 - 11 October. IEEE. pp. 174 - 175. ISSN: 0537-9989 Open Access Link

Kalganova, T. and Zaitseva, EN. (1995) 'Using of the Digital Orthogonal Transformations for Solving of the Integer Programming Problems. (in Russian)'. Zielona Gora, Poland. 1 Proc. of the 17th International Symposium of Students and Young Scientists. pp. 167 - 171.

Kalganova, T., Zaitseva, E., Kochergov, E. and Bondar, I. (1995) 'Synthesis of Two Dimensional Logic Polynomial Forms of Multiple-Valued Functions of Logic Algebra.'. Szczecin, Poland. 1 Proc. of the 2nd Int’l Conf. on Applications of Computer Systems. pp. 131 - 138.

Ghobadian, A., Gallear, D., Liu, J. and Bamford, D. (1995) 'TQM at Betts Plastics'.11th National Conference on Manufacturing Research. De Montfort University, Leicester, UK. 12 - 14 September. TAYLOR & FRANCIS LTD. pp. 529 - 533.

Mikhailov, SE. (1995) 'To singular stress asymptotics in bonded hereditarily-elastic aging bodies'.1st International Conference on Mechanics of Time Dependent Materials. LJUBLJANA, SLOVENIA. 11 - 13 September. SOC EXPERIMENTAL MECHANICS INC. pp. 330 - 335.

Kalganova, T., Kochergov, EG., Ryzhkovich, LR. and Cheushev, VA. (1995) 'The Dictionary Support Algorithm of the Text Recognition Based on Multivariant Classification. (in Russian)'. Minsk, Republic of Belarus. Proc. of the 3rd Int. Conf. on Pattern Recognition and Information Processing. pp. 11 - 16.

Kalganova, T., Kochergov, E., Sanko, A. and Zaitseva, E. (1995) 'Genetic Algorithm to Optimize Analytical Description of Multiple-Valued Functions.'. Minsk, Republic of Belarus. Proc. of the Int’l Conf. on Computer-Aided Design of Discrete Devices.. pp. 115 - 122.

Kaplunov, YD. and Nol'de, EV. (1995) 'The quasi-front in the problem of action of an instantaneous concentrated pulse on the edge of a conical shell'. Prikladnaya Matematika i Mekhanika, 59 (5). pp. 803 - 811. ISSN: 0032-8235

Ji, S. (Accepted) 'Punching and glazing machine for semi-finished pottery'.

Yang, Q., Butler, C. and Baird, P. (1995) 'Probe error modelling using artificial neural networks'.ISMQC'95 & CIMI'95. Zaragoza, Spain. Proceedings of International IMEKO Conference ISMQC 95/CIMI 95. pp. 406 - 413.

FANG, CM., MEETSMA, A. and WIEGERS, GA. (1995) 'ChemInform Abstract: Crystal Structure of Erbium Sesquiselenide, Er2Se3.'. ChemInform, 26 (29). ISSN: 0931-7597

Ql, K. and Huang, R. (1995) 'Rheological Behavior of Polyethersulfone (PES)'. International Journal of Polymeric Materials and Polymeric Biomaterials, 29 (3-4). pp. 157 - 164. ISSN: 0091-4037

Macredie, R. (1995) 'Editorial'. Virtual Reality, 1 (1). ISSN: 1359-4338

Ji, S. (Accepted) 'A height control valve for lost foam process'.Open Access Link

Ji, S., Gao, J. and Huang, C. (1995) 'Drilling and glazing machine for porcelain products'.

Fleuriot, C., Lees, DY., MacRedie, RD., Thomas, PJ. and Meech, JF. (1995) 'INTERFACE ENGINEERING IN AN OFFICE INFORMATION APPLIANCE'.Conference companion. ACM Press. pp. 242 - 243.

Bonser, RHC. (1995) 'Melanin and the abrasion resistance of feathers'. Condor, 97 (2). pp. 590 - 591. ISSN: 0010-5422

Gao, J., Ye, S., Ji, S. and Zhang, J. (1995) 'Centrifugal coating spraying device for casting'.

Bonser, RHC. and Purslow, PP. (1995) 'The Youngs-modulus of feather keratin'. Journal of Experimental Biology, 198 (4). pp. 1029 - 1033. ISSN: 0022-0949

Zhang, J., Ji, S. and Yang, G. (1995) 'Charing pail'.

Fan, Z., Chandrasekaran, L., Ward-Close, CM. and Miodownik, AP. (1995) 'The effect of pre-consolidation heat treatment on TiB morphology and mechanical properties of rapidly solidified Ti-6Al-4V-XB alloys'. Scripta Metallurgica et Materiala, 32 (6). pp. 833 - 838. ISSN: 0956-716X

Gopalan, R., Roy, T., Rajasekharan, T., Rangarajan, G. and Hari Babu, N. (1995) 'Microstructural and magnetisation study in melt-grown YBaCuO samples'. Physica C: Superconductivity and its applications, 244 (1-2). pp. 106 - 114. ISSN: 0921-4534

Fang, CM., Meetsma, A. and Wiegers, GA. (1995) 'Crystal structure of erbium sesquiselenide, Er2Se3'. Journal of Alloys and Compounds, 218 (2). pp. 224 - 227. ISSN: 0925-8388

Harrison, D. and Meng, T. (1995) 'A conceptual quality performance model: Quality world'. Technical Journal of the Institute of Quality Assurance. pp. 44 - 47.

Gao, J., Ji, S., Zhang, J. and Yang, G. (1995) 'Development of a core-making machine with two working stations (in Chinese)'. China Foundry Machinery & Technology, 1995 (01). pp. 51 - 54. ISSN: 1006-9658

Reid, SR., Wang, B. and Yu, TX. (1995) 'Yield mechanisms of a bent cantilever beam subjected to a suddenly applied constant out-of-plane tip force'. International Journal of Impact Engineering, 16 (1). pp. 49 - 73. ISSN: 0734-743X

Reid, SR., Wang, B. and Hua, YL. (1995) 'Triple plastic hinge mechanism for a bent cantilever beam subjected to an out-of-plane tip force pulse of finite duration'. International Journal of Impact Engineering, 16 (1). pp. 75 - 93. ISSN: 0734-743X

Fan, Z. (1995) 'The grain size dependence of ductile fracture toughness of polycrystalline metals and alloys'. Materials Science and Engineering A, 191 (1-2). pp. 73 - 83. ISSN: 0921-5093

Ji, S., Wan, L., Zhang, J. and Yang, G. (1995) 'A Microcomputer Control System for the Moulding Machine in Full Mould Process (in Chinese)'. Journal of Huazhong University of Science and Technology(Natural Science Edition), 23 (1995) (1). pp. 72 - 76. ISSN: 1671-4512

Ji, S., Zhang, J., Wan, L. and Zhang, Y. (1995) 'The design of 3-D vibrating compact table for the EPC process with dry sands (in Chinese)'. Journal of Huazhong University of Science and Technology(Natural Science Edition), 1995 (vol. 23, No 1). pp. 68 - 71. ISSN: 1671-4512

Ji, S., Wei, H., Zhang, J. and Yang, G. (1995) 'A CAD System for Patterns Design in Green Sand Technology (in Chinese)'. Journal of Huazhong University of Science and Technology(Natural Science Edition), 1995 (01). pp. 109 - 112. ISSN: 1671-4512

Ling, H., Dai, X., Wang, W. and JI, SHOUXUN. (1995) 'Study on the Technology of Anti-adhering Mould in No-bake Process (in Chinese)'. Rejiagong Gongyi/Hot Working Technology, 1995 (01). pp. 44 - 49. ISSN: 1001-3814

Ghobadian, A., Liu, J., Gallear, D., Woo, H. and Viney, H. (1995) 'Practical considerations for the implementation of Total Quality Management'. Kuala Lumpar. 19 - 21 January. Proceedings of International Management Accounting Conference.

Ji, S. (Accepted) 'Compact punching die for highway shield plate'.Open Access Link

Rees, DWA. (1995) 'Tensile flow and instability in galvanized, rolled steel sheet'. The Journal of Strain Analysis for Engineering Design, 30 (4). pp. 305 - 315. ISSN: 0309-3247

Abrahams, ID. and Lawrie, JB. (1995) 'On the factorization of a class of Wiener-Hopf kernels'. IMA Journal of Applied Mathematics, 55 (1). pp. 35 - 47. ISSN: 0272-4960 Open Access Link

Rees, DWA. (1995) 'Instability limits to the forming of sheet metals'. Journal of Materials Processing Technology, 55 (3). pp. 146 - 153. ISSN: 0924-0136

Abrahams, ID. and Lawrie, JB. (1995) 'Travelling waves on a membrane: reflection and transmission at a corner of arbitrary angle. I'. Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, 451 (1943). pp. 657 - 683. ISSN: 1364-5021