IMM
Kogo, B., Wang, B., Wrobe, L. and Chizari, M. (2017) 'Thermal analysis of girth welded joints of dissimilar metals in clad pipes: Experimental and numerical analysis'. Proceedings of the International Offshore and Polar Engineering Conference. pp. 34 - 41. ISSN: 1098-6189
Vasilaki, V., Danishvar, M., Huang, Z., Mousavi, A. and Katsou, E. (2017)
'Application of event-based real-time analysis for long-term N
Kazi, TA., Stanton, NA. and Harrison, D. (2017) 'An Exploratory Study of the Interaction Between Drivers' Trust of Automatic Cruise Control and Reliability', inDriver Behaviour and Training. pp. 253 - 262.
Fern, GR., Harris, PG., Ireland, TG. and Silver, J. (2017) 'Sub-micrometre Phosphor Preparation for Next Generation Displays'. Wiley. pp. 1711 - 1714. ISSN: 0097-966X
Ibrahim, MR., Rahim, Z., Rahim, E., Tobi, L., Cheng, K. and Ding, H. (2017) 'An Experimental Investigation of Cutting Temperature and Tool Wear in 2 Dimensional Ultrasonic Vibrations Assisted Micro-Milling'. 2016 THE 3RD INTERNATIONAL CONFERENCE ON MECHATRONICS AND MECHANICAL ENGINEERING (ICMME 2016). ISSN: 2261-236X
Konstantinova, J., Cotugno, G., Stilli, A., Noh, Y. and Althoefer, K. (2017) 'Object Classification Using Hybrid Fiber Optical Force/Proximity Sensor'.16th IEEE SENSORS CONFERENCE. Glasgow, SCOTLAND. 1 - 1 November. IEEE. pp. 543 - 545. ISSN: 1930-0395
Metzler, CA., Mousavi, A. and Baraniuk, RG. (2017) 'Learned D-AMP: Principled! Neural network based compressive image recovery'. Advances in Neural Information Processing Systems. pp. 1773 - 1784. ISSN: 1049-5258
Tayebi Khosroshahi, H., Abedi, B., Daneshvar, S., Alizadeh, E., Khalilzadeh, M. and Abedi, Y. (2017) 'Cross-linked polyelectrolyte and its function in adsorption of fluid and excess nitrogen waste products: An experimental study on dialysate effluent fluid'. Iranian Journal of Kidney Diseases, 11 (4). pp. 294 - 302. ISSN: 1735-8582
Khosroshahi, HT., Abedi, B., Daneshvar, S., Sarbaz, Y. and Bavil, AS. (2017) 'Future of the renal biopsy: Time to change the conventional modality using nanotechnology'. International Journal of Biomedical Imaging, 2017. pp. 1 - 14. ISSN: 1687-4188
Fern, GR., Silver, J., Tarverdi, K., Ireland, TG., Meng, F. and Dehouche, Z. (2017) 'Development of nano-phosphors films for polymer protection and plant growth'. Proceedings of the International Display Workshops. pp. 1288 - 1291. ISSN: 1883-2490
Silver, J., Fern, GR., Harris, PG., Marsh, P. and Tarverdi, K. (2017) 'Plastic packaging recycling using intelligent separation technologies for materials (PRISM): The use of long-persistence phosphors'. Proceedings of the International Display Workshops. pp. 1295 - 1298. ISSN: 1883-2490
Serpieri, R., Alfano, G. and Sacco, E. (2017) 'Multiplane cohesive-zone models accounting for friction, finite dilation and asperity degradation under mixed-mode cyclic loading'. AIMETA 2017 - Proceedings of the 23rd Conference of the Italian Association of Theoretical and Applied Mechanics. pp. 1801 - 1810.
Dissanayake, M., Sattar, TP., Howlader, O., Pinson, I. and Gan, T-H. (2017) 'Tracked-Wheel Crawler Robot for Vertically Aligned Mooring Chain Climbing Design, simulation and validation of a climbing robot for mooring chains'.IEEE International Conference on Industrial and Information Systems (ICIIS). Univ Peradeniya,Fac Engn, Peradeniya, SRI LANKA. 1 - 16 December. IEEE. pp. 517 - 522. ISSN: 2164-7011
Lais, H., Lowe, PS., Kanfoud, J. and Gan, T-H. (2017) 'Advancements in Fouling Removal using High Power Ultrasonics for Industrial Applications'.IEEE International Conference on Industrial and Information Systems (ICIIS). Univ Peradeniya,Fac Engn, Peradeniya, SRI LANKA. 1 - 16 December. IEEE. pp. 141 - 146. ISSN: 2164-7011
Cheng, QL., Cheng, K., Zhou, YY. and Jiang, H. (2017) 'Design of a bespoke five-axis CNC machine tool for machining thin-walled cylindrical components with internal concave circular arc surfaces'. Laser Metrology and Machine Performance XII - 12th International Conference and Exhibition on Laser Metrology, Machine Tool, CMM and Robotic Performance, LAMDAMAP 2017. pp. 77 - 90.
Cheng, K., Shao, Y., Merlo, R. and Jadva, M. (2017) 'An investigation on the profile accuracy control in abrasive flow machining: CFD simulation and experiment case study'. Laser Metrology and Machine Performance XII - 12th International Conference and Exhibition on Laser Metrology, Machine Tool, CMM and Robotic Performance, LAMDAMAP 2017. pp. 185 - 194.
Wang, C., Cheng, K., Rakowski, R., Greenwood, D. and Wale, J. (2017) 'Development of a surface acoustic wave sensor based smart cutting tool with application to the fly-cutting process'. Laser Metrology and Machine Performance XII - 12th International Conference and Exhibition on Laser Metrology, Machine Tool, CMM and Robotic Performance, LAMDAMAP 2017. pp. 242 - 251.
Wang, Y., Peng, G. and Fan, Z. (2017) 'Grain refinement of Mg and its alloy by inoculation of in situ MgO particles'.Symposium on Magnesium Technology / In-Situ Methods for Unraveling Structure-Property Relationships in Light Metals Symposium held during the 146th TMS Annual Meeting and Exhibition. San Diego, CA. 1 - 2 March. Springer International Publishing. pp. 99 - 106. ISSN: 2367-1181
Zhu, L., Liu, Q., Kong, J., Chen, M. and Wang, B. (2017) 'Experimental study on dynamic response of pipes under lateral impact'. Proceedings of the International Offshore and Polar Engineering Conference. pp. 181 - 187. ISSN: 1098-6189
Zhang, R., Xu, Y., Harrison, D. and Fyson, J. (2016) 'A study of the electrochemical performance of strip supercapacitors under static and dynamic mechanical tests'. International Journal of Electrochemical Science, 12 (2). pp. 1463 - 1473. ISSN: 1452-3981 Open Access Link
De Coster, R., taib, S. and Nyamu, J. (2016) 'An Empirical Study on the Innovation Acceptance of Wearable Mobile Computing: Pervasive Computing Perspective'. International Journal of Chaotic Computing, 4 (2). pp. 96 - 102. ISSN: 2046-3359 Open Access Link
Bisani, S. and Choi, Y. (2016) 'Strategic design to foster City-Citizen Interactions'. Strategic Design Research Journal, 9 (3).Open Access Link
Dobrowolska, A., Dierre, B., Fang, CM., Hintzen, HT. and Dorenbos, P. (2016) 'Thermal quenching of Eu2+ emission in Ca- and Sr-Ga2S4 in relation with VRBE schemes'. Journal of Luminescence, 184. pp. 256 - 261. ISSN: 0022-2313 Open Access Link
Zhou, L., Gao, F., Peng, GS. and Alba-Baena, N. (2016) 'Effect of potent TiB2 addition levels and impurities on the grain refinement of Al'. Journal of Alloys and Compounds, 689. pp. 401 - 407. ISSN: 0925-8388
Zhang, Y., Ji, S., Scamans, G. and Fan, Z. (2016) 'Interfacial characterisation of overcasting a cast Al-Si-Mg (A356) alloy on a wrought Al-Mg-Si (AA6060) alloy'. Journal of Materials Processing Technology, 243 (May 2017). pp. 197 - 204. ISSN: 0924-0136 Open Access Link
Bolzoni, L., Xia, M. and Nadendla, H. (2016) 'Formation of equiaxed crystal structures in directionally solidified Al-Si alloys using Nb-based heterogeneous nuclei'. Scientific Reports, 6 (1). pp. 39554. ISSN: 2045-2322 Open Access Link
Yao, R., Paradowska, A., Eren, E. and Wang, B. (2016) 'Challenges of Measuring Residual Stresses in Large Girth Welded Pipe Spools by Neutron Diffraction'.International Conference of Residual Stresses 2016. Materials Research Forum LLC. pp. 575 - 580. ISSN: 2474-395X Open Access Link
Daudin, R., Terzi, S., Lhuissier, P., Tamayo, J., Scheel, M., Hari Babu, N., et al. (2016) 'Particle-induced morphological modification of Al alloy equiaxed dendrites revealed by sub-second in situ microtomography'. Acta Materialia, 125 (15 February 2017). pp. 303 - 310. ISSN: 1359-6454 Open Access Link
Wan Ahmad, WMNI., De Coster, R. and Wan Ahmad, M. (2016) 'Healthcare innovation and performance factors for telemedicine acceptance in Malaysia'.ISPIM Innovation Forum: Fostering Innovation Ecosystems. Toronto.Open Access Link
Dong, W., Wu, Z., Zhou, X. and Tan, Y. (2016) 'Experimental Studies on Void Detection in Concrete-filled Steel Tubes using Ultrasound'. Construction and Building Materials, 128. pp. 154 - 162. ISSN: 0950-0618 Open Access Link
Mousavi, A. and Siervo, HRA. (2016) 'Automatic translation of plant data into management performance metrics: a case for real-time and predictive production control'. International Journal of Production Research, 55 (17). pp. 4862 - 4877. ISSN: 0020-7543 Open Access Link
Grant, S. (2016) 'Classifying emerging knowledge sharing practices and some insights into antecedents to social networking: a case in insurance'. Journal of Knowledge Management, 20 (5). pp. 898 - 917. ISSN: 1367-3270 Open Access Link
Silver, J., Harris, P., Fern, G., Bonar, J., Valentine, G. and Gorton, S. (2016) 'Novel Approach to the Manufacture of MicroLED Colour Conversion Structures'.International Displays Workshop. Fukuoka, Japan. 8 - 9 December. 23rd International Display Workshops in conjunction with Asia Display, IDW/AD 2016. pp. 1867 - 1870.Open Access Link
Silver, J., Ireland, T., Fern, G. and Engelsen, D. (2016) 'Versatile Measuring Method of the Quantum Yield of Phosphor Systems with High and Low Photoluminescence'.23rd International Display Workshops in conjunction with Asia Display (IDW/AD'16). Fukuoka, Japan. 7 - 9 December. https://www.idw.or.jp/IDW16FP.pdf. pp. 1104 - 1107. ISSN: 1883-2490
Silver, J., Harris, P., Fern, G., Kosier, E., Kay, M. and Mitchell, J. (2016) 'Plastic Packaging Recycling Using Intelligent Separation Technologies for Materials'.International Displays Workshop. Fukuoka, Japan. 7 - 9 December. Annual Technical Conference - ANTEC, Conference Proceedings. pp. 500 - 506.Open Access Link
Lawrie, JB. and Afzal, M. (2016) 'Acoustic scattering in a waveguide with a height discontinuity bridged by a membrane: a tailored Galerkin approach'. Journal of Engineering Mathematics, 105 (1). pp. 99 - 115. ISSN: 1573-2703 Open Access Link
Pinatti, IM., Ireland, TG., Fern, GR., Rosa, ILV. and Silver, J. (2016)
'Low temperature micro Raman and laser induced upconversion and downconversion spectra of europium doped silver tungstate Ag
Lu, KJ. (2016) 'UNDERSTANDING AND PREDICTING ONLINE PURCHASE INTENTION: DEVELOPMENT OF A MODEL FOR COGNITIVEAFFECTIVE SHOPPER RESPONSES'. International Journal of Management and Applied Science, 2 (12). ISSN: 2394-7926 Open Access Link
Goshvarpour, A., Abbasi, A., Goshvarpour, A. and Daneshvar, S. (2016) 'A novel signal-based fusion approach for accurate music emotion recognition'. Biomedical Engineering - Applications, Basis and Communications, 28 (6). pp. 1650040 - 1650040. ISSN: 1016-2372
Sreekumar, VM. and Eskin, DG. (2016) 'A new Al-Zr-Ti master alloy for ultrasonic grain refinement of wrought and foundry aluminum alloys'. Journal of Metals (JOM), 68 (12). pp. 3088 - 3093. ISSN: 1543-1851 Open Access Link
Bolzoni, L. and Nadendla, H. (2016) 'Engineering the heterogeneous nuclei in Al-Si alloys for solidification control'. Applied Materials Today, 5. pp. 255 - 259. ISSN: 2352-9407 Open Access Link
Noh, Y., Bimbo, J., Stilli, A., Wurdemann, H., Liu, H., Housden, J., et al. (2016) 'A new miniaturised multi-axis force/torque sensors based on optoelectronic technology and simply-supported beam'.2016 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS). Daejeon, SOUTH KOREA. 28 - 14 October. IEEE. pp. 202 - 207. ISSN: 2153-0858
Lindenroth, L., Back, J., Schoisengeier, A., Noh, Y., Würdemann, H., Althoefer, K. and et al. (2016) 'Stiffness-based modelling of a hydraulically-actuated soft robotics manipulator'.2016 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS). Daejeon, SOUTH KOREA. 28 - 14 October. IEEE. pp. 2458 - 2463. ISSN: 2153-0858
Chathuranga, DS., Wang, Z., Noh, Y., Nanayakkara, T. and Hirai, S. (2016) 'A soft three axis force sensor useful for robot grippers'.2016 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS). Daejeon, SOUTH KOREA. 28 - 14 October. IEEE. pp. 5556 - 5563. ISSN: 2153-0858
Bison, G., Pozzan, L. and Anguilano, L. (2016) 'Metallurgical evidence from a late antique context in the Forum of Grumentum'. Materials and Manufacturing Processes. pp. 1 - 9. ISSN: 1042-6914 Open Access Link
Rahimian, M., Ji, S., Fan, Z., Blake, P. and Watson, D. (Accepted) 'A casting alloy'.Open Access Link
Ji, S., Wang, Y. and Zhang, Y. (Accepted) 'Methods and process to improve the mechanical properties of cast aluminium alloys at ambient temperature and at elevated temperatures'.
Ji, S., Zhang, Y., Fan, Z. and Scamans, G. (Accepted) 'Overcasting for A356/A6062 hybrid structure'.
Gibbs, J., Gkatzidou, V., Tickle, L., Manning, SR., Tilakkumar, T., Hone, K., et al. (2016) '‘Can you recommend any good STI apps?’ A review of content, accuracy and comprehensiveness of current mobile medical applications for STIs and related genital infections'. Sexually Transmitted Infections, 93 (4). pp. sextrans-2016-052690 - sextrans-2016-052690. ISSN: 1368-4973 Open Access Link
Paz, R., Monzón, MD., González, B., Pei, E., Winter, G. and Ortega, F. (2016) 'Lightweight parametric optimisation method for cellular structures in additive manufactured parts'. International Journal for Simulation and Multidisciplinary Design Optimization, 7. pp. A6 - A6. ISSN: 1779-627X Open Access Link
Dong, W., Yang, D., Zhou, X., Kastiukas, G. and Zhang, B. (2016) 'Experimental and Numerical Investigations on Fracture Process Zone of Rock-Concrete Interface'. Fatigue and Fracture of Engineering Materials and Structures, 40 (5). pp. 820 - 835. ISSN: 8756-758X Open Access Link