Kalganova, T. (1997) 'Combinational multiple-valued circuit design by generalised disjunctive decomposition'.Proc. Of the European Conference on Circuit Theory and Design, ECCTD'97.. Budapest, Hungary. ECCTD’97 committees. pp. 695 - 700.Open Access Link

Liu, J., Ghobadian, A., Woo, H., Gallear, D. and Viney, H. (1997) 'Strategic Planning and Performance Measures: The Case for SMEs', in Thor, C., Edosomwan, J A., Poupart, R. and Sumanth, D J. (eds.) Productivity & Quality Management Frontiers-VI. Norcross : Industrial Engineering Management Press. pp. 177 - 191. ISBN 10: 0-89806-172-5.

Kalganova, T. (1997) 'The combined decomposition method for incompletely specified multiple-valued functions.'.The 2nd International Conference on Modern Connection Devices, CCC'97. Naroch, Belarus. Belarussian Engineering Academy. pp. 71 - 77.

Huang, Y. and Humphreys, FJ. (1997) 'Transient dynamic recrystallization in aluminium subjected to large reductions in strain rate'.2nd International Conference on Thermomechanical Processing of Steels and Other Materials (THERMEC 97). UNIV WOLLONGONG, WOLLONGONG, AUSTRALIA. 1 - 11 July. MINERALS, METALS & MATERIALS SOC. pp. 987 - 993.

Huang, Y. and Humphreys, FJ. (1997) 'Transient dynamic recrystallization in an aluminium alloy subjected to large reductions in strain rate'. Acta Materialia, 45 (11). pp. 4491 - 4503. ISSN: 1359-6454

Wang, B., Xiao, ZM. and Lu, G. (1997) 'Transient response of a right-angled bent cantilever subjected to out-of plane tip loading'.ASME 1997 Turbo Asia Conference. American Society of Mechanical Engineers.

Campbell, J. and Vignjevic, R. (1997) 'Development of lagrangian hydrocode modelling for debris impact damage prediction'. International Journal of Impact Engineering, 20 (1-5). pp. 143 - 152. ISSN: 0734-743X

Alfano, G., DeAngelis, F. and Rosati, L. (1997) 'A numerical algorithm for plane stress elastoplasticity'.5th International Conference on Computational Plasticity (COMPLAS V). BARCELONA, SPAIN. 1 - 20 March. INT CENTER NUMERICAL METHODS ENGINEERING. pp. 343 - 348.

Alfano, G., Migliardi, C. and Rosati, L. (1997) 'Solution strategies for complementary mixed methods in elastoplasticity'.5th International Conference on Computational Plasticity (COMPLAS V). BARCELONA, SPAIN. 1 - 20 March. INT CENTER NUMERICAL METHODS ENGINEERING. pp. 548 - 553.

Kalganova, T. and Pshibytko, V. (1997) 'Time complexity analysis of generalized decomposition algorithm'. .

Kalganova, T. and Miller, J. (1997) 'Evolutionary Approach to Design Multiple-Valued Combinational Circuits'. Proc. 4th-Int. Conf. on Applications of Computer Systems. pp. 333 - 339.

Macredie, RD. and Keeble, RJ. (1997) 'Software agents and agency: Personal information management perspective'. Personal and Ubiquitous Computing, 1 (2). pp. 88 - 100. ISSN: 1617-4909

Ghobadian, A., Gallear, D. and Liu, J. (1997) 'TQM in Best Practice Manufacturing Organisations', in Harrison, D K. (ed.) Advances in Manufacturing Technology XI. ISBN 1-9012-4811-9. pp. 181 - 185.

Mares, C., Surace, G., Anghel, V. and Mares, C. (1997) 'Coupled Bending-Bending-Torsion Vibration Analysis of Rotating Pretwisted Beams. An Integral Formulation and Numerical Examples'.3rd European Conference on Structural Dynamics EURODYN 1996. Florence, Italia. 1 - 8 June. Elsevier BV. pp. 473 - 486. ISSN: 0022-460X

Ghobadian, A., Gallear, D. and Liu, J. (1997) 'TQM in Manufacturing', in Monoghan, J. and Lyons, C. (eds.) Sustainable Technology in Manufacturing Industries. iSBN 1-897606-16-1. pp. 841 - 850.

Eskin, D., Pimenov, YP. and Kharakterova, ML. (1997) 'Structure and phase composition of hypereutectic silumins intended for deformation'. Rossiiskaya Akademiya Nauk. Izvestiya. Metalls. pp. 91 - 98. ISSN: 0568-5303

Kharakterova, ML., Eskin, DG. and Rokhlin, LL. (1997) 'Influence of scandium and zirconium on structure and hardening of Al-Mg-Si alloys in ageing'. Russian Academy of Sciences. Izvestiya. Metals. pp. 123 - 128. ISSN: 0568-5303

Xu, Y-M. and Kim, J-D. (1997) 'A study on the development of nonwoven abrasive pads and characteristics of electrolytic machining'.Korean Society of Machine-Tool Engineers (KSMTE) 1997 Fall Annual Meeting. Korea. Proceedings of KSMTE 1997 Fall Annual Meeting. pp. 190 - 195.

Xu, Y-M. and Kim, J-D. (1997) 'A study on the development of nonwoven abrasive pads of SiC/Al2O3 (in Korean)'.Korean Society of Mechanical Engineers (KSME) 1997 Fall Annual Meeting A. Korea. Proceedings of KSME 1997 Fall Annual Meeting A. pp. 815 - 820.

Winter, M. (1997) 'An example of microstructure with multiple scales'. European Journal of Applied Mathematics, 8 (2). pp. 185 - 207. ISSN: 0956-7925 Open Access Link

Ren, X. and Winter, M. (1997) 'Young measures in a nonlocal phase transition problem'. Proceedings of the Royal Society of Edinburgh Section A Mathematics, 127 (3). pp. 615 - 637. ISSN: 0308-2105 Open Access Link

Kalganova, T., Kochergov, E. and Strechen, N. (1997) 'Using a genetic algorithm for optimizing the functional decomposition of multiple-valued functions'.Proc. of the 5th European Congress on Intelligent Techniques and Soft Computing, EUFIT’97.. Aachen, Germany. ELITE - European Laboratory for Intelligent Techniques Engineering. pp. 826 - 830.Open Access Link

Kalganova, T., Lipnitskaya, N. and Holowinski, G. (1997) 'Modular decomposition of the NOR-TSUM multiple-valued PLA'. Committees of International Scientific Symposium of Students and Young Research Workers.Open Access Link

Kalganova, T. and Pshibytko, V. (1997) 'Time complexity analysis of generalized decomposition algorithm'.19th International Scientific Symposium of Students and Young Research Workers. Zielona Gora, Poland. Citeseer. pp. 145 - 149.Open Access Link

Kalganova, T. (1997) 'The time performance analysis for algorithm to define the best decomposition of the multiple-valued logic function. (in Russian)'.The Scientific Symposium of Students and Young Research. Minsk. Belarus.

Fang, C., de Groot, R. and Haas, C. (1997) 'Bulk and surface electronic structure of and'. Physical Review B - Condensed Matter and Materials Physics, 56 (8). pp. 4455 - 4463. ISSN: 1098-0121

Enayati, MH., Chang, ITH., Schumacher, P. and Cantor, B. (1997) 'Mechanical alloying of Ni-Nb alloys'. Materials Science Forum, 235-238 (PART 1). pp. 85 - 90. ISSN: 0255-5476

Fang, CM., De Groot, RA., Wiegers, GA. and Haas, C. (1997) 'Electronic structure and evidence for La vacancies in the misfit layer compound (La1-xS)1.20CrS2'. Journal of Physics and Chemistry of Solids, 58 (7). pp. 1103 - 1109. ISSN: 0022-3697

Fan, Z. (1997) 'Microstructural approach to the effective transport properties of MMCs and CMCs'. Key Engineering Materials, 127-131 (Pt 2). pp. 1207 - 1214. ISSN: 1013-9826

Boccaccini, AR. and Fan, Z. (1997) 'A new approach for the young's modulus-porosity correlation of ceramic materials'. Ceramics International, 23 (3). pp. 239 - 245. ISSN: 0272-8842

Fan, Z., Niu, HJ., Miodownik, AP., Saito, T. and Cantor, B. (1997) 'Microstructure and mechanical properties of in situ Ti/TiB MMCs produced by a blended elemental powder metallurgy method'. Key Engineering Materials, 127-131. pp. 423 - 430. ISSN: 1013-9826

Fan, Z., Grant, PS. and Cantor, B. (1997) 'Manufacture of hoop reinforced Ti-MMC rings by spray/wind process'. Key Engineering Materials, 127-131. pp. 335 - 342. ISSN: 1013-9826

Qiu, H., Cheng, K. and Li, Y. (1997) 'Optimal circular arc interpolation for NC tool path generation in curve contour manufacturing'. CAD Computer Aided Design, 29 (11). pp. 751 - 760. ISSN: 0010-4485

Qi, K. and Huang, R. (1997) 'Thickening of Melt During Processing of PES: A Structural Investigation'. Polymer-Plastics Technology and Engineering, 36 (1). pp. 123 - 134. ISSN: 0360-2559

Mares, C. and Surace, C. (1997) 'Updating rotor-bearing finite element models'.ASME 1997 Design Engineering Technical Conferences. American Society of Mechanical Engineers.

Fang, CM., Wiegers, GA. and Haas, C. (1997) 'Photoelectron spectra of the late rare-earth misfit layer compounds (LnS)1 + x TS2 (Ln = Tb, Dy, Ho; T = Nb, Ta)'. Physica B: Condensed Matter, 233 (2-3). pp. 134 - 138. ISSN: 0921-4526

Ji, S., Li, Z., Wan, L., Deng, J. and Yang, G. (1996) 'A CAD Software for Diecasting Gate System Based on 3D Solid Modelling (in Chinese)'. China Foundry Machinery and Technology, 1996 (6). pp. 47 - 51.

Li, Z., Wei, H., Ji, S. and Yang, G. (1996) 'DCDDI software -- Study of die-casting gating CAD system (in Chinese)'. Te Zhong Zhu Zao Ji You Se He Jin/Journal of Special Casting & Nonferrous Alloys, 1996 (6). pp. 21 - 26. ISSN: 1001-2249

Mikhailov, SE. (1996) 'Analysis of singular stress asymptotics in bonded hereditarily-elastic aging bodies'. ZAMM Zeitschrift fur Angewandte Mathematik und Mechanik, 76 (SUPPL. 5). pp. 339 - 340. ISSN: 0044-2267

Wills, DPM., Logan, IP., Macredie, RD., Sherman, KP. and Mohsen, AMMA. (1996) 'Human factors issues in the design of an arthroscopic simulator'. IEE Colloquium (Digest). ISSN: 0963-3308

Boccaccini, AR. and Fan, Z. (1996) 'Comment on “Simple Mathematical Model for the Electrical Conductivity of Highly Porous Ceramics”'. Journal of the American Ceramic Society, 79 (11). pp. 2997 - 2998. ISSN: 0002-7820

Ji, S., Zhang, J. and Wan, L. (1996) 'Development of compacting equipment for lost foam process (in Chinese)'. Foundry, 1996 (10). pp. 25 - 28. ISSN: 1001-4977

Zou, L., Yang, Q., Jovanovski, V., Tay, WM. and Lynch, E. (1996) 'Measurement of tooth morphology using a laser probe fitted on a coordinate measuring machine'.4th International IMEKO Symposium on Laser Metrology for Precision Measurement and Inspection in Industry. Copenhagen. 4th International IMEKO Symposium on Laser Metrology for Precision Measurement and Inspection in Industry. pp. 11 - 20.

Ghobadian, A., Liu, J., Gallear, D. and Woo, H. (1996) 'Strategies for integrating quality and business processes'. Aston Business School, Birmingham. 16 - 18 September. Proceedings of British Academy of Management Annual Conference.

Mikhailov, SE. (1996) 'On a functional description of non-local strength and fracture. Existence and uniqueness.'.11th Biennial European Conference on Fracture (ECF 11). POITIERS FUTUROSCOPE, FRANCE. 3 - 6 September. ENGINEERING MATERIALS ADVISORY SERVICES LTD. pp. 195 - 200.

Kalganova, T. and Cheushev, V. (1996) 'The Automating Clerical Work Systems: Educational Aspects. (in Russian)'. Minsk, Republic of Belarus. Proc of the 2-nd International Conference on New Information Technologies in Education. pp. 312 - 319.

Kalganova, T. (1996) 'The studding of the Functional Decomposition Methods for r-valued logic functions in the logic design courses. (in Russian)'. Minsk, Republic of Belarus. Proc of the 2-nd International Conference on New Information Technologies in Education. pp. 150 - 158.

Kalganova, T., Kochergov, E., Zaitseva, E. and Yanushkevich, S. (1996) 'A Genetic Approach to Optimise Polynomial Forms of Incompletely Specified MVL Functions.'.AISB96 Workshop on Evolutionary Computing. Brighton, UK.

Takang, AA., Grubb, PA. and Macredie, RD. (1996) 'The effects of comments and identifier names on program comprehensibility: An experimental investigation'. Journal of Programming Languages, 4 (3). pp. 143 - 167. ISSN: 0963-9306

Rotter, KRG., Atherton, MA. and Millar, BJ. (1996) 'Measurement of tooth wear using laser scanning'.International Conference on Mechatronics. Portugal. [unpublished]

Mares, C. and Surace, C. (1996) 'An Application of Genetic Algorithms to Identify Damage in Elastic Structures'. Journals of Sound and Vibration, 195 (2). pp. 195 - 215. ISSN: 0022-460X