Davis, G., Bulson, H., Harrison, D. and Billett, E. (2005) 'An evaluation of degradable polyethylene (pe) sacks in open windrow composting'. Compost Science and Utilization, 13 (1). pp. 50 - 59. ISSN: 1065-657X

Vignjevic, R., Lepage, S. and De Vuyst, T. (2005) 'Simulation of high velocity impacts on thin metallic targets II (Discrete elements)'.International Conference on Impact Loading of Lightweight Structures. Florianopolis, BRAZIL. 1 - 12 May. WIT PRESS. pp. 575 - 582. ISSN: 1746-4471

Cheng, H., Wang, Y., Feng, Z. and Cheng, K. (2005) 'Surface roughness and removal rate in magnetorheological finishing of a subsurface damage free surface'. Progress in Natural Science, 15 (6). pp. 538 - 544. ISSN: 1002-0071

Mohd Hussin, Z., Cheng, K., Crispin, A. and Ward, R. (2005) 'On-line measurement of workpiece surface topography and texture by using laser scattering'. Laser Metrology and Machine Performance VII - 7th International Conference and Exhibition on Laser Metrology, Machine Tool, CMM and Robotic Performance, LAMDAMAP 2005. pp. 574 - 583.

Lu, B. and Cheng, K. (2005) 'RFID technology for manufacturing: Application perspectives'. Laser Metrology and Machine Performance VII - 7th International Conference and Exhibition on Laser Metrology, Machine Tool, CMM and Robotic Performance, LAMDAMAP 2005. pp. 442 - 453.

Sun, X., Chen, S. and Cheng, K. (2005) 'An analytic design and calculation method for the aerostatic slideways'. Laser Metrology and Machine Performance VII - 7th International Conference and Exhibition on Laser Metrology, Machine Tool, CMM and Robotic Performance, LAMDAMAP 2005. pp. 344 - 353.

Zong, WJ., Li, D., Wang, HX., Sun, T., Cheng, K. and Chen, MJ. (2005) 'Time series analysis for the mechanical lapping of single crystal diamond cutting tools'. Key Engineering Materials, 291-292. pp. 331 - 336. ISSN: 1013-9826

(2005) 'Five Discussions from the January/February 2005 ACI Structural Journal'. ACI Structural Journal, 102 (6). ISSN: 0889-3241

Das, A. and Fan, ZY. (2005) 'Semi-solid processing of metallic alloys', inThe Deformation and Processing of Structural Materials: A Volume in Woodhead Publishing Series in Civil and Structural Engineering. pp. 252 - 283.

Daneshvar, S. and Ghassemian, H. (2005) 'A hybrid algorithm for medical image registration'.2005 IEEE Engineering in Medicine and Biology 27th Annual Conference. Shanghai, PEOPLES R CHINA. 1 - 18 January. IEEE. pp. 3272 - 3275. ISSN: 0589-1019

Kazilas, MC., Skordos, AA. and Partridge, IK. (2005) 'Parameter estimation in equivalent circuit analysis of dielectric cure monitoring signals using genetic algorithms'. Inverse Problems in Science and Engineering, 13 (2). pp. 157 - 176. ISSN: 1741-5977

Dowlen, C. and Atherton, M. (2005) 'What is Design?', in Collins, MW., Atherton, MA. and Bryant, JA. (eds.) Nature and Design. Southampton : WIT Press. , 1. pp. 1 - 15. ISBN 10: 185312852X.

Vignjevic, R., Lepage, S. and De Vuyst, T. (2005) 'Simulation of high velocity impacts on thin metallic targets I (Element erosion)'.International Conference on Impact Loading of Lightweight Structures. Florianopolis, BRAZIL. 1 - 12 May. WIT PRESS. pp. 563 - 574. ISSN: 1746-4471

Kim, JS., Chang, I., Jiang, K. and Falticeanu, CL. (2005) 'Sintering of loosely packed powder mixture of ultrafine aluminium and nanopowder of Cu and Sn'. Euro PM 2005: Powder Metallurgy Congress and Exhibition. pp. 219 - 224.

Vignjevic, R., Lepage, S. and De Vuyst, T. (2005) 'Simulation of high velocity iipacts on thin metallic targets III (SPH)'.International Conference on Impact Loading of Lightweight Structures. Florianopolis, BRAZIL. 1 - 12 May. WIT PRESS. pp. 583 - 594. ISSN: 1746-4471

Chong, TP. and Zhong, S. (2005) 'On the three dimensional structure of turbulent spots'. ASME Transactions: Journal of Turbomachinery, 127. pp. 545 - 551.

Kalganova, T. (2005) 'SPEEDING UP A SCALABLE MODULAR INVERSION HARDWARE ARCHETECTURE'. .

Gutub, AA-A. and Kalganova, T. (2005) 'Speeding Up a Scalable Modular Inversion Hardware Architecture'. Place of publication: KFUPM.Open Access Link

Eskin, DG., Savran, VI. and Katgerman, L. (2005) 'Erratum: "Effects of melt temperature and casting speed on the structure and defect formation during direct-chill casting of an Al-Cu alloy" (Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science (2005) vol. 36A (1965-1976))'. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 36 (9). pp. 2561. ISSN: 1073-5623

Zhou, X. and Li, Z. (2005) 'Characterization of Rheology of Fresh Fiber Reinforced Cementitious Composites through Ram Extrusion'. Materials and Structures, 38 (1). pp. 17 - 24. ISSN: 1359-5997

Eskin, DG., Du, Q., Ruvalcaba, D. and Katgerman, L. (2005) 'Experimental study of structure formation in binary Al-Cu alloys at different cooling rates'. Materials Science and Engineering A: Structural Materials Properties Microstructure and Processing, 405 (1-2). pp. 1 - 10. ISSN: 0921-5093

Mitrovic, IZ., Buiu, O., Hall, S., Zhang, J., Wang, Y., Hemment, PLF., El Mubarek, HAW. and Ashburn, P. et al. (2005) 'Electrical and materials characterization of GSMBE grown Si 1-x-yGexCy layers for heterojunction bipolar transistor applications'. Semiconductor Science and Technology, 20 (1). pp. 95 - 102. ISSN: 0268-1242

Aziz, M. and Macredie, RD. (2005) 'Proposing a perceived ease of use factors taxonomy for information system use'.IEEE SoutheastCon, 2005.. Ft Lauderdale, FL. 1 - 10 April. IEEE. pp. 468 - 476. ISSN: 1091-0050

Shahverdi, H., Mares, C. and Mottershead, JE. (2005) 'Model structure correction and updating of aeroengine casings using fictitious mass modifications'. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 219 (1). pp. 19 - 30. ISSN: 0954-4062

Zong, WJ., Li, D., Wang, HX., Sun, T., Cheng, K. and Chen, MJ. (2005) 'Time series analysis for the mechanical lapping of single crystal diamond cutting tools'. Trans Tech Publications, Ltd.. pp. 331 - 336. ISSN: 1013-9826

Kim, JS., Jiang, K., Chang, I. and Falticeanu, CL. (2005) 'Micro-moulding of Al alloy powder mixture containing ultrafine AL and nano-sized Cu particles'. Euro PM 2005: Powder Metallurgy Congress and Exhibition. pp. 399 - 404.

Falticeanu, LC., Chang, ITH., Falticeanu, CT. and Ciortan, S. (2005) 'New methods for assessing the frictional properties in a mass of consolidated powders'. Tribology in Industry, 27 (1-2). pp. 17 - 21. ISSN: 0354-8996

Cheng, K. (2004) 'Internet-based e-manufacturing: Fundamentals and application perspectives'. Proceedings of the Eighth IASTED International Conference on Internet and Multimedia Systems and Applications. pp. 25 - 29.

Shaw, S. and Whiteman, JR. (2004) 'A posteriori error estimates for space–time finite element approximation of quasistatic hereditary linear viscoelasticity problems'. Computer Methods in Applied Mechanics and Engineering, 193 (52). pp. 5551 - 5572. ISSN: 0045-7825

Attema, JJ., Fang, CM., Chioncel, L., De Wijs, GA., Lichtenstein, AI. and De Groot, RA. (2004) 'Defects in half-metals and finite temperature'. Journal of Physics Condensed Matter, 16 (48). pp. S5517 - S5524. ISSN: 0953-8984

Li, L., Harrison, DK., Lynn, JS. and Cheng, K. (2004) 'Implementation perspectives of design re-use through global manufacturing'. Advances in e-Engineering and Digital Enterprise Technology - I. Proceedings of the Fourth International Conference on e-Engineering and Digital Enterprise Technology. pp. 73 - 81.

Stephan, EP., Maischak, M. and Leydecker, F. (2004) 'HP-adaptive boundary element method for electromagnetic problems'. ECCOMAS 2004 - European Congress on Computational Methods in Applied Sciences and Engineering.

Cheng, K. and Webb, D. (2004) 'Advances in e-Engineering and Digital Enterprise Technology - I. Proceedings of the Fourth International Conference on issue data: 2004//: Preface'. Advances in e-Engineering and Digital Enterprise Technology - I. Proceedings of the Fourth International Conference on e-Engineering and Digital Enterprise Technology.

Luo, X., Liu, Y., Cheng, K. and Luo, X. (2004) 'A simulated investigation on the machining instability and dynamic surface generation'. Progress of Machining Technology - Proceedings of the Seventh International Conference on Progress of Machining Technology, ICPMT'2004. pp. 468 - 473.

Bllau, K., Cheng, K., Whitbread, M. and Taylor, GE. (2004) 'Development of a web-based condition monitoring and control system for CNC milling processes'. Advances in e-Engineering and Digital Enterprise Technology - I. Proceedings of the Fourth International Conference on e-Engineering and Digital Enterprise Technology. pp. 391 - 400.

Fang, CM., Hintzen, HT. and De With, G. (2004) 'High-pressure phases of MgSiN2 from first-principles calculations'. Applied Physics A: Materials Science and Processing, 78 (5). pp. 717 - 719. ISSN: 0947-8396

Li, YQ., Fang, CM., De With, G. and Hintzen, HT. (2004) 'Preparation, structure and photoluminescence properties of Eu ²⁺ and Ce ³⁺-doped SrYSi 4N 7'. Journal of Solid State Chemistry, 177 (12). pp. 4687 - 4694. ISSN: 0022-4596

Alfano, G., De Barros, S., Champaney, L. and Valoroso, N. (2004) 'Comparison between two cohesive-zone models for the analysis of interface debonding'. ECCOMAS 2004 - European Congress on Computational Methods in Applied Sciences and Engineering.

Alfano, G., Marfia, S. and Sacco, E. (2004) 'Influence of water pressure on crack propagation in concrete dams'. ECCOMAS 2004 - European Congress on Computational Methods in Applied Sciences and Engineering.

Maischak, M. and Stephan, EP. (2004) 'Adaptive HP-versions of boundary element methods for elastic contact problems'. ECCOMAS 2004 - European Congress on Computational Methods in Applied Sciences and Engineering.

Mares, C., Mottershead, JE. and Friswell, MI. (2004) 'Stochastic model updating of a spot welded structure'. Proceedings of the 2004 International Conference on Noise and Vibration Engineering, ISMA. pp. 1885 - 1898.

Morar, SS. and Macredie, RD. (2004) 'Special issue on 'interacting with desktop virtual environments: Perception and navigation''. Virtual Reality, 7 (3-4). pp. 129 - 130. ISSN: 1359-4338

Morar, SS. and Macredie, RD. (2004) 'Usability issues of desktop virtual environment applications'. Virtual Reality, 7 (3-4). pp. 175 - 176. ISSN: 1359-4338

Tehrani, MG., Wang, W., Mares, C. and Mottershead, JE. (2004) 'Vibration suppression using Vincent's circle'. Proceedings of the 2004 International Conference on Noise and Vibration Engineering, ISMA. pp. 603 - 610.

Fan, Z., Ji, S. and Fang, X. (2004) 'Rheo-diecasting of aluminium alloys and components'. Limassol, Cyprus. 1 Proceedings of the 8th International Conference on Semi-Solid Processing of Alloys and Composites, S2P 2004. pp. 111 - 120.

Pandit, H., Mishra, A., Babu, NH., He, P., Isfort, D., Chaud, X., Ferendeci, AM., Cardwell, DA., Tournier, R., Mast, D. and Shi, D. et al. (2004) 'RF property characterization of single domain YBa 2Cu 3O x'. Materials Research Society Symposium Proceedings. pp. 181 - 183. ISSN: 0272-9172

Campbell, AM., Loram, JW., Hari-Babu, N., Cooper, JR. and Cardwell, DA. (2004) 'Reversible magnetization of a strong-pinning superconductor'. Physical Review B - Condensed Matter and Materials Physics, 70 (21). pp. 1 - 6. ISSN: 1098-0121

Ji, S., Liu, G., Zhang, E. and Fan, Z. (2004) 'Development of the rheo-diecasting process for Mg- alloys and their components'. Limassol, Cyprus. 1 Proceedings of the 8th International Conference on Semi-Solid Processing of Alloys and Composites, S2P 2004. pp. 285 - 290.

Sefcikova, M., Zmorayová, K., Diko, P., Babu, NH. and Cardwell, DA. (2004) 'Nanosized pinning centers in YBCO bulk superconductors with complex alloying'. Czechoslovak Journal of Physics, 54 (SUPPL. 4). pp. 473 - 476. ISSN: 0011-4626

Zmorayová, K., Šefčíková, M., Diko, P., Babu, NH. and Cardwell, DA. (2004) 'New pinning centres in YBCO bulk supreconductors with depleted uranium addition'. Czechoslovak Journal of Physics, 54 (SUPPL. 4). pp. 469 - 472. ISSN: 0011-4626

Bateman, RJ. and Cheng, K. (2004) 'Internet-based, end-user design and e-manufacture'. Advances in e-Engineering and Digital Enterprise Technology - I. Proceedings of the Fourth International Conference on e-Engineering and Digital Enterprise Technology. pp. 15 - 23.