IMM
Wang, K., Liu, Y. and Wang, B. (2019) 'Follow-up optimized phononic band structure design based on reserved inclusions'. Physica B: Condensed Matter, 564. pp. 157 - 165. ISSN: 0921-4526 Open Access Link
Zhang, B., Huang, Z., Rahi, BH., Wang, Q. and Li, M. (2019) 'Online semi-supervised multi-person tracking with gaussian process regression'.2018 International Joint Conference on Metallurgical and Materials Engineering (JCMME 2018). Wellington, New Zealand. 2 - 12 December. EDP Sciences. pp. 1 - 8. ISSN: 2274-7214 Open Access Link
Omairey, SL., Dunning, PD. and Sriramula, S. (2019) 'Development of an ABAQUS plugin tool for periodic RVE homogenisation'. Engineering with Computers, 35 (2). pp. 567 - 577. ISSN: 0177-0667
Vignjevic, R., Djordjevic, N., Wasilczuk, A., De Vuyst, T. and Meo, M. (2019) 'On high velocity impact on carbon fibre reinforced polymers'.SPIE Smart Structures + Nondestructive Evaluation. Denver, Colorado, United States. 29 - 7 March. SPIE. pp. 45 - 45. ISSN: 0277-786X Open Access Link
Zhao, L., Cheng, K., Ding, H. and Zhao, L. (2019) 'On-Machine Measurement of the Straightness and Tilt Errors of a Linear Slideway Using a New Four-Sensor Method'. Chinese Journal of Mechanical Engineering (English Edition), 32 (1). pp. 1 - 11. ISSN: 1000-9345 Open Access Link
Nam, S. and Pei, E. (2019) 'A taxonomy of shape-changing behavior for 4D printed parts using shape-memory polymers'. Progress in Additive Manufacturing, 4 (2). pp. 167 - 184. ISSN: 2363-9512 Open Access Link
Chang, I., Cary, J., Gorges, R., Laing, I. and Latham, D. (Accepted) 'Sliding Component and Method'.
Shaw, S. (2019) 'An a priori error estimate for a temporally discontinuous Galerkin space-time finite element method for linear elasto- and visco-dynamics'. Computer Methods in Applied Mechanics and Engineering, 351. pp. 1 - 19. ISSN: 0045-7825 Open Access Link
Kudryashova, O., Khmeleva, M., Danilov, P., Dammer, V., Vorozhtsov, A. and Eskin, D. (2019) 'Optimizing the Conditions of Metal Solidification with Vibration'. Metals, 2019 (9). pp. 1 - 13. ISSN: 2075-4701 Open Access Link
Al-Isawi, AT., Collins, PEF. and Cashell, KA. (2019) 'Fully Non-Linear Numerical Simulation of a Shaking Table Test of Dynamic Soil-Pile-Structure Interactions in Soft Clay Using ABAQUS'.Eighth International Conference on Case Histories in Geotechnical Engineering. Philadelphia, Pennsylvania. 21 - 27 March. American Society of Civil Engineers. pp. 252 - 265. ISSN: 0895-0563 Open Access Link
Liu, G., Khorsand, S. and Ji, S. (2019) 'Electrochemical corrosion behaviour of Sn-Zn-xBi alloys used for miniature detonating cords'. Journal of Materials Science and Technology, 35 (8). pp. 1618 - 1628. ISSN: 1005-0302 Open Access Link
Jiang, P. and Atherton, M. (2019) 'Additive Manufacture of passive acoustic filters: a feasibility study'.Rapid Design Prototyping and Manufacturing 16th Conference. Brunel University London.Open Access Link
Pei, E. (2019) 'Editorial'. Progress in Additive Manufacturing, 4 (1). pp. 1 - 2. ISSN: 2363-9512
Dinsdale, A., Fang, C., Que, Z. and Fan, Z. (2019) 'Understanding the Thermodynamics and Crystal Structure of Complex Fe Containing Intermetallic Phases Formed on Solidification of Aluminium Alloys'. JOM, 71 (5). pp. 1731 - 1736. ISSN: 1047-4838 Open Access Link
Almurshedi, A., Atherton, M., Mares, C. and Stolarski, T. (2019) 'Modelling influence of Poisson's contraction on squeeze film levitation of planar objects'. Journal of Applied Physics, 125 (9). pp. 1 - 12. ISSN: 0021-8979 Open Access Link
Nam, S. and Pei, E. (2019) 'Mechanical analysis of Shape changing behavior of 4D Printed Parts'.16th Rapid Design, Prototyping and Manufacturing Conference (RDPM2019). Brunel University London, UK.Open Access Link
Loh, GH. and Pei, E. (2019) 'Design for Material Extrusion on Mesh Fabrics'.16th Rapid Design, Prototyping and Manufacturing Conference (RDPM2019). Brunel University London, UK.Open Access Link
Loh, GH. and Pei, E. (2019) 'Building a conceptual understanding of Functionally Graded Additive Manufacturing'.15th Rapid Design, Prototyping and Manufacturing Conference (RDPM2017). Northumbria University, Newcastle.Open Access Link
Dong, W., Yuan, W., Zhou, X. and Zhao, X. (2019) 'Influence of specimen geometries and drying conditions on concrete cracking in restrained elliptical ring tests'. Construction and Building Materials, 207. pp. 273 - 283. ISSN: 0950-0618 Open Access Link
Wang, F. and Fan, Z. (2019) 'Characterization of AlN Inclusion Particles Formed in Commercial Purity Aluminum'. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 50 (5). pp. 1 - 18. ISSN: 1073-5623 Open Access Link
Atherton, M., Hill, S., Harrison, D. and Ajovalsit, M. (2019) 'Economic and Technical Feasibility of a Robotic Autonomous System for Train Fluid Servicing'. Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, 234 (3). pp. 1 - 13. ISSN: 0954-4097 Open Access Link
Amini, A. and Banitsas, K. (2019) 'Using Kinect v2 to Control a Laser Visual Cue System to Improve the Mobility during Freezing of Gait in Parkinson’s Disease'. Journal of Healthcare Engineering, 2019 (Unobtrusive Sensing Technologies for the Lifecare Solution). pp. 1 - 8. ISSN: 2040-2295 Open Access Link
Gao, Q., Chen, W., Lu, L., Huo, D. and Cheng, K. (2019) 'Aerostatic bearings design and analysis with the application to precision engineering: State-of-the-art and future perspectives'. Tribology International, 135. pp. 1 - 17. ISSN: 0301-679X
Salloum-abou-jaoude, G., Eskin, D., Lebon, B., Barbatti, C., Jarry, P. and Jarrett, M. (2019) 'Altering the Microstructure Morphology by Ultrasound Melt Processing during 6XXX Aluminium DC-Casting'.TMS 2019 Annual Meeting & Exhibition. San Antonio, Texas. 16 - 14 March. Springer International Publishing. pp. 1605 - 1610. ISSN: 2367-1181 Open Access Link
Chankitmunkong, S., Eskin, DG. and Limmaneevichitr, C. (2019) 'Effect of Cu addition on the microstructure, mechanical and thermal properties of a piston Al-Si alloy'.Light Metals 2019 (TMS 2019 Annual Meeting and Exhibition). San Antonio, Texas, USA. 16 - 14 March. Springer International Publishing. pp. 463 - 469. ISSN: 2367-1181 Open Access Link
Mi, J., Eskin, D., Connolley, T. and Fezzaa, K. (2019) 'Understanding the highly dynamic phenomena in ultrasonic melt processing by ultrafast synchrotron x-ray imaging'.Light Metals Symposium at the 148th TMS Annual Meeting. San Antonio, TX. 16 - 12 March. Springer International Publishing. pp. 1539 - 1544. ISSN: 2367-1181 Open Access Link
Kohr, M., Mikhailov, SE. and Wendland, WL. (2019) 'Newtonian and single layer potentials for the Stokes system with L^∞ coefficients and the exterior Dirichlet problem', in Rogosin, S. and Çelebi, AO. (eds.) Analysis as a Life.. Birkhäuser. pp. 237 - 260. ISBN 10: 3030026493. ISBN 13: 9783030026493. Open Access Link
Yuan, Z., He, Y., Cheng, K., Duan, Z. and Wang, L. (2019) 'Effect of self-developed graphene lubricant on tribological behaviour of silicon carbide/silicon nitride interface'. Ceramics International, 45 (8). pp. 10211 - 10222. ISSN: 0272-8842
Dybalska, A., Eskin, DG. and Patel, JB. (2019) 'Optimal Stator Design for Oxide Films Shearing Found by Physical Modelling'.Materials Processing Fundamentals Symposium. San Antonio, Texas. 10 - 14 March. Springer International Publishing. pp. 181 - 192. ISSN: 2367-1181 Open Access Link
Maier, P., Lauth, N., Mendis, CL., Bechly, M. and Hort, N. (2019) 'Mechanical and Corrosion Properties of Two Precipitation-Hardened Mg-Y-Nd-Gd-Dy Alloys with Small Changes in Chemical Composition'. JOM, 71 (4). pp. 1426 - 1435. ISSN: 1047-4838 Open Access Link
Lebon, GSB., Salloum-Abou-Jaoude, G., Eskin, D., Tzanakis, I., Pericleous, K. and Jarry, P. (2019) 'Numerical modelling of acoustic streaming during the ultrasonic melt treatment of direct-chill (DC) casting'. Ultrasonics Sonochemistry, 54 (June 2019). pp. 171 - 182. ISSN: 1350-4177 Open Access Link
Niu, Z. and Cheng, K. (2019) 'An experimental investigation on surface generation in ultraprecision machining of particle reinforced metal matrix composites'. International Journal of Advanced Manufacturing Technology, 105 (11). pp. 4499 - 4507. ISSN: 0268-3768 Open Access Link
Asadzadeh, S., Daneshvar, S., Abedi, B., Sadeghzadeh Oskouei, B., Shahabi, P. and Jasemian, Y. (2019) 'Technical report: An advanced algorithm for the description of mice oocyte cytoplasm and polar body'. Biomedical Signal Processing and Control, 48. pp. 171 - 178. ISSN: 1746-8094
Eskin, D. and Wang, F. (2019) 'Joint Effect of Ultrasonic Vibrations and Solid Metal Addition on the Grain Refinement of an Aluminium Alloy'. Metals, 2019 (9). pp. 161 - 161. ISSN: 2075-4701 Open Access Link
Eftekharifar, S., Rezaii, TY., Beheshti, S. and Daneshvar, S. (2019) 'Block sparse multi-lead ECG compression exploiting between-lead collaboration'. IET Signal Processing, 13 (1). pp. 46 - 55. ISSN: 1751-9675
Maracci, D., Alfano, G., Serpieri, R. and Lenci, S. (2019) 'Characterising interfaces for reinforced concrete: Experiments and multiplane cohesive zone modelling for titanium alloy rebars'. European Journal of Mechanics, A/Solids, 75. pp. 258 - 276. ISSN: 0997-7538 Open Access Link
Zhao, L., Cheng, K., Chen, S., Ding, H. and Zhao, L. (2019) 'An approach to investigate moiré patterns of a reflective linear encoder with application to accuracy improvement of a machine tool'. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 233 (3). pp. 927 - 936. ISSN: 0954-4054
Shiva, A., Sadati, SMH., Noh, Y., Fraś, J., Ataka, A., Würdemann, H., et al. (2019) 'Elasticity Versus Hyperelasticity Considerations in Quasistatic Modeling of a Soft Finger-Like Robotic Appendage for Real-Time Position and Force Estimation'. Soft Robotics, 6 (2). pp. 228 - 249. ISSN: 2169-5172 Open Access Link
Zhang, Y., Wang, S., Lordan, E., Wang, Y. and Fan, Z. (2019) 'Improve mechanical properties of high pressure die cast Al9Si3Cu alloy via dislocation enhanced precipitation'. Journal of Alloys and Compounds, 785. pp. 1015 - 1022. ISSN: 0925-8388 Open Access Link
Ji, S. and Watson, D. (Accepted) 'A super ductile die cast aluminium alloy'.
Lebon, GSB., Tzanakis, I., Pericleous, K., Eskin, D. and Grant, PS. (2019) 'Ultrasonic liquid metal processing: The essential role of cavitation bubbles in controlling acoustic streaming'. Ultrasonics Sonochemistry, 55 (July 2019). pp. 243 - 255. ISSN: 1350-4177 Open Access Link
Dong, W., Zhao, X., Zhou, X. and Yuan, W. (2019) 'Effects of moisture gradient of concrete on fracture process in restrained concrete rings: Experimental and numerical'. Engineering Fracture Mechanics, 208. pp. 189 - 208. ISSN: 0013-7944 Open Access Link
Ji, S. and Amirkhanlou, S. (2019) 'Casting lightweight stiff aluminum alloys: a review'. Critical Reviews in Solid State and Materials Sciences, 45 (3). pp. 171 - 186. ISSN: 1040-8436 Open Access Link
Fang, CM., Disndale, A., Que, ZP. and Fan, Z. (2019) 'Intrinsic defects in and electronic properties of θ-Al13Fe4: an ab initio DFT study'. Journal of Physics: Materials, 2 (1). pp. 015004-1 - 015004-10.Open Access Link
Yusoff, SM. and Giacomin, J. (2019) 'The effect of vibrational energy distribution on the level of driver detection'.3rd International Conference on Automotive Innovation and Green Energy Vehicle (AiGEV 2018). Kuantan, Pahang, MALAYSIA. 11 - 26 July. Author(s). pp. 1 - 10. ISSN: 0094-243X Open Access Link
Nsengimana, J., Van der Walt, J., Pei, E. and Miah, M. (2019) 'Effect of post-processing on the dimensional accuracy of small plastic additive manufactured parts'. Rapid Prototyping Journal, 25 (1). pp. 1 - 12. ISSN: 1355-2546 Open Access Link
Wu, C., Chen, S., Xiao, C., Cheng, K. and Ding, H. (2019) 'Longitudinal–torsional ultrasonic vibration-assisted side milling process'. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 233 (10). pp. 3356 - 3363. ISSN: 0954-4062
Khaghani, A. and Cheng, K. (2019) 'CFD-based design and analysis of air-bearing-supported paint spray spindle'. Nami Jishu yu Jingmi Gongcheng/Nanotechnology and Precision Engineering, 1 (4). pp. 226 - 235. ISSN: 1672-6030 Open Access Link
Huang, Z., Angadi, VC., Danishvar, M., Mousavi, A. and Li, M. (2019) 'Zero Defect Manufacturing of Microsemiconductors - An Application of Machine Learning and Artificial Intelligence'.5th International Conference on Systems and Informatics, ICSAI 2018. Nanjing, China. 3 - 12 November. IEEE. pp. 449 - 454. ISSN: 2474-0217
Vignjevic, R., Djordjevic, N., De Vuyst, T., Appleby-Thomas, G., Wasilczuk, A. and Meo, M. (2019) 'Response of carbon fibre reinforced polymers to high velocity impact'.12th International Conference on Composite Science and Technology. Sorrento, Italy.