Werner, JC., Kalganova, T. and Fogarty, TC. (Accepted) 'Artificial intelligence applied to transport rescheduling and optimisation.'. .

Kalganova, T., Miller, J. and Fogarty, T. (Accepted) 'Some Aspects of an Evolvable Hardware Approach for Multiple-Valued Combinational Circuit Design'. Proc. of Second International Conference on Evolvable System: From Biology to Hardware (ICES'98).

Werner, JC. and Kalganova, T. (Accepted) 'Global problem solver for Combinatorial Problems'. .

Akyürek, E., Kalganova, T., Mukhtar, M., Paramonov, L. and Steele, L. (Accepted) 'Design and Development of Low Cost 3D Printed Ambidextrous Robotic Hand Driven by Pneumatic Muscles'. .

Sawangsri, W. and Cheng, K. (2014) 'An innovative approach to cutting force modelling in diamond turning and its correlation analysis with tool wear'. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 230 (3). pp. 405 - 415. ISSN: 0954-4054

Vignjevic, R., Hughes, K., De Vuyst, T., Djordjevic, N., Campbell, JC., Stojkovic, M., Gulavani, O. and Hiermaier, S. et al. (2014) 'Lagrangian analysis led design of a shock recovery plate impact experiment'. International Journal of Impact Engineering, 77. pp. 16 - 29. ISSN: 0734-743X Open Access Link

Faragasso, A., Stilli, A., Bimbo, J., Noh, Y., Liu, H., Nanayakkara, T., Dasgupta, P., Wurdemann, HA. and Althoefer, K. et al. (2014) 'Endoscopic add-on stiffness probe for real-time soft surface characterisation in MIS'.2014 36th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC). Chicago, IL. 2 - 30 August. IEEE. pp. 6517 - 6520. ISSN: 1557-170X

Noh, Y., Secco, EL., Sareh, S., Wurdemann, H., Faragasso, A., Back, J., Liu, H., Sklar, E. and Althoefer, K. et al. (2014) 'A continuum body force sensor designed for flexible surgical robotics devices'.2014 36th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC). Chicago, IL. 2 - 30 August. IEEE. pp. 3711 - 3714. ISSN: 1557-170X

Scamans, G. (2014) 'Cosmetic corrosion of aluminum automotive closure sheet'. Light Metal Age, 72 (6). pp. 6 - 12. ISSN: 0024-3345

Zhou, X., Dong, W. and Oladiran, O. (2014) 'Experimental and Numerical Assessment of Restrained Shrinkage Cracking of Concrete Using Elliptical Ring Specimens'. Journal of Materials in Civil Engineering, 26 (11). pp. 04014087-1 - 04014087-8. ISSN: 0899-1561

Choi, Y. (2014) 'Measuring social values of design in the commercial sector'. Place of publication: Brunel University London.Open Access Link

Fang, C., Li, W-F., Koster, RS., Klimeš, J., van Blaaderen, A. and van Huis, MA. (2014) 'The accurate calculation of the band gap of liquid water by means of GW corrections applied to plane-wave density functional theory molecular dynamics simulations'. Physical Chemistry Chemical Physics, 17 (1). pp. 365 - 375. ISSN: 1463-9076 Open Access Link

Zhou, X. and Rong, H. (2014) 'Characterization of Rheology of Fresh Cement-based Materials for Extrusion via Direct Shear Test'.2nd International Conference on Advances in Civil, Structural and Environmental Engineering. Zurich, Switzerland. 25 - 26 October. Institute of Research Engineers and Doctors. pp. 200 - 205.

Zhang, R., Xu, Y., Harrison, D., Fyson, J., Southee, D. and Tanwilaisiri, A. (2014) 'Fabrication and characterisation of energy storage fibres'.2014 20th International Conference on Automation and Computing (ICAC). Institute of Electrical and Electronics Engineers Inc.. pp. 228 - 230.Open Access Link

Ji, H., Xia, F. and Cheng, K. (2014) 'Engineering drawing man-hour forecasting based on BP-GA in design of chemical equipment'. ICAC 2014 - Proceedings of the 20th International Conference on Automation and Computing: Future Automation, Computing and Manufacturing, 22. pp. 206 - 211.

Lau, ET., Yang, Q., Taylor, GA., Forbes, AB., Wright, P. and Livina, VN. (2014) 'Optimization of carbon emissions in smart grids'.2014 49th International Universities Power Engineering Conference (UPEC). ClujNapoca, ROMANIA. 22 - 5 September. IEEE. pp. 1 - 4.

Akyürek, E., Kalganova, T., Mukhtar, M., Paramonov, L., Steele, L., Simko, M., Kavanagh, L., Nimmo, A., Huynh, A. and Stelarc. et al. (2014) 'Design and Development of Low Cost 3D Printed Ambidextrous Robotic Hand Driven by Pneumatic Muscles'. International Journal of Engineering & Technical Research. pp. 179 - 188.Open Access Link

Dong, W., Zhou, X. and Wu, Z. (2014) 'A Fracture Mechanics-based Method for Prediction of Cracking of Circular and Elliptical Concrete Rings under Restrained Shrinkage'. Engineering Fracture Mechanics, 131. pp. 687 - 701. ISSN: 1873-7315 Open Access Link

Yang, W., Ji, S., Wang, M. and Li, Z. (2014) 'Precipitation behaviour of Al-Zn-Mg-Cu alloy and diffraction analysis from η′ precipitates in four variants'. Journal of Alloys and Compounds, 610. pp. 623 - 629. ISSN: 0925-8388 Open Access Link

Macredie, R., Kim, H. and Giacomin, J. (2014) 'A qualitative study of stakeholders' perspectives on the social network service environment'. International Journal of Human-Computer Interaction, 30 (12). pp. 965 - 976. ISSN: 1044-7318 Open Access Link

Cardoso, RP. and Cesar de Sa, JMA. (2014) 'Blending moving least squares techniques with NURBS basis functions for nonlinear isogeometric analysis'. Computational Mechanics, 53. pp. 1327 - 1340. ISSN: 1432-0924

Balart, MJ. and Fan, Z. (2014) 'Surface oxidation of molten AZ31, AM60B and AJ62 magnesium alloys in air'. International Journal of Cast Metals Research, 27 (5). pp. 301 - 311. ISSN: 1364-0461

Chen, X., Cheng, K. and Wang, C. (2014) 'Design of a smart turning tool with application to in-process cutting force measurement in ultraprecision and micro cutting'. Manufacturing Letters, 2 (4). pp. 112 - 117. ISSN: 2213-8463 Open Access Link

Zhang, J., Liu, X., Vezzoli, C. and Ceschin, F. (2014) 'LeNS China: A Chinese Learning Network on Sustainability for the development and diffusion of teaching materials and tools on design for sustainability'. Ecological Economy, 10 (2). pp. 130 - 143. ISSN: 1673-0178

Liu, D., Liu, Y., Huang, Y., Song, R. and Chen, M. (2014) 'Effects of solidification cooling rate on the corrosion resistance of Mg-Zn-Ca alloy'. Progress in Natural Science: Materials International, 24 (5). pp. 452 - 457. ISSN: 1002-0071 Open Access Link

Kotadia, HR., Patel, JB., Li, HT., Gao, F. and Fan, Z. (2014) 'Microstructure evolution in melt conditioned direct chill (MC-DC) casting of Fe-rich al-alloy'.AMI Light Metals Conference 2014. Pilanesberg National Park, South Africa. 1 - 17 October. Trans Tech Publications, Ltd.. pp. 90 - 95. ISSN: 1022-6680 Open Access Link

Tirumalasetty, GK., Fang, CM., Jansen, J., Yokosawa, T., Boeije, MFJ., Sietsma, J., Van Huis, MA. and Zandbergen, HW. et al. (2014) 'Structural tale of two novel (Cr, Mn)C carbides in steel'. Acta Materialia, 78. pp. 161 - 172. ISSN: 1359-6454

Sheng, B., Zhou, W., Yu, J., Meng, S., Zhou, C. and Hepburn, DM. (2014) 'On-line PD detection and localization in cross-bonded HV cable systems'. IEEE Transactions on Dielectrics and Electrical Insulation, 21 (5). pp. 2217 - 2224. ISSN: 1070-9878

Lin, C., Ji, J., Tao, Y., Huo, D., Cai, L. and Cheng, K. (2014) 'Structural design and control strategy analysis of micro/nano transmission platform'. Transactions of Nanjing University of Aeronautics and Astronautics, 31 (5). pp. 484 - 491. ISSN: 1005-1120

Zhou, L. and Lu, KJ. (2014) 'Detecting Communities with Different Sizes for Social Network Analysis'. The Computer Journal, 58 (9). pp. 1894 - 1908. ISSN: 0010-4620 Open Access Link

Faragasso, A., Bimbo, J., Noh, Y., Jiang, A., Sareh, S., Liu, H., Nanayakkara, T., Wurdemann, HA. and Althoefer, K. et al. (2014) 'Novel uniaxial force sensor based on visual information for minimally invasive surgery'.2014 IEEE International Conference on Robotics and Automation (ICRA). Hong Kong, PEOPLES R CHINA. 22 - 7 June. IEEE. pp. 1405 - 1410. ISSN: 1050-4729

Sareh, S., Jiang, A., Faragasso, A., Noh, Y., Nanayakkara, T., Dasgupta, P., Seneviratne, LD., Wurdemann, HA. and Althoefer, K. et al. (2014) 'Bio-inspired tactile sensor sleeve for surgical soft manipulators'.2014 IEEE International Conference on Robotics and Automation (ICRA). Hong Kong, PEOPLES R CHINA. 22 - 7 June. IEEE. pp. 1454 - 1459. ISSN: 1050-4729

Noh, Y., Sareh, S., Back, J., Wurdemann, HA., Ranzani, T., Secco, EL., Faragasso, A., Liu, H. and Althoefer, K. et al. (2014) 'A three-Axial body force sensor for flexible manipulators'.2014 IEEE International Conference on Robotics and Automation (ICRA). Hong Kong, PEOPLES R CHINA. 22 - 7 June. IEEE. pp. 6388 - 6393. ISSN: 1050-4729

Back, J., Bimbo, J., Noh, Y., Seneviratne, L., Althoefer, K. and Liu, H. (2014) 'Control a contact sensing finger for surface haptic exploration'.2014 IEEE International Conference on Robotics and Automation (ICRA). Hong Kong, PEOPLES R CHINA. 22 - 7 June. IEEE. pp. 2736 - 2741. ISSN: 1050-4729

Chang, I. and Peng, T. (2014) 'A Novel Method to Homogenously Disperse Carbon Nanotubes in Aluminum Powders'.Euro PM2014 Congress. Salzburg. 21 - 24 September. Conference Proceedings.

Wang, G., Dargusch, MC., Qian, M., Eskin, D. and StJohn, DH. (2014) 'The role of ultrasonic treatment in refining the as-cast grain structureduring the solidification of an Al–2Cu alloy'. Journal of Crystal Growth, 408 (1). pp. 119 - 124. ISSN: 0022-0248 Open Access Link

Macredie, R., Koulouri, T. and Lauria, S. (2014) 'Do (and say) as I say: Linguistic adaptation in human-computer dialogues'. Human-Computer Interaction, 31 (1). pp. 59 - 95. ISSN: 0737-0024 Open Access Link

Zhou, X., Oladiran, O. and Dong, W. (2014) 'A New Method for Assessment of Cracking Tendency of Cement-based Materials under Restrained Shrinkage'.34th Annual Cement and Concrete Science Conference. Sheffield, United Kingdom. 14 - 17 September. Proceedings of the 34th Annual Cement and Concrete Science Conference. pp. 473 - 476.

Zhou, X. and Safari, S. (2014) 'Early-age Engineering Properties and Electrical Resistivity of Geopolymer Mortars'.34th Annual Cement and Concrete Science Conference. Sheffield, United Kingdom. 14 - 17 September. Proceedings of the 34th Annual Cement and Concrete Science Conference. pp. 471 - 471.

Zhou, X. and Li, Z. (2014) 'Manufacturing Cement-based Materials and Building Products via Extrusion'.34th Annual Cement and Concrete Science Conference. Sheffield, United Kingdom. 14 - 17 September. Proceedings of the 34th Annual Cement and Concrete Science Conference. pp. 45 - 48.

Hughes, K., Vignjevic, R. and Corcoran, F. (2014) 'Using ANSYS LS-DYNA for Simulation led design of tablet protective covers'.1st CADFEM Ireland Users’ Meeting & ANSYS Regional Conference. Engineers Ireland, Dublin. 11 - 12 September. CADFEM Ireland Ltd.

Nyamu, J. and De Coster, R. (2014) 'Co-innovation: the future of telemedicine in developing countries'.British Academy of Management (BAM) Doctoral Symposium 2014. University of Ulster Business School, Belfast. 8Open Access Link

Nowak, M., Bolzoni, L. and Nadendla, HB. (2014) 'Grain refinement of Al-Si alloys by Nb-B inoculation. Part I: concept development and effect on binary alloys'. Materials and Design, 66 (PA). pp. 366 - 375. ISSN: 1873-4197 Open Access Link

Bolzoni, L., Nowak, K. and Nadendla, HB. (2014) 'Grain refinement of Al-Si alloys by Nb-B inoculation. Part II: application to commercial alloys'. Materials and Design, 66, Part A, (5 February 2015). pp. 376 - 383. ISSN: 1873-4197 Open Access Link

Zhou, X., Dong, W., Oladiran, O., Wu, Z. and Kastiukas, G. (2014) 'Numerical and Experimental Assessment of the Effects of Specimen Size on Shrinkage Cracking of Concrete'.Twelfth International Conference on Computational Structures Technology. Naples, Italy. 2 - 5 September. Civil-Comp Press. pp. 1 - 20. ISSN: 1759-3433

Tarhini, A., Hone, K. and Liu, X. (2014) 'Measuring the moderating effect of gender and age on E-learning acceptance in England: A structural equation modeling approach for an extended Technology Acceptance Model'. Journal of Educational Computing Research, 51 (2). pp. 163 - 184. ISSN: 0735-6331

Sayad Saravi, S., Cheng, K., Chong, TP. and Vathylakis, A. (2014) 'Design of serrate-semi-circular riblets with application to skin friction reduction on engineering surface'. International Journal of Flow Control, 6 (3). pp. 83 - 92. ISSN: 1756-8250 Open Access Link

Gulavani, O., Hughes, K. and Vignjevic, R. (2014) 'Explicit dynamic formulation to demonstrate compliance against quasi-static aircraft seat certification loads (CS25.561) -Part I: Influence of time and mass scaling'. Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, 228 (11). pp. 1982 - 1995. ISSN: 0954-4100

Ceschin, F., Resta, B., Vezzoli, C. and Gaiardelli, P. (2014) 'Visualising product-service system business models'.19th DMI: Academic Design Management Conference. London. 1 - 4 September. Design Management Institute. pp. 2123 - 2152.Open Access Link

Mohimi, A., Gan, TH. and Balachandran, W. (2014) 'Development of high temperature ultrasonic guided wave transducer for continuous in service monitoring of steam lines using non-stoichiometric lithium niobate piezoelectric ceramic'. Elsevier BV. pp. 432 - 442. ISSN: 0924-4247

Rohan, E., Shaw, S. and Whiteman, JR. (2014) 'Erratum to Poro-viscoelasticity modelling based on upscaling quasistatic fluid-saturated solids [Computational Geosciences (2013), 10.1007/s10596-013-9363-1]'. Computational Geosciences, 18 (5). pp. 897 - 898. ISSN: 1420-0597