IMM
Green, S., Page, F., De’Ath, P., Pei, E. and Lam, B. (2019) 'VUCA challenges on the design-engineering student spectrum'. Proceedings of the 21st International Conference on Engineering and Product Design Education: Towards a New Innovation Landscape, E and PDE 2019.
Wang, G., Wang, Q., Balasubramani, N., Qian, M., Eskin, D., Dargusch, MS. and et al. (2019) 'The role of ultrasonically induced acoustic streaming in developing fine equiaxed grains during the solidification of an Al-2% Cu alloy'. Metallurgical and Materials Transactions A, 50 (11). pp. 5253 - 5263. ISSN: 1543-1940 Open Access Link
Fang, C. and Fan, Z. (2019) 'Prenucleation at the liquid-Al/α-Al2O3 and the liquid-Al/MgO interfaces'. Computational Materials Science, 171 (January 2020). pp. 1 - 8. ISSN: 0927-0256 Open Access Link
McCarthy, RR., Ullah, MW., Booth, P., Pei, E. and Yang, G. (2019) 'The use of bacterial polysaccharides in bioprinting'. Biotechnology Advances, 37 (8). pp. 1 - 14. ISSN: 0734-9750 Open Access Link
Kim, J-H., Choi, K-S., Lacagnina, G., Joseph, P., Hasheminejad, SM., Chong, TP., et al. (2019) 'Optimization of leading-edge undulation of a NACA 65(12)-10 aerofoil for noise reduction and aerodynamic enhancement'.23rd International Congress on Acoustics. Aachen, Germany. 9 - 13 September. Proceedings of the 23rd International Congress on Acoustics : integrating 4th EAA Euroregio 2019. pp. 5351 - 5358. ISSN: 2226-7808 Open Access Link
Schroeder, E., Chong, TP., Kamruzzaman, M., Hurault, J. and Joseph, P. (2019) 'Aerofoil trailing edge self-noise reduction by Surface Mounted Attenuation Devices'.23rd International Congress on Acoustics : integrating 4th EAA Euroregio 2019. Aachen, Germany. 9 - 13 September. Proceedings of the International Congress on Acoustics. pp. 5327 - 5334. ISSN: 2226-7808 Open Access Link
Balezdrova, N., Choi, Y. and Lam, B. (2019) '‘Invisible Minorities’: Exploring Improvement Strategies for Social Care Services aimed at Elderly Immigrants in the UK using Co-Design Methods'.IASDR. Manchester. 5 - 5 September.Open Access Link
Sarsembayev, B., Kalganova, T., Kaibaldiyev, A., Duc Do, T. and Zhetpissov, Y. (2019) 'Sliding Mode Control with High-Order Disturbance Observer Design for Disturbance Estimation in SPMSM'.2019 International Conference on System Science and Engineering (ICSSE). Dong Hoi, Vietnam, Vietnam. 5 - 21 July. IEEE. pp. 531 - 536. ISSN: 2325-0925 Open Access Link
Qian, P., Tian, X., Kanfoud, J., Lee, JLY. and Gan, TH. (2019) 'A novel condition monitoring method of wind turbines based on long short-term memory neural network'. Energies, 12 (18). pp. 1 - 15.Open Access Link
Volhard, M., den Engelsen, D., Fern, GR., Ireland, TG. and Silver, J. (2019) 'Crystal structure, photoluminescence and cathodoluminescence of Ba1-xCaxAl2O4 doped with Eu2+'. Optical Materials Express, 9 (10). pp. 3895 - 3910. ISSN: 2159-3930 Open Access Link
Ceschin, F. and Gaziulusoy, İ. (2019) 'Design for Sustainability: A Multi-level Framework from Products to Socio-technical Systems'. Abingdon, Oxon: Routledge. ISSN 10: 0429851952 ISSN 13: 9780429851957 Open Access Link
Green, S., Page, F., De’Ath, P., Pei, E. and Lam, B. (2019) 'VUCA challenges on the design-engineering student spectrum'.21st International Conference on Engineering and Product Design Education. Glasgow, Scotland. 1 - 13 September. The Design Society.Open Access Link
Zhang, T., Gao, F., Martin, H. and Jiang, X. (2019) 'A method for inspecting near-right-angle V-groove surfaces based on dual-probe wavelength scanning interferometry'. International Journal of Advanced Manufacturing Technology, 104 (1-4). pp. 1 - 7. ISSN: 0268-3768
Guo, R., Xue, H., Wang, S. and Wang, B. (2019) 'The morphology changes of indentations in press-in tests of SS304 under tensile stress'. International Journal of Offshore and Polar Engineering, 29 (3). pp. 322 - 328. ISSN: 1053-5381 Open Access Link
Cheng, K., Shao, Y., Jadva, M. and Bodenhorst, R. (2019) 'Development of the improved Preston equation for abrasive flow machining of aerofoil structures and components'. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 233 (9). pp. 1397 - 1404. ISSN: 1350-6501
Fresneda-Portillo, C. and Mikhailov, SE. (2019) 'Analysis of Boundary-Domain Integral Equations to the Mixed BVP for a Compressible Stokes System with Variable Viscosity'. Communications on Pure and Applied Analysis, 18 (6). pp. 3059 - 3088. ISSN: 1534-0392 Open Access Link
Zhou, M., Jiang, L., Chen, S., Usmani, A. and Cardoso, RP. (2019) 'Residual Fire Resistance of Steel Frames Following Moderate Earthquake - A Case Study'. Journal of Constructional Steel Research. ISSN: 0143-974X Open Access Link
Tamanna, N., Kabir, IR. and Naher, S. (2019) 'A numerical investigation of similar and dissimilar clad materials on H13 steel substrate in the Laser Cladding process'. Advances in Materials and Processing Technologies, 5 (4). pp. 598 - 606. ISSN: 2374-068X
Al-Helal, KW., Lazaro-Nebreda, J., Patel, JB., Scamans, GM. and Fan, Z. (2019) 'Melt conditioned direct chill (MC-DC) casting of AA-6111 aluminium alloy formulated from incinerator bottom ash (IBA)'. Recycling, 4 (3). pp. 1 - 9. ISSN: 2313-4321 Open Access Link
Lebon, B., Li, H-T., Patel, J., Assadi, H. and Fan, Z. (2019) 'Numerical modelling of melt-conditioned direct-chill casting'. Applied Mathematical Modelling, 77 (2). pp. 1310 - 1330. ISSN: 0307-904X Open Access Link
Huang, Y., Swash, MR. and Boulgouris, NV. (2019) 'Glasses-Free Led Holoscopic 3D Wall with Effective Pixel Mapping'.2019 IEEE International Conference on Image Processing (ICIP). Taipei, TAIWAN. 26 - 25 September. IEEE. pp. 499 - 503. ISSN: 1522-4880
Shan, K., Szabo, I., Chong, A., Kanfoud, J. and Gan, T-H. (2019) 'Robotic Digital X-ray Scanning System for Deep Water Flexible Riser Inspection'.International Conference on Manufacturing Research, Incorporating the 34th National Conference on Manufacturing Research. Belfast, UK. 22 - 12 September. IOS Press. pp. 135 - 140. ISSN: 2352-751X Open Access Link
Grant, S. (Accepted) 'KNOWNET: Exploring Interactive Knowledge Networking across Insurance Supply Chains'. International Journal of Production Management and Engineering, 2 (1). pp. 7 - 7.
Yao, W., Xia, M., Zeng, L., Ge, X., Qian, M., Wang, Y., et al. (2019)
'Atomic Structural Competition in the Al
Rabi, M., Cashell, KA. and Shamass, R. (2019) 'Flexural analysis and design of stainless steel reinforced concrete beams'. Engineering Structures, 198. pp. 109432 - 109432. ISSN: 0141-0296 Open Access Link
He, Y., Yuan, Z., Cheng, K., Duan, Z. and Zhao, W. (2019) 'Development of electrical enhanced photocatalysis polishing slurry for silicon carbide wafer'. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 234 (3). pp. 401 - 413. ISSN: 1350-6501
Liu, G., Blake, P. and Ji, S. (2019) 'Effect of Zr on the high cycle fatigue and mechanical properties of Al–Si–Cu–Mg alloys at elevated temperatures'. Journal of Alloys and Compounds, 809. pp. 1 - 14. ISSN: 0925-8388 Open Access Link
Balart, M., Gao, F., Patel, J. and Miani, F. (2019) 'Effects of Superheat and Solute Additions on the Grain Size in Binary Copper Alloys.'. Metallography, Microstructure, and Analysis, 8 (4). pp. 566 - 572. ISSN: 2192-9270 Open Access Link
Kalganova, T. and Limlahapun, R. (2019) 'Influence of Technology in The Hospitality Industry'. Journal of MCU Peace Studies, 7 (5). pp. 1203 - 1213. ISSN: 2539-6765 Open Access Link
Lau, ET., Sun, L. and Yang, Q. (2019) 'Modelling, prediction and classification of student academic performance using artificial neural networks'. SN Applied Sciences, 1 (982). ISSN: 2523-3963 Open Access Link
Li, L., Zhang, H., Zhou, X., Chen, M., Lu, L. and Cheng, X. (2019) 'Effects of super absorbent polymer on scouring resistance and water retention performance of soil for growing plants in ecological concrete'. Ecological Engineering, 138 (November 2019). pp. 237 - 247. ISSN: 0925-8574
Fern, GR., Hobson, PR., Metcalfe, A. and Smith, DR. (2019) 'Performance of four CVD diamond radiation sensors at high temperature'. Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, 958. pp. 1 - 4. ISSN: 0168-9002 Open Access Link
Haghayeghi, R., Ezzatneshan, E. and Bahai, H. (2019) 'Corrigendum to “Experimental–numerical study of AA5754 microstructural evolution under electromagnetic ultrasonic merged fields” [J. Mater. Process. Technol. 225 (November 2015) 103–109] (Journal of Materials Processing Tech. (2015) 225 (103–109), (S0924013615300091), (10.1016/j.jmatprotec.2015.05.029))'. Journal of Materials Processing Technology, 270. pp. 380. ISSN: 0924-0136
Gao, S., Shi, Y., Xu, L., Chen, H. and Cheng, K. (2019) 'Investigation on influences of herringbone grooves for the aerostatic journal bearings applied to ultra-high-speed spindles'. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 233 (16). pp. 5795 - 5812. ISSN: 0954-4062
Weber, M., Giacomin, J., Malizia, A., Skrypchuk, L., Gkatzidou, V. and Mouzakitis, A. (2019) 'Investigation of the dependency of the drivers’ emotional experience on different road types and driving conditions'. Transportation Research Part F: Traffic Psychology and Behaviour, 65. pp. 107 - 120. ISSN: 1369-8478 Open Access Link
WANG, JY., FANG, JH., YANG, HL., LIU, ZL., LI, RD., JI, SX., et al. (2019)
'Mechanical properties and wear resistance of medium entropy Fe
Seidl, M., De Vuyst, T. and Djordjevic, N. (2019) 'Numerical investigations on 7.62x39 mm projectile ricochet off aramid plate'.Light Weight Armour for Defence and Security. Roubaix, France. 26 - 9 October.
Vignjevic, R., Liang, C., Hughes, K., Brown, J., De Vuyst, T., Djordjevic, N. and et al. (2019) 'A numerical study on the influence of internal corrugated reinforcements on the biaxial bending collapse of thin-walled beams'. Thin-Walled Structures, 144 (November 2019). pp. 106277 - 106277. ISSN: 0263-8231 Open Access Link
Koh, JHB., Jeong, T., Han, S., Li, W., Rhode, K. and Noh, Y. (2019) 'Optoelectronic Sensor-based Shape Sensing Approach for Flexible Manipulators'.41st International Engineering in Medicine and Biology Conference (EMBC 2019). Berlin, Germany. 23 - 27 July. IEEE. pp. 3199 - 3203. ISSN: 1557-170X Open Access Link
Gomez, A., Schmitz, C., Henningsson, M., Housden, JR., Noh, Y., Zimmer, V., et al. (2019) 'Mechanically Powered Motion Imaging Phantoms: Proof of Concept'.41st International Engineering in Medicine and Biology Conference (EMBC 2019). Berlin Germany. 23 - 27 July. IEEE. pp. 2723 - 2726. ISSN: 1557-170X Open Access Link
Farrahi, GH., Minaii, K. and Bahai, H. (2019) 'Fretting fatigue behavior of 316L stainless steel under combined loading conditions'. International Journal of Fatigue, 128. pp. 1 - 10. ISSN: 0142-1123
Mikhailov, SE., Musolino, P. and Orlik, J. (2019) 'Rescaling and trace operators in fractional Sobolev spaces on bounded Lipschitz domains with periodic structure', in Constanda, C. and Harris, P. (eds.) Integral Methods in Science and Engineering. Analytic Treatment and Numerical Approximations.. Cham, Switzerland : Springer Nature Switzerland AG. pp. 237 - 251. ISBN 13: 978-3-030-16076-0. Open Access Link
Mikhailov, SE., Musolino, P. and Orlik, J. (2019) 'Rescaling and Trace Operators in Fractional Sobolev Spaces on Bounded Lipschitz Domains with Periodic Structure', in Constanda, C. and Harris, P. (eds.) Integral Methods in Science and Engineering: Analytic Treatment and Numerical Approximations. Cham : Birkhäuser. pp. 237 - 251. ISBN 10: 3-030-16077-7. ISBN 13: 978-3-030-16076-0.
Liu, W., Wang, Z., Yuan, Y., Zeng, N., Hone, K. and Liu, X. (2019) 'A Novel Sigmoid-Function-Based Adaptive Weighted Particle Swarm Optimizer'. IEEE Transactions on Cybernetics, 51 (2). pp. 1085 - 1093. ISSN: 2168-2267 Open Access Link
Khaghani, A. and Cheng, K. (2019) 'Investigation on multi-body dynamics based approach to the toolpath generation for ultraprecision machining of freeform surfaces'. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 234 (3). pp. 571 - 583. ISSN: 0954-4054
Wang, S., Housden, J., Noh, Y. and Rhode, K. (2019) 'Robotic-Assisted Ultrasound for Fetal Imaging: Evolution from Single-Arm to Dual-Arm System'.Annual Conference Towards Autonomous Robotic Systems. London, UK. 17 - 18 July. Springer International Publishing. pp. 27 - 38. ISSN: 0302-9743
Kumar, H., Lambert, JW., Nageswaran, C., Nadendla, HB. and Gan, TH. (2019) 'Towards a viable field deployable ultrasonic technique for detection of type IV creep damage in CSEF steels at an early stage'.ASME 2019 Pressure Vessels & Piping Conference. San Antonio, TX. USA. 14 - 19 July. American Society of Mechanical Engineers. ISSN: 0277-027X
Lu, KJ. (2019) 'Appeal difference between frequent and rare tourists'.Academy of Marketing Science World Marketing Congress. Edinburgh. 12 - 12 July.Open Access Link
Wang, J., Yang, H., Huang, H., Ruan, J. and Ji, S. (2019) 'Microstructure and mechanical properties of SiC whisker reinforced CoCrNi medium entropy alloys'. Materials Letters, 254 (1 November 2019). pp. 77 - 80. ISSN: 0167-577X Open Access Link
De Vuyst, T., Vignjevic, R., Campbell, J., Djordjevic, N. and Hughes, K. (2019) 'Application of SPH to solid mechanics problems'.UK Fluids Network Special Interest Group - 4th Meeting. National Structural Integrity Research Centre (NSIRC), Granta Park, Cambridge.Open Access Link
Merhi, M., Hone, K. and Tarhini, A. (2019) 'A cross-cultural study of the intention to use mobile banking between Lebanese and British consumers: Extending UTAUT2 with security, privacy and trust'. Technology in Society, 59. pp. 101151 - 101151. ISSN: 0160-791X Open Access Link