IMM
Fan, Z., Tsakiropoulos, P. and Miodownik, AP. (1994) 'A generalized law of mixtures'. Journal of Materials Science, 29 (1). pp. 141 - 150. ISSN: 0022-2461
Fan, Z., Miodownik, AP., Chandrasekaran, L. and Ward-Close, M. (1994) 'The Young's moduli of in situ Ti/TiB composites obtained by rapid solidification processing'. Journal of Materials Science, 29 (4). pp. 1127 - 1134. ISSN: 0022-2461
Yu, TX., Reid, SR. and Wang, B. (1993) 'Hardening softening behavior of tubular cantilever beams'.Asia / Pacific symposium on advances in engineering plasticity and its applications. HONG KONG POLYTECH, HONG KONG, HONG KONG. Elsevier BV. pp. 1021 - 1033. ISSN: 0020-7403
Vignjevic, R., Kecman, D. and Sadeghi, MM. (1993) 'Improved compound beam element with non-linear moment-rotation curves for the car side impact and roof crush analysis using DYNA3D program'. American Society of Mechanical Engineers, Applied Mechanics Division, AMD. pp. 31 - 46. ISSN: 0160-8835
Fan, Z., Miodownik, AP. and Tsakiropoulos, P. (1993) 'Microstructural characterisation of two phase materials'. Materials Science and Technology (United Kingdom), 9 (12). pp. 1094 - 1100. ISSN: 0267-0836
Fan, Z. (1993) 'On the young's moduli of Ti6Al4V alloys'. Scripta Metallurgica et Materiala, 29 (11). pp. 1427 - 1432. ISSN: 0956-716X
Wang, B., Reid, SR. and Yu, TX. (1993) 'Dynamic failure mechanisms of bent pipes under out-of-plane end loading: on the design safety of high pressure piping systems'. American Society of Mechanical Engineers (Paper). pp. 1 - 8. ISSN: 0402-1215
Fang, CM., Meetsma, A., Wiegers, GA. and Boom, G. (1993)
'Synthesis and crystal structure of F-type erbium sesquisulfide, F-ER
Fan, Z., Tsakiropoulos, P. and Miodownik, AP. (1993) 'Yield strength of two ductile phase alloys'. Materials Science and Technology (United Kingdom), 9 (10). pp. 863 - 868. ISSN: 0267-0836
Baber, C. and Hone, KS. (1993) 'Modelling error recovery and repair in automatic speech recognition'. International Journal of Man-Machine Studies, 39 (3). pp. 495 - 515. ISSN: 0020-7373
Chang, ITH. and Cantor, B. (1993) 'Microstructure of pulsed laser irradiated Sn and Ge-50 at.%Sn thin films on Ge single crystal substrates'. Thin Solid Films, 230 (2). pp. 167 - 178. ISSN: 0040-6090
Fang, C., Meetsma, A. and Wiegers, GA. (1993) 'Synthesis and Crystal Structure of Er2S3'.XVI IUCr Congress. Beijing, China. 1 - 29 August. International Union of Crystallography (IUCr). pp. c253 - c253. ISSN: 0906-1975 Open Access Link
Bonser, RHC. and Witter, MS. (1993) 'Indentation hardness of the bill keratin of the European starling'. Condor, 95 (3). pp. 736 - 738. ISSN: 0010-5422
Ji, S. (1993) 'Reclamation of ester hardened Phenolic sand (in Chinese)'. Foundry Engineering, 1993 (3). pp. 23 - 29. ISSN: 1673-3320
Ji, S. and Yang, G. (1993) 'Comprehensive classifying and coding system for castings (in Chinese)'. China Foundry Machinery, 1993 (2). pp. 18 - 21. ISSN: 1006-9658
Fan, Z. and Miodownik, AP. (1993) 'An empirical approach to strain to fracture of two-ductile-phase alloys'. Scripta Metallurgica et Materiala, 28 (8). pp. 895 - 900. ISSN: 0956-716X
Huang, Y. and Ma, L. (1993) 'Diffusion bonding of superplastic Al alloy LC4'. Acta Metallurgica Sinica Series B, Process Metallurgy & Miscellaneous, 6 B (2). pp. 116 - 121. ISSN: 1000-9450
Ji, S. and Gao, J. (1993) 'Research progress of gas-hardened chemical binder core-making techniques (in Chinese)'. Foundry Engineering, 1993 (2). pp. 35 - 40. ISSN: 1673-3320
Yang, Q. and Butler, C. (Accepted) '3D Contact displacement probe'.
Harrison, D. and Norton, M. (1993) 'The use and limitations of performance indicators - Annex C'.
Lawrie, JB., Abrahams, ID. and Linton, CM. (1993) 'Acoustic radiation from two opposed semi-infinite coaxial cylindrical waveguides. I: overlapping edges'. Wave Motion, 18 (2). pp. 121 - 142. ISSN: 0165-2125
Stolworthy, C. and Rees, DWA. (1993) 'Biaxial flow and fracture in a metal matrix composite'. Key Engineering Materials: Engineered Materials, 86-87. pp. 77 - 84. ISSN: 1662-9795
Rees, DWA. (1993) 'Anisotropic plastic-flow and instability', in Wilshire, B. and Evans, RW. (eds.) Creep and Fracture of Engineering Materials and Structures. INST MATERIALS. pp. 641 - 649. ISBN 10: 0-901716-43-X.
Butler, C. and Yang, Q. (1993) 'A fibre-optic 3-D analog probe for component scanning on coordinate-measuring machines'.EUROSENSORS 6. SAN SEBASTIAN, SPAIN. 1 - 7 October. Elsevier BV. pp. 473 - 479. ISSN: 0924-4247
Harrison, D. and Norton, M. (1993) 'Peer review and options for improvement - Annex B'.
Harrison, D., Jaques, M. and Strickland, P. (1993) 'Design by manufacture simulation using a glove input', in Warwick, K., Gray, J. and Roberts, D. (eds.) Virtual reality in engineering. Stevenage, UK : Institution of Electrical Engineers. pp. 91 - 103. ISBN 10: 0-85296-803-5.
Kaplunov, JD., Nolde, EV. and Goldenveizer, AL. (1993) 'On Timoshenko-Reissner type theories of plates and shells'. International Journal of Solids and Structures, 30 (5). pp. 675 - 694. ISSN: 0020-7683
Eskin, D., Fedotov, S. and Toropova, LS. (1993) 'Mechanical and elastic properties of deformed binary aluminum alloys containing 10-20 vol.% of second phase'. Izvestiya Akademii Nauk SSSR. Metally. pp. 144 - 150. ISSN: 0568-5303
ESKIN, DG., TOROPOVA, LS. and FEDOTOV, SG. (1993) 'TENSILE AND ELASTIC PROPERTIES OF DEFORMED BINARY ALUMINUM-ALLOYS WITH 10-20 VOL-PERCENT OF 2ND-PHASE'. RUSSIAN METALLURGY. pp. 122 - 127. ISSN: 0036-0295
HONE, KS. and BABER, C. (1993) 'USING TASK NETWORKS TO MODEL ERROR-CORRECTION DIALOGS FOR AUTOMATIC SPEECH RECOGNITION'.1993 ANNUAL CONF OF THE ERGONOMICS SOC : ERGONOMICS AND ENERGY. EDINBURGH, SCOTLAND. 1 - 16 April. TAYLOR & FRANCIS LTD. pp. 152 - 157.
Fan, Z., Tsakiropoulos, P., Smith, PA. and Miodownik, AP. (1993) 'Extension of the Hall-Petch relation to two-ductile-phase alloys'. Philosophical Magazine A: Physics of Condensed Matter, Structure, Defects and Mechanical Properties, 67 (2). pp. 515 - 531. ISSN: 0141-8610
Fan, Z. and Miodownik, AP. (1993) 'The deformation behaviour of alloys comprising two ductile phases-II. Applications of the theory'. Acta Metallurgica Et Materialia, 41 (8). pp. 2415 - 2423. ISSN: 0956-7151
Fan, Z. and Miodownik, AP. (1993) 'The deformation behaviour of alloys comprising two ductile phases- I. Deformation theory'. Acta Metallurgica Et Materialia, 41 (8). pp. 2403 - 2413. ISSN: 0956-7151
Fan, Z. and Miodownik, AP. (1993) 'On the fracture toughness of α-ß titanium alloys'. Journal of Materials Science Letters, 12 (21). pp. 1665 - 1668. ISSN: 0261-8028
Jiang, X., Chen, Z., Wang, Y. and Zhou, D. (1992)
'The crystalline to quasicrystalline phase transformation in rapidly solidified Al
Rowe, WB., Cheng, K. and Ives, D. (1992) 'An intelligent design system for recessed hydrostatic journal bearings'. Wear, 159 (1). pp. 95 - 105. ISSN: 0043-1648
Huang, Y. (1992) 'DIFFUSION BONDING OF SUPERPLASTIC LC4-AI ALLOY'. Acta Metall Sin, 28 (9). pp. 81 - 86.
Yang, Q. and Butler, C. (1992) 'Microprocessor based 3 D optical fibre position sensor for precision dimensional inspection'.4th International Symposium on Dimensional Metrology in Production & Quality Control (ISMQC). Tampere. 8 Proc. the 4th International Symposium on Dimensional Metrology in Production & Quality Control (ISMQC). pp. 270 - 278.
Kaplunov, YD. and Nol'de, EV. (1992) 'Two-parametric asymptotic analysis of dynamic elasticity equations for the case of plate bending'. Prikladnaya Matematika i Mekhanika, 56 (5). pp. 750 - 755. ISSN: 0032-8235
Huang, Y., Cui, J. and Ma, L. (1992) 'Interfacial atomic-reaction model for diffusion bonding of metals'. Acta Metallurgica Sinica Series B, Process Metallurgy & Miscellaneous, 5 B (4). pp. 268 - 273. ISSN: 1000-9450
Huang, Y., Cui, JZ. and Ma, L. (1992) 'An investigation of diffusion bonding in aluminum alloys using a Gleeble1500'.International Conference on Physical Simulation. Delft, Netherlands. 8 - 10 June.
Butler, C. and Yang, Q. (1992) 'A smart sensor for precision position measurement'.International Conference on Mechatronics the Integration of Engineering Design. Scotland. 8 Proc. International Conference on Mechatronics the Integration of Engineering Design.
Ji, S., Dai, X. and Wang, W. (1992) 'Investigation on the Binder in Phenolic-Ester Cold-Setting System (in Chinese)'. Adhesion in China, 1992 (2). pp. 11 - 15. ISSN: 1001-5922
Ji, S. and Yang, G. (1992) 'Gas generators to harden the resin-bonded sand system for foundry industry (in Chinese)'. Research Studies On Foundry Equipment, 1992 (1). pp. 36 - 41. ISSN: 1004-6178
Ji, S., Dai, X. and Wang, W. (1992) 'The Study on the Technical Properties of the Ester Cured Phenolic Resin Cold-Setting System and Some Influence Factors (in Chinese)'. Rejiagong Gongyi/Hot Working Technology, 1992 (2). pp. 3 - 8. ISSN: 1001-3814
Nolde, E., Kaplunov, J. and Veksler, ND. (1992) 'Asymptotic Description of the Peripheral Waves in Scattering of a Plane Acoustic Wave by a Spherical Shell'. Acustica United with Acta Acustica, 76 (1). pp. 10 - 19. ISSN: 1610-1928
Chen, Z., Jiang, X., Wang, Y., Zhou, D., Qian, C., Huang, P., et al. (1992) 'Multicomponent AlCuFeMn, AlCuFeCr and AlCuFeCrMn quasicrystals'. Scripta Metallurgica et Materiala, 26 (2). pp. 291 - 296. ISSN: 0956-716X
Ji, S. and Yang, G. (1992) 'Gas Generator for Coldbox Process (in Chinese)'. Research Studies on Foundry Equipment, 1992 (01). pp. 16 - 21.
Huang, Y. and Ma, L. (1992) 'ATOMIC REACTION MODEL FOR DIFFUSION BONDING OF METALS'. Acta Metall Sin, 28 (1). pp. 90 - 94.
Ji, S. and Yang, G. (1992) 'Cold box core-making in casting manufacturing (in Chinese)'. Research Studies On Foundry Equipment, 1989 (1). pp. 12 - 16.
Darwish, MS., Whiteman, JR. and Bevis, MJ. (1992) 'Numerical modelling of viscoelastic liquids using a finite-volume method'. Journal of Non-Newtonian Fluid Mechanics, 45 (3). pp. 311 - 337. ISSN: 0377-0257