Mikhailov, SE. (2023) 'Stationary anisotropic Stokes, Oseen and Navier–Stokes systems: Periodic solutions in ℝⁿ'. Mathematical Methods in the Applied Sciences, 46 (9). pp. 10903 - 10928. ISSN: 0170-4214 Open Access Link

Gao, X., Jiang, W., Lu, Y., Ding, Z., Liu, J., Liu, W., Sha, G., Wang, T., Li, T., Chang, ITH. and Zhao, Y. et al. (2023) 'Excellent strength-ductility combination of Cr26Mn20Fe20Co20Ni14 high-entropy alloy at cryogenic temperatures'. Journal of Materials Science and Technology, 154. pp. 166 - 177. ISSN: 1005-0302

Dandan, L., Wang, B., Han, Y. and Stephen, G. (2023) 'A Comparison of Two Types of Acoustic Emission Sensors for the Characterization of Hydrogen-Induced Cracking'. Sensors, 23 (6). pp. 1 - 16. ISSN: 1424-8220 Open Access Link

Alaswad, S., Kalganova, T. and Awad, W. (2023) 'Investigating the Value of Using Emotionally Intelligent Artificial Conversational Agents to Carry out Assessments in Higher Education: Review'.International Conference on IT Innovation and Knowledge Discovery (ITIKD). Manama, Bahrain. 8 - 9 March. IEEE. pp. 1 - 5.

Moosa, J., Awad, W. and Kalganova, T. (2023) 'Accuracy and Privacy Evaluation of detected communities using Attributed-Based Label Propagation Method'.International Conference on IT Innovation and Knowledge Discovery (ITIKD). Manama, Bahrain. 8 - 9 March. IEEE. pp. 1 - 6.

Moosa, J., Awad, W. and Kalganova, T. (2023) 'COVID-19 Contact-Tracing Networks Datasets'.International Conference on IT Innovation and Knowledge Discovery, ITIKD 2023. Manama, Bahrain. 8 - 9 March. IEEE. pp. 1 - 4.

Chattoraj, S. and Kalganova, T. (2023) 'Generation and retrieval of procedural memory using natural intelligence for an articulated robot'.International Conference on IT Innovation and Knowledge Discovery, ITIKD 2023. Manama, Bahrain. 8 - 9 March. IEEE. pp. 1 - 6.

Ansari, S., Navin, AH., Babazadeh Sangar, AB., Vaez Gharamaleki, J. and Danishvar, S. (2023) 'Acute Leukemia Diagnosis Based on Images of Lymphocytes and Monocytes Using Type-II Fuzzy Deep Network'. Electronics (Switzerland), 12 (5). pp. 1 - 15.Open Access Link

Ramagiri, S., Zonuzi, A., Kanfoud, J., Lowe, S., El Masri, E., Marshall, M., Teyeb, A. and Gan, T-H. et al. (2023) 'Optimisation frame work based on machine learning model to improve energy utilisation'. International Conference on Innovations in Energy Engineering & Cleaner Production IEECP23.

Jang, Y. and Shaw, S. (2023) 'A Priori Analysis of a Symmetric Interior Penalty Discontinuous Galerkin Finite Element Method for a Dynamic Linear Viscoelasticity Model'. Computational Methods in Applied Mathematics, 23 (3). pp. 1 - 21. ISSN: 1609-4840 Open Access Link

Lebon, B. (2023) 'directChillFoam: an OpenFOAM application for direct-chill casting'. Journal of Open Source Software, 8 (82). pp. 1 - 4.Open Access Link

Khavari, M., Priyadarshi, A., Morton, J., Porfyrakis, K., Pericleous, K., Eskin, D. and Tzanakis, I. et al. (2023) 'Cavitation-induced shock wave behaviour in different liquids'. Ultrasonics Sonochemistry, 94. pp. 1 - 14. ISSN: 1350-4177 Open Access Link

Chen, H., Hou, P., Zhou, X., Black, L., Adu-Amankwah, S., Feng, P., Cui, N., Glinicki, MA., Cai, Y., Zhang, S., Zhao, P., Li, Q. and Cheng, X. et al. (2023) 'Toward performance improvement of supersulfated cement by nano silica: Asynchronous regulation on the hydration kinetics of silicate and aluminate'. Cement and Concrete Research, 167. pp. 107117 - 107117. ISSN: 0008-8846

Gaitanelis, D., Chanteli, A., Worrall, C., Weaver, PM. and Kazilas, M. (2023) 'A multi-technique and multi-scale analysis of the thermal degradation of PEEK in laser heating'. Polymer Degradation and Stability, 211. pp. 1 - 12. ISSN: 0141-3910 Open Access Link

Pei, E. and Seidel, C. (2023) 'Standardisation efforts of ISO/TC 261 “Additive Manufacturing” 19th Plenary Meeting of ISO/TC 261 “Additive Manufacturing”'. Progress in Additive Manufacturing, 8 (5). pp. 771 - 772. ISSN: 2363-9512 Open Access Link

Abu Amara, A., Liu, G., Eskin, D. and McKay, B. (2023) 'Stability of SiC and Al2O3 Reinforcement Particles in Thermomechanical Processed Direct Chill Cast Al MMnCs'.TMS Annual Meeting 2023. San Diego, CA, USA. 9 - 23 March. Springer Nature Switzerland. pp. 1005 - 1014. ISSN: 2367-1181

Courtenay, J. and Wang, Y. (2023) 'Recent Studies Using HR-TEM on the Fundamental Mechanism of Nucleation of a-Aluminum on TiB2 in TiB D High-Efficiency Grain Refiners'.Light Metals 2023 Symposia (TMS 2023 Annual Meeting & Exhibition). San Diego, CA, USA. 9 - 21 March. Springer Nature Switzerland. pp. 967 - 973. ISSN: 2367-1181

AlAli, D., Manivannan, N. and Xu, Y. (2023) 'A Framework for Effective Design Thinking Based Smart Cities Projects in Qatar'. Smart Cities, 6 (1). pp. 531 - 562.Open Access Link

Dong, X., Feng, L., Nyberg, EA. and Ji, S. (2023) 'The Mechanisms to Improve Creep Resistance in a Die-Cast MgREMnAl Alloy'.TMS Annual Meeting & Exhibition. San Diego, CA, USA. 6 - 23 March. Springer Nature Switzerland. pp. 143 - 150. ISSN: 2367-1181

Tyurnina, AV., Morton, JA., Kaur, A., Mi, J., Grobert, N., Porfyrakis, K., Tzanakis, I. and Eskin, DG. et al. (2023) 'Effects of green solvents and surfactants on the characteristics of few-layer graphene produced by dual-frequency ultrasonic liquid phase exfoliation technique'. Carbon, 206. pp. 7 - 15. ISSN: 0008-6223 Open Access Link

Werner, A., Mendez-Rial, R., Salvo, P., Charisi, V., Piccini, J., Mousavi, A., Civardi, C., Monios, N., Espinosa, DB., Hildebrand, M., Zimmermann, N., Aguirre, IV., Cassina, J., Avendano, DN., Oliveira, H., Caljouw, D., Fazziani, M. and de la Maza, S. et al. (2023) 'Architecture for Predictive Maintenance Based on Integrated Models, Methods and Technologies', in Huang, C-Y., Dekkers, R., Chiu, SF., Popescu, D. and Quezada, L. (eds.) Lecture Notes in Production Engineering. Cham, Switzerland : Springer. , Part F1164. pp. 259 - 274. ISBN 10: 3-031-18641-9. ISBN 13: 978-3-031-18640-0.

Markatos, NG., Mousavi, A., Pippione, G. and Paoletti, R. (2023) 'Industry 4.0-Based Framework for Real-Time Prediction of Output Power of Multi-Emitter Laser Modules during the Assembly Process'. Electronics (Switzerland), 12 (3). pp. 1 - 12.Open Access Link

Muhammad, C. and Chong, TP. (2023) 'A Feasibility Study of Riblets for Aeroacoustics Applications'.INTER-NOISE and NOISE-CON Congress and Conference Proceedings, InterNoise22. Glasgow, UK. 1 - 24 August. Internoise 2022 - 51st International Congress and Exposition on Noise Control Engineering. pp. 3638 - 3649.

Huang, Y. and Jiang, J. (2023) 'A Critical Review of von Mises Criterion for Compatible Deformation of Polycrystalline Materials'. Crystals, 13 (2). pp. 1 - 17.Open Access Link

Kasemsarn, K., Harrison, D. and Nickpour, F. (2023) 'Applying Inclusive Design and Digital Storytelling to Facilitate Cultural Tourism: A Review and Initial Framework'. Heritage, 6 (2). pp. 1411 - 1428.Open Access Link

Shurkin, P., Scamans, G., Barekar, N., Hou, L., Subroto, T. and Barbatti, C. (2023) 'Phase Composition and Microstructure of High Strength AA6xxx Aluminium Alloys with Nickel Additions'. Materials Transactions, 64 (2). pp. 398 - 405. ISSN: 1345-9678 Open Access Link

Wang, S., Wang, B., Zhu, H., Chen, G., Li, Z., Yang, L., Zhang, Y. and Zhou, X. et al. (2023) 'Ultra-high performance concrete: Mix design, raw materials and curing regimes-A review'. Materials Today Communications, 35. pp. 105468 - 105468. ISSN: 2352-4928

Cai, Q., Fang, C., Mendis, C., Chang, ITH. and Cantor, B. (2023) 'Thermal behaviour and microstructure evolution of new ternary eutectic alloy in Al-Cu-Si-Ni system'. Journal of Alloys and Compounds, 941. pp. 1 - 14. ISSN: 0925-8388 Open Access Link

Liang, S., Zhou, X. and Hou, P. (2023) 'Impact of amino acids as performance-controlling additives on the hydration of reactive MgO'.5th International Conference on Innovative Materials, Structures and Technologies. Riga, Latvia. 18 - 30 September. IOP Publishing. pp. 1 - 17. ISSN: 1742-6588 Open Access Link

Ng, KL., Maciejewska, BM., Qin, L., Johnston, C., Barrio, J., Titirici, MM., Tzanakis, I., Eskin, DG., Porfyrakis, K., Mi, J. and Grobert, N. et al. (2023) 'Direct Evidence of the Exfoliation Efficiency and Graphene Dispersibility of Green Solvents toward Sustainable Graphene Production'. ACS Sustainable Chemistry and Engineering, 11 (1). pp. 58 - 66. ISSN: 2168-0485 Open Access Link

Amini, A. and Gan, TH. (2023) 'A Computer Vision-Based Quality Assessment Technique for R2R Printed Silver Conductors on Flexible Plastic Substrates'. Applied Sciences (Switzerland), 13 (2). pp. 1 - 8.Open Access Link

Dimopoulos, A., Zournatzis, I., Gan, T-H. and Chatzakos, P. (2023) 'Multi-Response Optimization of Ti6Al4V Support Structures for Laser Powder Bed Fusion Systems'. Journal of Manufacturing and Materials Processing, 7 (1). pp. 1 - 16.Open Access Link

Winter, M., Jawad, S., Rahman, Z-ASA., Al-Yasir, YIA. and Zeb, A. (2023) 'Dynamical behavior of a cancer growth model with chemotherapy and boosting of the immune system'. Mathematics, 11 (2). pp. 1 - 16.Open Access Link

Choo, Y., Choi, Y. and Ceschin, F. (2023) 'Optimised design process for OBM companies'. International Journal of Design. ISSN: 1991-3761

Morton, JA., Kaur, A., Khavari, M., Tyurnina, AV., Priyadarshi, A., Eskin, DG., Mi, J., Porfyrakis, K., Prentice, P. and Tzanakis, I. et al. (2023) 'An eco-friendly solution for liquid phase exfoliation of graphite under optimised ultrasonication conditions'. Carbon, 204. pp. 434 - 446. ISSN: 0008-6223 Open Access Link

Ansari, S., Navin, AH., Sangar, AB., Gharamaleki, JV. and Danishvar, S. (2023) 'A Customized Efficient Deep Learning Model for the Diagnosis of Acute Leukemia Cells Based on Lymphocyte and Monocyte Images'. Electronics (Switzerland), 12 (2). pp. 1 - 15.Open Access Link

Byerly, A. and Kalganova, T. (2023) 'Towards an Analytical Definition of Sufficient Data'. SN Computer Science, 4 (2). pp. 1 - 23. ISSN: 2662-995X Open Access Link

Morton, J., Khavari, M., Priyadarshi, A., Kaur, A., Grobert, N., Mi, J., Porfyrakis, K., Prentice, P., Eskin, D. and Tzanakis, I. et al. (2023) 'Dual frequency ultrasonic cavitation in various liquids: High-speed imaging and acoustic pressure measurements'. Physics of Fluids, 35 (1). pp. 1 - 13. ISSN: 1070-6631 Open Access Link

Du, G., Zhou, L., Li, Z., Wang, L. and Lü, K. (2023) 'Neighbor-aware deep multi-view clustering via graph convolutional network'. Information Fusion (IF 17.564), 93 (May 2023). pp. 330 - 343. ISSN: 1566-2535

Priyadarshi, A., Subroto, T., Nohava, J., Pavel, S., Conte, M., Pericleous, K., Eskin, D. and Tzanakis, I. et al. (2023) 'Investigation of mechanical properties of Al3Zr intermetallics at room and elevated temperatures using nanoindentation'. Intermetallics, 154. pp. 1 - 9. ISSN: 0966-9795 Open Access Link

Alizadeh, E., Omairey, S. and Zysset, P. (2023) 'Investigating the post-yield behavior of mineralized bone fibril arrays using a 3D non-linear finite element unit-cell model'. Journal of the Mechanical Behavior of Biomedical Materials, 138. pp. 1 - 14. ISSN: 1751-6161 Open Access Link

Zitoun, A., Dixon, S., Kazilas, M. and Hutchins, D. (2023) 'Defect Detection and Imaging in Composite Structures Using Magnetostrictive Patch Transducers'. Sensors, 23 (2). pp. 1 - 16. ISSN: 1424-8220 Open Access Link

Cai, T., Hou, P., Chen, H., Zhao, P., Du, P., Wang, S., Zhou, X., Wang, X. and Cheng, X. et al. (2023) 'Effects of nanosilica on supersulfated cements of different clinker-activation degree'. Construction and Building Materials, 365. pp. 130118 - 130118. ISSN: 0950-0618

Ceschin, F., Petrulaityte, A., Musango, JK. and Mwiti, BK. (2023) 'Mainstreaming gender in energy design practice: Insights from companies operating in sub-Saharan Africa's energy sector'. Energy Research and Social Science, 96. pp. 1 - 13. ISSN: 2214-6296 Open Access Link

Ruttun, RD. and Macredie, RD. (2023) 'Explaining The Effects Of Individual Differences On Learners’ Use Of Hypermedia Learning Systems'. Journal of Educational Multimedia and Hypermedia, 31 (4). pp. 275 - 332. ISSN: 1055-8896 Open Access Link

Heath, C., Yin, L., Garaj, V., Choi, Y. and Bennett, J. (2023) 'The Secret Garden: Engaging Chinese Audiences in Immersive Exhibition AR/VR Visitor Journeys'. Journal of Design Research, 0 (submitted). ISSN: 1748-3050

Wang, P., Bai, Q., Cheng, K., Zhao, L., Ding, H. and Zhang, Y. (2023) 'Machinability analysis of micro-milling thin-walled Ti-6Al-4V micro parts under dry, lubrication, and chatter mitigation conditions'. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 238 (1-2). pp. 335 - 346. ISSN: 0954-4054

Holroyd, H., Burnett, T. and Scamans, G. (2023) 'Environment-Induced Crack Initiation and Early Stages of Crack Growth in Aluminum Alloys'. Corrosion, 79 (1). pp. 3 - 3. ISSN: 0010-9312

Teyeb, A., Salimi, M., El Masri, E., Balachandran, W. and Gan, TH. (2023) 'Analytical simulation of the microbubble collapsing in a welding fusion pool'. Materials, 16 (1). pp. 1 - 10. ISSN: 1996-1944 Open Access Link

Hashem, M., Gallear, D. and Aldhaen, E. (2023) 'Enhancing the Creativity of Employees in the Education Sector During COVID-19 Pandemic: The Role of Rewards'. Springer International Publishing. pp. 339 - 348. ISSN: 2367-3370

Liu, G., Abu Amara, A., Eskin, D. and McKay, B. (2023) 'Manufacture of Nano-to-Submicron-Scale TiC Particulate Reinforced Aluminium Composites by Ultrasound-Assisted Stir Casting'.TMS2023. San Diego, USA. 1 Springer Nature Switzerland. pp. 339 - 348. ISSN: 2367-1181